North Central Railway Tender

Supply, erection, Testing & Commissioning of sub main consisting of 2x4 Sq. mm (P & N) PVC insulated and sheathed copper wire multristanded single core 1.1 KV grade alongwith 1.5 Sq. mm PVC insulated 4 copper wire 1.1 KV grade for earthing. (Quantity 1 Mtr. Equal to 02 Nos., wire of 4 Sq.mm of 01 Mtr.each. and 01 No. earth wire 1.5 Sq. mm. of 01 M) (No cable joint is permitted inside the MS conduit pipe cable should be jointed with cable connectors inside the switch board)

Supply, Erection, Testing and commissioning of MS/PVC conduit pipe 25mm dia and 1.6mm thick, recessed in the wall and through the wall by making hole and replastering the same in original condition complete with Tee, elbow, junction box, sadle & Other accessories for sub main wiring.

Excavation of cable trench:- This item shall be operated in conformity with IS:1255 (latest version) i.e. code of practice for installation and maintenance of HT/LT cables. The price shall cover cost of excavation of cable trench in all type of soil for laying LT cables and back filling the same with sieved earth and finishing the surface in its original condition after providing sand, & bricks in cross position. For LT/HT cables the trench shall 6 be 600mm wide x 1000mm deep. In trench the cable shall be covered with river sand at a depth of 100mm below the cable and 100mm above the cable than placing well-burned bricks continuously in crossposition through out the cable route in the ground. The bottom of the trench should level free from stones and sharp edge of rocks etc. At the termination a loop of 5 meter (approx) cable shall be kept as allowance and loops rings be formed as per the site condition, in the ground, The cost shall include the cost of all materials i.e. sand, bricks, cable route markers (grouted in the earth firmly with cement concrete so that it can not be uprooted by miscreants) etc at 25m. interval and each turn of the cable.

BLDC fan :- Supply, Erection, Testing & Commissioning of 5 star rated super energy saving efficient BLDC Ceiling Fan, sweep size 1200mm., down rod length as per site requirement, power factor greater 7 than 0.98 with Electronic Regulator & double ball bearing and MS Flat size 50 X 5mm clamp of suitable size with hanging hook, nut bolt washer etc & Connection shall be taken with twin cord flexible PVC insulated copper wire size 48/0.2 mm., 03 blades of Aluminium with power consumption not more than 28 Watt, Warranty 03 years, required make - RR, Havells, Crompton, Bajaj bee 5 star rated BLDC super energy efficient ceiling Fan with double ball bearing, power 28 W. cat-Fan super efficient-ceiling BLDC

"Supply, Erection, Testing & Commissioning of luminaire complete with all accessories , 18/20 watt, 04 feet LED tube light fitting & Tube with suitable current control driver circuit, suitable for surface mounting and connection with PVC copper flexible wire of 23/76 as per Rly. specification attached.

Supply, Erection, Testing and commissioning of Single earth electrode of 50mm dia 3000mm long GI Pipe class B conforming to IS: 1239 latest complete with earth box including connection from earth electrode to MDB/SDB/poles/With 8 SWG GI Wire

Horizontal boring of cable duct at 1.4 to 2.1 mtr.depth from the bottom of sleeper /ground lable and 10 laying of 120 mm dia HDPE DWC pipes for cable crossing under track / road .The work shall be done as per extant practice and instruction of site engineer.It includes supply of DWC/HDPE pipes conforming to IS14930(Part:2:2001)

pole fittings :- supply, erection, Testing & Commissioning of energy efficient LED street light fitting 11 60 Watt outdoor complete street light fittingpressure die cast aluminium (PDC) body with make embosed on PDC body and complete with all accessories/ components and connection with PVC copper wire 2.5sq.mm size multicore and fixing arrangement as per site requirement.The technical parameters will generally conform to relevant Railway specification.

Laying/Cleating erection, Testing & Commissioning of HT/LT Cable 03/04 Core on wall with all accessories & refilling of cable trench (as per IE rule) after laying of cable (Cable will be supplied by Rly free of cost at Cosignee Depot)

Supply, Erection, Testing & Commissioning of material of concealed wiring point of 3 pin power 13 socket 20 Amp./230 V in sheet steel enclosure with 20 Amp. Single pole MCB-SP, 3 pin metal plug and wiring by 6 sq. mm. PVC insulated multistranded copper wire single core in recessed steel PVC conduit pipe 25 mm. 1.6mm. thick dia with 1.5 sq. mm. PVC insulated copper wire complete with band, MS Junction Box etc. complete with replastering of wall. (Separate circuit to be drawn from SDB.)

Supply, fixing, testing & mmissioning of MCB DB single phase with RCBO, m.s. enclosure, I/C -DP RCBO of 40Amp - 1No, O/G: SP MCB of 6A - 32A - 8Nos, as per specifications. 30 mA

Supply, Erection, Testing and Commissioning of energy efficient Rechargeble Turbo Inverter LED Blub 12 watt having back up time 4 hrs., and normal and turbo charging mode, having min rated lithium battery Capacity of 2600 mAh with rated voltage of 100-300 V AC make: Halonix, C&S, Philips

Supply,Erection,, Testing and Commissioning of GI pipe 'B' class of minimum 50 mm. dia, suitable for cable protection or underground rail/road crossing with fixing clamp at least 03 Nos. for one pipe of MS flat of 50 x 6 mm. size clamp duly Aluminum painted

"Supply, Erection, Testing and commissioning of hot dip galvanized octagonal pole 5 Mtr. long 17 confirming to IS 2629/BSEN ISO 1461 or equivalent including casting, muffing with cement concrete foundation (1:2:4) painting, earthing etc. the pole shall be completewith holes, Anchor bolts, bottom plate etc. As per Tech. Specification/site requirement, IS/IE rules of Single Arm type with 1.5 feet to 2 feet long.

Supply, Erection, Testing and Commissioning of LT Panel Board fabricated floor mounted made of MS sheet 14 SWG complete floor mounted front operated, mounted of MS channel 75x40x3 mm. painting by one coat of red oxide primer with two coats of approved synthetic enamel paint complete with top/bottom removable gland as required double compression type cable glands earth bus, hinged and lockable doors, dust and vermin 18 proof complete with all inter connections by PVC insulated multistranded copper wire with suitable capacity BUS Bar for Consisting of the follwing Items. MCCB - FP - 25 KA - 250 Amp. = 01 No. for incoming side MCCB - FP 25 KA - 125 Amp. = 04 Nos. for out going side C) CT300/5-03 NOs. operated with three phase panel mounted electronic energy meter, Digital Type volt meter size 96x96 mm. with selector switch & 03 Nos. LED Indicator Note - Panel should be outdoor type with canopy and mounted on masonry post at least 2 feet in height form ground level to avoid submerging in rains.

"150 Liters/hour L Water Cooler -CAPACITY/ENERGY - TYPE - Storage, Cooling Capacity Litres/Hour - 150 Liters/hour, Storage Capacity - 150, Maximum Energy Consumption (Watt) - 1550 Watt for 150 ltr/hr cooling cap., Power Factor - 0.86, CERTIFICATION - Conformity to Indian standard - IS: 1475 latest, ISI MARKED - Yes, CM/L No and date - 9159385, Availability of Test Report from Central Govt/NABL/ILAC 19 accredited lab to prove conformity to specification - No Test Report Number & Date - NA, Name & address of the Lab - NA, GENERIC - Eco-Friendly (Non CFC Refrigerant) - Yes, Water Tank sheet material and thickness - Stainless Steel (Grade AISI 304) with PUF insulation, thickness > =0.6 mm, Water Tank cover and lid bottom Sheet material - High Impact Polystrene(HIP), Water Tank cover and lid bottom Sheet Thickness - 1.5, Cooler Cabinet sheet material - Stainless Steel (Grade AISI 304), Cooler Cabinet sheet thickness - 0.8, Warranty on Machine - 2, Warranty on Compressor - 5 "

Supply, Erection, Testing and commissioning of 40 Watt LED 2 X 2 Colour Temperature (+/-500K) -6000 Deg K ceiling mounting type

Supply, Erection, Testing & Commissioning of Exhaust Fan 380mm Sweep 1400 RPM four blades with louvers suitable to work on 230 volt AC supply connection shall be taken with twn cord flexible PVC insulated copper wire size 48/0.2mm exhaust fan to be fixed on wall with MS reg. bolt nut washer etc.