North Central Railway Tender

A) Pre-fabricated Pump house and allied accessories- Supply & Installation of Out Door Fitting in all side of Container street light LED Type.(1x 18W) 4 ft long

A) Pre-fabricated Pump house and allied accessories- Supply & installation of Ceiling Fan 48 " With Regulator .

A) Pre-fabricated Pump house and allied accessories- Supply & Installation of Exhaust Fan 18".

A) Pre-fabricated Pump house and allied accessories- Supply and installation of 1.5 Ton Split Ac with Stabilizer. For Electrical Chamber./ Control Room.

A) Pre-fabricated Pump house and allied accessories- One Computer Table Two Chairs and one small Cup board.

A) Pre-fabricated Pump house and allied accessories- 1 No. MS Pipe line size 300 mm from Sump to container including fabrication

A) Pre-fabricated Pump house and allied accessories- Sluice Valve 1 no. for size 300mm along with fitting job

B) Pump and Allied Fittings - Pump sets 40 HP 1 Set = 03 Nos (pump set of 40 HP each along with Electric Motor). Motor and Pump should be of standard manufacturer such as M/s Kirloskar or M/s Crompton Greaves

B) Pump and Allied Fittings - Common skid mounting for pump sets

B) Pump and Allied Fittings - Supply, Installation and testing of basket type in line strainer for pump sets.

B) Pump and Allied Fittings - Suction manifold with fittings and Fitment work

B) Pump and Allied Fittings - Delivery manifold with fittings and fitment work.

B) Pump and Allied Fittings - Butter Fly valve 200mm/150mm

B) Pump and Allied Fittings - Non Return valve 200mm/150mm

B) Pump and Allied Fittings - On Line Flow meter 200/150MB (Main Bore) with fittings 200/150mm

B) Pump and Allied Fittings - Electrical Operated valve 150MB (Main Bore) with fittings.

B) Pump and Allied Fittings - 1.5 Sq mm 6 core copper cable for control of electric valve

B) Pump and Allied Fittings - 1.5 Sq mm 6 core copper cable for control of flow meter.

B) Pump and Allied Fittings - Hydro pneumatic Tank.

B) Pump and Allied Fittings - Cable for pump to control panel 16sq mm 3.5 core including fittings

B) Pump and Allied Fittings - Power Cable of 95 Sq mm 3.5 core Aluminium along with lugs from DG Panel to LT change over and to main control panel.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Supply of MS Pipe of 200 mm dia duly painted with RAVOSOL Duly welded with flange to connect from Distribution Header to each hydrant line of Platform, separately Including handling and laying.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Excavation of Earth Parallel to Track size (600mm x 600mm x 250 mtrs) below from sleeper level including back filling and clearing the extra material from site

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - MS/ Fabricated Spacers like, Tee, Enlarger, reducer, Spool, jointing pieces. Including packing and nut bolts.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Installation of MS pipe line of 200 mm including handling, laying as per site condition

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Set of rubber packing & Gasket for 200 mm

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - SITC of Bends of M. S. 200mm with Flanges, including positioning andwelding etc

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Supply of casing pipe size 400 mm M.S. Without flanges. "A" class fabricated 3.0 Mtr long duly painted with REVOSOL Paint. This is to be installed under the track for in casing ground.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Installation of casing pipe size 400mm MS including Digging under the track and back filling Soil and metal handling the same

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Execution of Road crossing RCC,PCC or Tar Road including cutting laying of pipe and backfilling and repairing.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Cut and Connection in Sump

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Suction Pressure Transducer and Pressure Gauges with fittings

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Delivery Pressure Transducer and Pressure Gauges with fittings.

D) Electrical Control panels and other Items - Control Panel (inclusion of the following (i) to (ix) - (i) Design, fabrication, transportation, supply, erection and commissioning of LT cubical panel3 Phase and neutral 415V. 4 Wire, free standing floor mounted, LT panel made up of 14SWG CRCA (Cold Rolled Carbon Annealed) sheet after seven tank process and painting with EPOXY powder coating. The panel shall consist of suitable rating TPN (Triple pole neutral) tinned copper bus bar supported with DMC/AMC barriers and colour coded with heat shrinkable sleeves. The metering shall be provided as specified The panel shall have short circuit with standing capacity of minimum 50KA (RMS) power frequency test and consist of the switch gear as mentioned below. The panel shall be mounted on channels including supply and fixing as per specification. The complete work has to be carried out by the contractor including masonry work. After execution, all the feeder cables have to 37 be connected to new panels with suitable cable glands as per the requirement of Engineer at site. Air condition provision is to be made for entire control panel. The panel consists:- (ii) 1 No. of 400A, 4 Pole, 36KA,MCCB (Moulded case circuit breaker) & 400 AP changeover for incoming (iii) 4 No. of 100A, 10KA 4 Pole MCCB out going. (iv) 1 No. of 36A, 10KA 4 Pole MCB (Miniature circuit breaker) out going (v) 1 No. of 32 A,10KA 4 Pole MCB out going (vi) Along with multifunctional digital meter similar to model No: EM-VIFPE of M/s HPL make with suitable ratios CTs(Current transformer) along with the selector switches, LED phase indication pilot lamps (3No's), and tinned copper bus bar of 1000V along with rubber chequered sheets of size 1m length of panel of 12 mm thick as per IS 5424-1 No. complete (vii) Suitable set of capacitor 40KVAR with auto manual APF Relay. (viii) VFD (Variable frequency Drive) 1 No. PLC 1 No. HMI, with pressure treasures. (ix) Suitable 40 HP star delta starter with auto manual selection mode and same starter will work on VFD and command will be to VFD by PLC (Programmed Logic Control)

D) Electrical Control panels and other Items - Diesel Generator set silent 125KVA with required Civil Work making a PCC floor as per foundation Drawing of DG Set

D) Electrical Control panels and other Items - 2 KVA Industrial UPS with one hour battery backup with cables.

D) Electrical Control panels and other Items - Supply, erection and connecting of Maintenance free 40 earth by 17.2 mm dia low carbon steel rod coated with 205 microns thick copper 3 mtrs long with clamps and carbon based earth enhancing compound of LORESCO BACKFILL material not less than 40Kgs for each.Exothermic welding and earth connection by SWG GI wire of length up to 6mtrs for connecting the earth to equipment generally confirming to RDSO specification No. RDSO/PE/SPEC/0109/REV. O')-2008. The Earth equivalent to MCML/JEF Techno Solution Pvt.Ltd

D) Electrical Control panels and other Items - SCADA for 500, Data analysis including of PC, LED 41 32"". Keyboard, Printer and allied accessories for communication with various type of small cables to connect control pane to UPS, PC and other as per site requirement in Pump room & Control room. Various type of lugs, cable gland, Sims, terminals etc.