Noida Metro Rail Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Noida Metro Rail Corporation Limited - NMRC Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date13 May 2024
Closing Date12 Jun 2024
Tender Amount₹ 3,25,79,399
Costs
EMD
₹ 3,25,794Document Cost
₹ 23,600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NMRCL_924657_1Bid Award Id
ViewTender No
NMRC /E-M/Rate contract /315/2024Tender Authority
Noida Metro Rail Corporation Limited ViewPurchaser Address
-Website
http://http://www.nmrcnoida.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Fire Fighting Pumps
-
-
-
Repairing and re-winding of Fire Pump(Hydrant), 50 HP rating. Rate is inclusive of removing damaged winding, refixing after repair and starting the units
5
140000
-
Repairing and re-winding of Fire Pump(Hydrant), 75 HP rating. Rate is inclusive of removing damaged winding, refixing after repair and starting the units
1
49000
-
Repairing and re-winding of Fire Pump(Hydrant), 150 HP rating. Rate is inclusive of removing damaged winding, refixing after repair and starting the units
1
91000
-
Repairing and re-winding of Fire Pump(Jockey), 7.5 HP rating. Rate is inclusive of removing damaged winding, refixing after repair and starting the units
3
14700
-
Repairing and re-winding of Fire Pump(Jockey), 10HP rating. Rate is inclusive of removing damaged winding, refixing after repair and starting the units
1
6300
-
Repairing of Fire Pump(standby), 153 BHP rating. Rate is inclusive of removing damaged winding, refixing after repair and starting the units
1
13300
-
Repairing and providing mechanical seal of Fire Pump(Hydrant), 75, 50 , 150 HP rating. Rate is inclusive of removing damaged seal, refixing after repair and starting the units
10
175000
-
Other Pumps of domestic use
-
-
-
Flushing Pumps (Total 42 pumps are Installed at 21 stations on Aqua Line)
-
-
-
Servicing, Repairs & replacement of spare parts in Vertical Centrifugal Pumps of Kirloskar Brothers Ltd., make of Model KCIL 15-4 of capacity 15 M3/Hr at the head of 47 Meters complete with 5.5 HP / 4.0 KW 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, Electrical Connections with WPP, testing & commissioning at site complete etc as required.
1
6300
-
Rewinding of Motor with copper winding wire with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor, rates will be consider after all scrap less)
1
4900
-
Overhauling of Pump with replacement of all standard spare like as ball bearings complete, SS Impeller, Diffuser, Shaft, TC bush, Mechanical Seal etc as required
1
23800
-
Domestic & Filter Feed Pumps (Total 84 pumps are Installed at 21 stations on Aqua Line)
-
-
-
Servicing, Repairs & replacement of spare parts in Vertical Centrifugal Pumps of Kirloskar Brothers Ltd. make of Model KCIL 10-6 of capacity 10 M3/Hr at the head of 48 Meters complete with 3.0 HP / 2.2 KW 3 Phase, 2900 RPM Induction Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, testing & commissioning at site complete etc as required.
1
6300
-
Rewinding of Motor with copper widing wire along with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor including all scrap material less)
1
4900
-
Overhauling of Pump with replacement of standard class spare like as ball bearings complete, SS Impeller , Diffuser, Shaft TC Bush Mechanical Seal etc as required.
1
23800
-
De-watering sump Pumps (Total 22 pumps are Installed at 11 stations on Aqua Line)
-
-
-
Servicing, Repairs & replacement of spare parts in Vertical Centrifugal Dewatering non-clog Sump Pumps of Kirloskar Brothers Ltd. make of Model 1500 CW of capacity appx. 16 M3/Hr at the head of 12 Meters complete with 2.0 HP / 1.5 KW 3 Phase, Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without Panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, testing & commissioning at site complete etc as required.
2
35000
-
Rewinding of Motor with copper winding wire along with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor after less old scrap)
2
6160
-
Overhauling of Pump with replacement of standard spare like ball bearings complete Mechanical Seal, O ring kit + Oil, Shaft, impeller etc as per required.
2
18200
-
Supply & installation of Vertical Centrifugal Dewatering non-clog Sump Pumps of Kirloskar Brothers Ltd. make of Model 1500 CW of capacity appx. 16 M3/Hr at the head of 12 Meters complete with 2.0 HP / 1.5 KW 3 Phase, Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. complete etc as per required by user.
2
13160
-
Submersible Pumps in Bore Wells (Total 21 pumps are Installed at 21 stations, 2 pumps are installed at depot and 1 at Residential complex on Aqua Line)
-
-
-
Servicing, Repairs & replacement of spare parts in Centrifugal Submersible Pumps of CRI Pumps (P) Ltd. make of Model 4M-13/14 or 4M-8E/17 or S6G-22/5 of capacity 9-16 M3/Hr at the head of 50-90 Meters complete with UP TO 5.0 HP / 3.7 KW 3 Phase, 2900 rpm, Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. AC installed in the bore well complete etc as required for following items of work without Panel:
-
-
-
Deep in and deep out with safety of pump from Bore Well after disconnection from suction and discharge plumbing work, taking out of column pipes from the bore, stacking / storing safe, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation in the Bore Well with existing column pipes, re-connection of suction & discharge plumbing work, testing & commissioning at site complete etc as required.
3
52500
-
Rewinding of submersible Motor with F class insulation & winding wire after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor)
3
15540
-
Overhauling of Pump with replacement of thrust bearings complete motor & pump shaft, GM bush, impeller, thures Plate etc as required.
3
14700
-
Supply & installation of Centrifugal Submersible Pumps of CRI Pumps (P) Ltd. make of Model 4M-13/14 of capacity 9-16 M3/Hr at the head of 50-90 Meters complete with 5.0 HP / 3.7 KW 3 Phase Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. AC installed in the bore well complete etc as required.
5
31500
-
Domestic Water Pumps installed at Depot - 2 Nos.
-
-
-
Servicing, Repairs & replacement of spare parts in Horizontal Centrifugal Pumps of Crompton Greaves, make of Model MBN 7.52/2017 of capacity 20 M3/Hr at the head of 35 Meters complete with 5.5 KW / 7.5 HP 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, Electrical Connections with WPP, testing & commissioning at site as per required.
1
17500
-
Rewinding of Motor with copper winding wire with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor,after old scrap less)
1
6440
-
Overhauling of Pump with replacement of standard class ball bearings, complete Bush Sleev , impeller ,shaft etc as required.
1
5320
-
Supply & installation of Horizontal Centrifugal Pumps of Crompton Greaves, make of Model MBN 7.52/2017 of capacity 20 M3/Hr at the head of 35 Meters complete with 5.5 KW / 7.5 HP 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required
1
51030
-
Treated Water Pumps Installed at Depot - 2 Nos.
-
-
-
Servicing, Repairs & replacement of standard class spare parts in Horizontal Centrifugal Pumps of Crompton Greaves, make of Model MBNH10.2/2017 of capacity 33 M3/Hr at the head of 45 Meters complete with 7.5 KW / 10 HP 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, Electrical Connections with WPP, testing & commissioning at site complete etc as required.
2
35000
-
Rewinding of Motor with copper winding wire with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor)
2
19600
-
Overhauling of Pump with replacement of standard class ball bearings, complete bush,sleeve, shaft, impeller etc as required.
2
13440
-
Supply & installation of Horizontal Centrifugal Pumps of Crompton Greaves, make of Model MBNH10.2/2017 of capacity 33 M3/Hr at the head of 45 Meters complete with 7.5 KW / 10 HP 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required
1
55650
-
Submersible Pumps in Bore Wells (1 pump is installed at depot on Aqua Line)
-
-
-
Servicing, Repairs & replacement of spare parts in Centrifugal Submersible Pumps of KSB Pumps make of Model BPH33/47HB235 of capacity 90 M3/Hr at the head of 54 Meters complete with 10.0 HP / 7.7 KW 3 Phase, 2900 rpm, Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. AC installed in the bore well complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from Bore Well after disconnection from suction and discharge plumbing work, taking out of column pipes from the bore, stacking / storing safe, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation in the Bore Well with existing column pipes, re-connection of suction & discharge plumbing work, testing & commissioning at site complete etc as required.
1
17500
-
Rewinding of submersible Motor with submersible copper winding wire along with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor after old scrap less)
1
11200
-
Overhauling of Pump with replacement of standard class thrust bearings, complete motor & Pump shaft sleev, thures plate etc as required.
1
7700
-
Supply & installation of Centrifugal Submersible Pumps of KSB make of Model BPH33/47HB253 of capacity 90 M3/Hr at the head of 54 Meters with 10.0 HP / 7.7 KW 3 Phase Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. AC installed in the bore well complete etc as per required.
2
111412
-
De-watering sump Pumps at Depot (Total 6 Nos. pumps 1 for Utility Gallery, 2 DCO store and 3 in Workshop are Installed)
-
-
-
Servicing, Repairs & replacement of spare parts in Vertical Centrifugal Dewatering non-clog Sump Pumps of Crompton Greaves make of Model CDPJ550 of capacity 2 to 9 M3/Hr at the head of 2 to 9 Meters complete with 01 HP / 0.75KW 1 Phase, Submersible Induction Motor suitable for operation on 230 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, testing & commissioning at site complete etc as required.
3
8400
-
Rewinding of Motor with copper winding wire with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor)
3
9240
-
Overhauling of Pump with replacement of standard class ball bearings complete mechanical seal, o ring kit + oil shaft impeller etc as required.
3
11760
-
Water Supply Pumps for Residential Complex at Depot (Horizontal Submersible)
-
-
-
Servicing, Repairs & replacement of spare parts in Horizontal Centrifugal Submersible Pumps of Kirloskar, make of Model KOS1050+ of capacity 40 Metre cube/hr at the head of 36 Meters complete with 7.5 KW / 10 HP 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, Electrical Connections with WPP, testing & commissioning at site complete etc as required.
1
17500
-
Rewinding of Motor with copper winding wire with F Class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor, after all old scrap less)
1
9800
-
Overhauling of Pump with replacement of standard class of ball bearings ,complete shaft sleeve, impeller etc as required.
1
8400
-
Supply of Horizontal Centrifugal Submersible Pumps of Kirloskar, make of Model KOS1050+ of capacity 40metre cube/hr at the head of 36 Meters complete with 7.5 KW / 10 HP 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
1
55706
-
Installation of Horizontal Centrifugal Submersible Pumps of Kirloskar, make of Model KOS1050+ of capacity 40metre cube/hr at the head of 36 Meters complete with 7.5 KW / 10 HP 3 Phase Induction, 2900 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
2
111412
-
(Terrace Fire Pumps at Residential Complex - 10 Nos.)
-
-
-
Servicing, Repairs & replacement of spare parts in Horizontal Centrifugal Pumps of Kirloskar, make of Model KI160L of capacity 54 M3/Hr at the head of 35 Meters complete with 15 KW / 20 HP 3 Phase Induction, 1450 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, Electrical Connections with WPP, testing & commissioning at site complete etc as required.
2
35000
-
Rewinding of Motor with copper winding wire with F Class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor after old scrap less)
2
26600
-
Overhauling of Pump with replacement of standard class of ball bearings, complete shaft ss, sleeve, mechanical seal etc as required.
2
25200
-
(Terrace Fire Pumps at Residential Complex - 2 Nos. Tower G & Cummunity Centre)
-
-
-
Servicing, Repairs & replacement of spare parts in Horizontal Centrifugal Pumps of Kirloskar, make of Model KI160L of capacity 54 M3/Hr at the head of 35 Meters complete with 15 KW / 20 HP 3 Phase Induction, 1450 RPM Motor suitable for operation on 415 Volt 50 Hz. AC complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, Electrical Connections with WPP, testing & commissioning at site complete etc as required.
1
17500
-
Rewinding of Motor with copper winding wire with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor after old scrap less)
1
13300
-
Overhauling of Pump with replacement of standard class ball bearings, complete shaft, ss sleeve, mechanical seal etc as required.
1
12600
-
Booster Pump 1.0HP with 24 Ltr Tank
-
-
-
Dismantling the pump from foundation after disconnection from WPP, suction and discharge plumbing work, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation on foundation, re-connection of suction & discharge plumbing work, Electrical Connections with WPP, testing & commissioning at site complete etc as required.
1
2800
-
Rewinding of Motor with copper winding wire with F class insulation after removing burnt copper wires complete etc. as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor after old scrap less)
1
2100
-
Overhauling of Pump with replacement of standard class ball bearings, complete shaft, ss sleeve, mechanical, Impeller etc. as required.
1
2800
-
Supply of Booster pump of 1.0 HP with 24 Ltr
1
9100
-
Staff quarters borewell
-
-
-
Servicing, Repairs & replacement of spare parts in Centrifugal Submersible Pumps of KSB Pumps make of Model BPH33/47HB235 of capacity 360lpm at the head of 54 Meters complete with 5 KW / 7.5 HP, 3 Phase, 2900 rpm, Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. AC installed in the bore well complete etc as required for following items of work without panel:
-
-
-
Dismantling the pump from Bore Well after disconnection from suction and discharge plumbing work, taking out of column pipes from the bore, stacking / storing safe, shifting to workshop, re-assembling after servicing / repair in workshop and re-installation in the Bore Well with existing column pipes, re-connection of suction & discharge plumbing work, testing & commissioning at site complete etc as required.
1
7000
-
Rewinding of submersible Motor with submersible copper winding wire along with F class insulation after removing burnt copper wires complete etc as required (Rates considering the salvage value of old dismantled copper wire which shall be retained by the contractor after old scrap less)
1
9800
-
Overhauling of Pump with replacement of standard class thrust bearings, complete motor & Pump shaft sleev, thures plate etc as required.
1
8400
-
Supply & installation of Centrifugal Submersible Pumps of KSB make of Model BPH33/47HB253 of capacity 360 LPM at the head of 54 Meters with 5Kw / 7.5 HP 3 Phase Submersible Induction Motor suitable for operation on 415 Volt 50 Hz. AC installed in the bore well complete etc as per required.
1
52038
-
CABLES(Stations and Depot)
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE Al power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
-
-
-
Above 35 sq. mm and upto 95 sq. mm
250
63350
-
Above 95 sq. mm and upto 185 sq. mm
500
154000
-
Laying of one number PVC insulated and PVC sheathed / XLPE Al power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required
-
-
-
Upto 35 sq. mm
300
16800
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE Al power cable of 1.1 KV grade of following size on wall surface as required
-
-
-
Upto 35 sq. mm
5000
315000
-
Above 35 sq. mm and upto 95 sq. mm
200
33600
-
Protective Earthing
-
-
-
Providing & fixing of GI strips for interconnecting to earthing stations, panels, DBs etc. of the following sizes in built-up trenches/surface/wall/ground complete with holes & fixing/jointing/terminating accessories etc.( Quantity shall be paid as per the actual measurement as executed)
-
-
-
70 mm x 10 mm GI strip
50
22400
-
50 mm x 6 mm GI strip
100
42000
-
25 mm X 6 mm GI strip
100
35000
-
25 mmX3mm GI strips
50
14420
-
8/6 SWG wire
500
17500
-
Supply, installation and testing of Polyplastic earth electrode inspection housing with removable covers capable to handle up to 8 tons load. This specification will meet the requirements of mentioned documents & also working as a reference standard: IEC 62561-5 (requirement of earth electrode inspection housings) and NBC : 2016 ( National Building code).The laboratory test must be in accordance with IES 62561-5:2017
100
910000
-
Supply of earth enhancement compound (carbon based with min 95% of fixed carbon content premixed with corrosion resistant cement etc to have set properties) for maintenance free earthing in the earth pits to improve conductivity of earth electrode and ground contact area tested and conforming to the requirements of IEC 62561-7 having following characteristics along with the user manual:
5000
350000
-
RoHS tested Earth Enhancement Compound tested by NABL accredited lab in compliance to IEC 62561-7 with a resistivity some with a resistivity of 0.12 ohm-m.
-
-
-
An earth enhancing compound shall be tested for Leaching Test, Corrosion Test, Resistivity Test & Sulphur Test.
-
-
-
Shall not pollute the soil or local water table and meets environmental friendly requirements for landfill, shall not be explosive & shall not cause burns, irritation to eye, skin etc. In this regard “Safety Data Sheets” shall be submitted by the manufacturers.
-
-
-
Marking: The Earth enhancement material shall be supplied in sealed, moisture proof bags. These bags shall be marked with Manufacturer’s name or trade name, quantity etc.
-
-
-
PLATE EARTHING- GI Plate Electrode
-
-
-
Providing and making plate earthing including the cost of 600 mm x 600 mm x 6.3 mm GI plate electrode, 50 mm dia GI watering pipe, GI funnel with all earth work, Disconnecting links, complete etc as required as per IS 3043:1987 for earthing.
20
336000
-
Pipe earthing - GI Pipe electrode
-
-
-
Providing and making Earth terminations with 50 mm dia GI perforated pipe complete with 15mm GI watering pipe with funnel with wire mesh etc. complete as per specification and drawing as required for LA system
50
266000
-
30 m High Mast System
-
-
-
Rectification of 30m High mast including dismantling and reinstallation
5
17500
-
Rectification of lights at height at 25 feet & above
150
1785000
-
LIGHTNING PROTECTION
-
-
-
Supplying and installation of the stainless steel SS-304 air terminations, base plate & clamping as required
150
63840
-
Supply, laying and fixing of the GI horizontal & vertical conductor of following sizes on surface/wall/parapet/shaft complete with joints, bimetallic connectors, testing links & other fixing accessories and clamping/ connection with earth terminations as per specifications & drawing as required.
-
-
-
25 x 3 mm thick GI Strip
100
35000
-
32 x 6 mm thick GI Strip
100
57400
-
25 x 6 mm thick GI Strip
100
42000
-
Supply of 20KVA, 415 V, 1:1 Delta-star Isolation transformer with neccesary accessories complete etc as required.
1
63000
-
Rewinding of 20 KVA, 15 KVA, 415 V, 1:1 Delta-star Isolation transformer.
2
56000
-
Providing services of following qualified & eligible technical workmen for day to day Electrical work/Maintenance work as per requirement of NMRC.
-
-
-
Electrician 4 nos.
144
4536000
-
Repair of flow switches used for water flow status; MODEL WFD60 system sensor make; minimum flow rate for alarm 4-10 gpm
4
11200
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required
-
-
-
Group C (non residential building)
300
509460
-
Group A (1-2 & 3 Bedroom houses)
300
354900
-
Supply and fixing Two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
200
84000
-
Repair/rewinding of 300mm , 450mm dia exhaust fan including dismantling and reinstalltion after repair
60
33600
-
Repair of 300 mm , 450 mm dia exhaust fan including dismantling and reinstallation after repair
20
14000
-
Repair of pedestal fans of 400 mm sweep ( Crompton or Bajaj or Orient make )
20
14560
-
Repair/Rewinding of Ceiling fan of 1400 OR 1200 mm sweep
20
12600
-
Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each complete with cutting of CC & repairing the same if required.
100
70000
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required
100
49000
-
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
100
35000
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
50
49000
-
Supply & fixing 4 way MCB box waterproof
10
49000
-
Provision of power supply for X- ray machine & DFMD through SS channel
-
-
-
Supply & installation of 50 mm Square hollow SS pipe 1.5 mm thickness including cutting, grinding etc as per scope of work and as per site requirement for provision of supply for x-ray machine & DFMD. Specification of SS channel shall be as per employer requirement of the tender.
450
220500
-
Supply & installation of 100*100 mm, 5 mm thick SS base plate in roof/wall with four suitable fastner as per site requirement.
120
33600
-
Fixing/grouting of DFMD with 4/2 nos. suitable size of screw/fastners.
46
322000
-
Rewiring/laying of wire/cables (armoured/unarmoured) from its existing position size upto 10 sq mm 3/4 core cable of X-BIS machine/DFMD supply in arrangement of SS pipe and switch/socket as per BOQ item no 19.1 to 19.4 complete with routing of wire/cable making hole in SS pipe, termination and earthing etc as per site requirement.
450
56700
-
Supply, laying and fixing of 3 core cable size 2.5 sq mm, PVC/XLPE FRLS unarmoured copper cables on existing trench/cable tray/wall/truses.in SS pipe with heavy duty GI clamps/saddle of suitable size including termination of cables with suitable size of crimping sockets and glands and dismantling of existing cable and its accessories from existing location as per latest IS code & practice.
450
157500
-
Supply & installation of top plug of 6A, make as per Employer requirement
50
1400
-
Supply & installation of top plug of 16A, make as per Employer requirement
50
2450
-
Supply, installation, modification of addition ABB make 1600A 4P 50kA ACB with LSIG release & standard accessories consisting of Digital multifunction meter, CTS, control MCB & phase indication lamps
1
350000
-
Supply, installation, testing & commissioning of Front operated front access wall mounted TPN box suitable for outdoor duty, dust and vermin proof( minimum protection 54) along with canopy for avoiding any rain water ingress at RCC level to house 3 no. of TPN of 63A each for VRF ODu units. This includes drilling and fixing of box on wall, fixing of 3 no. of 63A TPN inside the box with suitable spacing between them, making proper holes from top or bottom for incoming and outgoing cables via gromet etc, making all connections with neccessary accessories complete etc as required. Approximate dimensions of Box is 80*18*30 cm (length*depth*height)
21
382200
-
Supply, Installation, testing & commissioning of DG battery charger of supply 220V AC input 12V DC , 10A of Max Power supply.
2
15400
-
Providing, Installation, testing & commissioning of MCX-41 coil 220V installed at LT panel
4
112000
-
Supply & fixing of MOO 31 240V contactor for LT Panel timer set 220 V
2
2562
-
Schedule B : Critical spares required for maintenance.
-
-
-
MV Switch gear(Stations & Depot)
-
-
-
Red/Yellow/Blue/Amber/Green On/Off indicating lamps ( L&T- ESBEE, Schneider make)
240
36000
-
Relays of following types compatible with existing system
-
-
-
Voltage monitoring relay(VMR) with phase sequence , VCT D2, AUX 230V ac, 3P3W (Make Minilec)
20
77000
-
Voltage monitoring relay(VMR) with phase sequence , VMR D2, AUX 415V ac, 3P3W (Make Minilec)
50
192500
-
Voltage monitoring relay(VMR) 415V ac, type 1C/O (Make L&T )
100
385000
-
VMRT; 300-400V TEKNIKA
3
10500
-
VMRG ; 300-400V TEKNIKA
3
10500
-
Thermal overload relay OLR WITH BUILT IN SPR PROTECTION of Schneider make following rating :
-
-
-
90-150A; TA25DU5M LRD3363
3
37506
-
12-18A, LRD21
15
54810
-
4-6A
15
38415
-
THERMAL OVER LOAD RELAY,OLR WITH BUILT IN SPR PROTECTION ABB make
-
-
-
3.5A-5A; type TA25DU5M
3
2910
-
10A-14A; Type TA25DU14M
9
8730
-
45A-63A; type TA75DU63
7
20615
-
Thermal overload relay (Legrand) : RTX40,10A
13
30563
-
OLR THERMAL WITH INBUILT SPPR FEATURE; type MN2; 3-5A; make L&T
3
4950
-
Phase failure relay S2VMR3, 2 CO MINILEC
50
91500
-
Phase failure relay VSP D1; 1 CO MINILEC; 240V ac
6
5100
-
Auxiliary Relay 4C/O - 230V AC (make SCHNEIDER)
15
13365
-
Auxiliary Relay 2C/O - 230V AC (make OMRON)
15
67500
-
AUX RELAY,12V and 24V DC,SALZER
30
119400
-
Auxiliary Relay 4C/O, 14 pin - 230V AC (make salzer)
4
12800
-
Auxiliary Relay 4C/O , 3A, 230V AC (make Omron)
10
29500
-
Auxiliary Relay with base 4C/O , 3A, 230V AC (make Omron)
10
63000
-
Auxiliary Relay with base 2C/O , 3A, 230V AC (make Omron)
15
94500
-
Add on contact block 2NO+2NC ( Schneider)
30
22500
-
Add on contact block 2NO+2NC ( Legrand) CTX mini
50
42500
-
Add on contact block 2NO+2NC ( ABB)
30
22500
-
Add on contact block LADN11 ( Schneider)
7
5950
-
Following DIGITAL meters compatible with existing system
-
-
-
AMMETER, 96 Sq.mm CTR-/5A, WITH INBUILT SELECTOR , DM3110; 0-150A ; SCHNEIDER make
3
7536
-
AMMETER, 96 Sq.mm CTR-/5A, WITH INBUILT SELECTOR , DM1110; 0-20A ; SCHNEIDER make
6
6738
-
MFM, MULTIFUNCTION METER CTR- /5A,CL-1 WITH COMM. PORT RS-485 NOMINAL VOLTAGE : 415V AC AUXILIARY VOLTAGE :230V AC HAVING FOLLOWING PARAMETER V,A,F,PF,POWER,KWH WITH TOD etc;Digital; PM5310; SCHNEIDER make of following ratings
-
-
-
600/5a, CL-1
5
136280
-
250/5A, CL-1
5
112500
-
400/5A, CL-1
5
136280
-
150/5A, CL-1
5
92500
-
Ammeter; CTR 5A,230V AC AUX SUPPLY; 96*96 SQMM WITH INBUILT SELECTOR SWITCH,CL-1; ducati make
50
50000
-
A.C operated , 3.5 digit, independent, Digital Voltmeter similar to SMP-45 models of MECO or equivalent
25
13100
-
Multi Function Meter WITH in built SS, 415V AC AUX SUPPLY 96SQMM RS 485 PORT CL 1 for measuring Amps, Voltage, Energy, KWH, KVAH, frequency, Maximum demand & power factor etc with TOD facility conforming to specifications, latest IEC/EMC and EMI standard criterion ; CTR-/5A (DUCATI make)
10
36500
-
0-30A DC DIGITAL DC AMMETER 96 MMSQ WITH SHUNT 75 mV CONZERV make
3
7680
-
0-30V DC DIGITAL DC VOLTMETER 96 MMSQ CONZERV make
3
7680
-
MFM,MFM 3PH,4WIRE,5A WITH RS 485 PORT 92MM*92MM,AUX SUPPLY230V AC; 415V AC CTR-400/5A; type EM6400 DIGITAL CONZERV make
3
1500
-
AMMETER; 0-10A; Model 96*96; AE make
5
2250
-
VOLTMETER; 0-500VAC; Model 96*96; AE make
5
2250
-
Following ratings of MCCBs of ABB make WITH MICROPROCESSOR BASED RELEASE HAVING O/C & S/C PROTECTION+ DOM
-
-
-
400A. 35 kA; Type FP(T5N 400 F F_R400)(PR221 DS-LS/I)
1
54129
-
250A,35kA,4-POLE ; Type FP(T4N 250FF_R250)(PR221 DS-LS/I)
1
45586
-
200A,35KA; Type FP(T4N 250 F F_R250) (PR221 DS-LS/I)
1
45586
-
160A, 35kA; Type FP(T4N 160 F F_R160) (PR221 DS-LS/I)
1
45586
-
160A,35kA; Type TP(T2N160 F F_R160)(PR221 DS-1)
1
24099
-
160 A; TMAX; T2N160
1
33642
-
125A,35KA; type FP(T4N 160 F F_R160) (PR221 DS-LS/I)
1
33642
-
125A,35KA; type TP(T2N 160 F F_R160)(PR221 DS-LS/)
1
24099
-
100A,35KA; Type FP(T4N 160 F F_R100) (PR221 DS-LS/I)
1
45586
-
100A,35KA; Type TP(T2N 160 F F R100) (PR221 DS-LS/I)
1
20319
-
63A, 35KA; Type TP(T2N 160 F F R63) (PR221 DS-LS/I)
3
60958
-
40A,TP,25KA; Type TP(T2N160 F F_R160)(PR221 DS-1)
3
60958
-
MCCB L&T; 400A FP50KA & 250A FP 36KA; Type DN3-400N
1
45450
-
MCCB L&T; 400A FP50KA & 250A FP 36KA; Type DN2-250D
1
50860
-
ABB make soft starter ; Rating PSE105-600-70; 105A, 55 Kw
1
35680
-
Following rating of contactors compatible with existing system
-
-
-
Main contactor 2NO+2NC ,230V ac (legrand), CTX22(18A) 230V
50
62500
-
Contactor ; MNX9+MNX-A2; 9A,240VAC, L&T
2
1910
-
Following rating of contactors of ABB make compatible with existing system
-
-
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 2NO+2NC AUXILIARY CONTACT BLOCK, AC-1 DUTY , FP(AF265-40-00),ABB, 400A
4
236936
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 2NO+2NC AUXILIARY CONTACT BLOCK, AC-1 DUTY , FP(AF190-40-00); 230V AC, 250A
9
374976
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 2NO+2NC AUXILIARY CONTACT BLOCK, AC-1 DUTY , FP(AF116-40-00), ABB, 160A
3
81543
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 2NO+2NC AUXILIARY CONTACT BLOCK, AC-3 DUTY , TP(AX80-30-11), ABB, 75A
25
306425
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 1 NO AUX. CONTACT, AC3 DUTY, 63A, TPN
10
95550
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 2NO+2NC AUXILIARY CONTACT BLOCK, AC-3 DUTY , TP(AX40-30-10), ABB, 40A
7
42973
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 2NO+2NC AUXILIARY CONTACT BLOCK, AC-3 DUTY , TP(AX32-30-10), ABB, 30A
18
75978
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 2NO+2NC AUXILIARY CONTACT BLOCK, AC-3 DUTY , TP(AX09-30-10), ABB, 9A
12
20916
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 1 NO AUX. CONTACT, AC3 DUTY,32A, TP CONTACTOR; AX32-30-10
10
34090
-
POWER CONTACTOR COIL VOLTAGE 230V AC WITH 1 NO AUX. CONTACT, AC3 DUTY,25A, TP CONTACTOR; AX25-30-10
15
23940
-
Following rating of Auxiliary contactors of ABB make compatible with existing system
-
-
-
240 V AC, 2NO+2NC; N22E
14
11340
-
240 V AC, 4NO+4NC
2
2780
-
240 V AC, 8 NO
1
1390
-
Following rating of contactors of Schneider make compatible with existing system
-
-
-
TP POWER CONTACTOR AC1 DUTY-230V AC, LC1F150;250A TP,2NO+2NC
4
137760
-
TP POWER CONTACTOR AC3 DUTY-230V AC, LC1D115; 115A TP,2NO+2NC
2
61780
-
4P POWER CONTACTOR AC1 DUTY WITH 230V AC, LC1D1150046, LC1D; 250A,4P,2NO+2NC
1
34440
-
POWER CONTACTOR ,AUX CONTACT BLOCK AC-3 DUTY, TP(2NO+2NC), LC1D80; 80A ,230V
10
235850
-
POWER CONTACTOR ,AUX CONTACT BLOCK AC-3 DUTY, LC1D26; 25A,2NO+2NC,230V
3
8790
-
POWER CONTACTOR ,AUX CONTACT BLOCK AC-3 DUTY, TP, LC1D09; 9A,2NO+2NC,230V
4
5800
-
POWER CONTACTOR ,AUX CONTACT BLOCK AC1 DUTY, LC1E250; 250A,TP,CONT
1
55765
-
4P POWER CONTACTOR AC1 DUTY,230V AC, LC1D1150046; 160A,4P,2NO+2NC
2
64730
-
CONTACTOR, LC1D25; 1PH,3PH, 25A,50/60Hz
10
61000
-
CONTACTOR, LC1D40; 1PH,3PH,40A,50/60Hz
10
86000
-
LC1D12M7 - 12A TP contactor
7
14280
-
Aux Contactor, 2NO+2NC; 240V AC
2
7510
-
Aux contactor 3NO+1NC ,230V ac (schneider) ;use for control circuit max current 10amp
20
69000
-
CONTACTOR 240A AC1,AUX 2NO+2NC; type MCX-33; make L&T; 400A FP
3
73635
-
Following cast resin type of CTs with 15 VA Burden and Class 1.0 for measurement; AE make
-
-
-
4000/5
1
2780
-
2500/5
1
1400
-
1600/5
1
1125
-
1000/5
1
545
-
800/5
1
665
-
600/5
1
550
-
400/5
1
550
-
200/5
1
520
-
160/5
1
495
-
125/5
2
990
-
100/5
1
495
-
250/5
1
580
-
63/5
1
250
-
40/5
1
250
-
32/5
1
250
-
Following cast resin type of CTs with 15 VA Burden and CL-5P10 for protection; AE make
-
-
-
4000/5
1
2780
-
2500/5
1
1400
-
1600/5
1
1125
-
1000/5
1
545
-
800/5
1
665
-
600/5
1
550
-
400/5
1
530
-
200/5
1
520
-
160/5
1
495
-
125/5
1
495
-
100/5
1
495
-
250/5
1
580
-
63/5
1
250
-
40/5
1
250
-
32/5
1
250
-
Start Stop push buttons along with all accessories. Make L&T- ESBEE
100
85000
-
ILLUMINATED PUSH BUTTON (22.5mm Dia) Green; 230V AC,1NO; Dia 22.5mm; L&T-ESBEE
25
96000
-
ILLUMINATED PUSH BUTTON (22.5mm Dia) Red; 230V AC,1NC; Dia 22.5mm; L&T-ESBEE
25
96000
-
Lockable push buttons dia 22.5 mm, 240V ac along with all accessories. Make VAISHNO/L&T-ESBEE
10
26600
-
Following items of reputed make
-
-
-
5-32A FP MCB, 10 Ka, "C" curve
60
31080
-
40-63A FP MCB 10 kA
60
146580
-
32-40 Amps, TPN, MCB (10 KA)
60
146580
-
63 Amps, TPN, MCB (10 KA)
150
366450
-
5-32A TP MCB , 10 Ka, "C" curve
60
74340
-
40-63A TP MCB 10 kA
60
113400
-
5-32A DP MCB , 10 Ka, "C" curve
60
45360
-
40-63A DP MCB 10 kA
60
72240
-
5-32A SP MCB , 10 Ka, "C" curve
200
51800
-
40-63A SP MCB 10 kA
60
31080
-
16-32Amp DP RCCB, 30 mA
250
796250
-
40-63Amp DP RCCB, 30 mA
10
31850
-
16-32Amp DP RCCB, 100 mA
250
728000
-
40-63Amp DP RCCB, 100 mA
10
33320
-
16-32Amp DP RCCB, 300 mA
10
29260
-
16-32Amp DP RCBO, 30 mA
250
1093750
-
40-63Amp DP RCBO, 30 mA
10
51940
-
16-32Amp DP RCBO, 100 mA
250
1172500
-
40-63Amp DP RCBO, 100 mA
10
54360
-
16-32Amp DP RCBO, 300 mA
10
45360
-
40-63 Amp, 4 pole RCCB, 30mA
11
46970
-
Astronomical digital timer switch ( Make L&T) for installation in DBs for automatic switching On & Off of lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. (GIC Astro Mini Astronomical Time Switch, T2DDT7)1 output per phase and suitable for single phase supply
100
325000
-
Door limit switch conforming to IP66 as per IEC60S29. Contact blocks shall be of NO+NC. Limit switch shall be of plunger/ spring type with linear movement. (Kaycee make KLS000X- OA)
30
75000
-
Door switch 6A, 1NO+1NC; SALZER& L&T
10
4500
-
CONDUIT WIRING and cables
-
-
-
GI conduiting complete with GI junction and pull boxes, GI fish wires as specified and as shown below.
-
-
-
25 mm dia 1.6mm thick
3000
660000
-
32 mm dia 1.6mm thick
10
4500
-
50 mm dia 2.0mm thick
10
7500
-
FRLS PVC insulated copper conductor single core cable of following sizes
-
-
-
1.5 sq mm
700
12600
-
2.5 sq mm
2500
70000
-
4 sq mm
2500
110000
-
6 sq mm
400
22400
-
10 sq mm
700
49000
-
16 sq mm
200
22000
-
1100 V grade, armoured FRLSH XLPE, Aluminium(Al)/ cables on existing trays/ walls/ columns/indoor /trenches/viaduct including the cost of supports with suitable clamps, saddles, hooks, bolts etc. and including the cost of proper dressing of cables, markers providing identification tags, earthing of glands armouring etc. complete as per specifications, as required and as below.
-
-
-
3.5 core 120 Sq mm Al conductor cable
500
378000
-
3.5 core 70 Sq mm Al conductor cable
250
155000
-
3.5 core 35 sq mm AL Conductor cable
100
53000
-
4 core 25 sq mm AL Conductor cable
2000
912000
-
4 core 16 sq mm AL Conductor cable
3000
1116000
-
4 core 10 sq mm AL Conductor cable
1000
311000
-
4 core 6 sq mm AL conductor cable
1000
258000
-
4 core 4 sq mm AL conductor cable
1000
202000
-
3 core 2.5 sq mm AL conductor cable
1000
350000
-
3 core 2.5 sqmm copper cable
2000
460000
-
Fans
-
-
-
Exhaust fan with fan guards on both sides, double ball bearings, class-E insulation, capacitor (pf 0.90 or better) complete with all other accessories as per IS 2312 and as required, of following sizes:
-
-
-
Size 300 mm dia, 1400 rpm
100
250000
-
Size 450 mm dia, 1400 rpm
60
168000
-
Size 225 mm dia
50
90000
-
230V 1 phase 1440 RPM, sweep 400mm approx bracket fan including mounting bracket, blades, starters & other standard accessories complete as required.
20
45000
-
Pedestal fans of 400mm sweep ( Crompton or Bajaj or Orient make )
30
64500
-
Ceiling fan 1400 mm , 1200mm sweep of 5 star rating suitable for operation on 230V ac
100
225000
-
Wires and sockets
-
-
-
Following modular grid plate mounted switch/ (es) and socket/(s) etc.
-
-
-
6A modular switches.
200
15344
-
6 Amp Universal socket with 6 amp modular switch.
400
80864
-
6/16 Amps, Universal socket with 16 Amps, modular switch.
400
151760
-
20/25/32A 1-Phase industrial socket outlet with 20/25/32A SP, DP MCB in a GI enclosure with IP56 protection rating with all mounting & fixing accessories & terminations with separately lockable facility complete as required.
20
35000
-
Industrial type reputed make extension boards of 6,16A rating ( Bajaj etc)
100
161000
-
Modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
924
-
Following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required
-
-
-
3 Module (100mmX75mm)
250
22400
-
4 Module (125mmX75mm)
66
7484
-
6 Module (200mmX75mm)
150
27930
-
8 Module (125mmX125mm)
10
2590
-
12 Module (200mmX150mm)
10
2828
-
HIGH MAST LIGHTING
-
-
-
30 m High Mast System
-
-
-
Mini Flood Lights 200W, Philips make (LED lights)
8
208000
-
Following miscellaneous items
-
-
-
Industrial salt ( Non iodised and powdered form)
2000
24000
-
Distilled Water
2500
12500
-
Door lock for panels and DBs along with key compatible with the existing panels and DBs (Round, square, triangular type)
150
10500
-
Anchor fastener 12mm
100
1000
-
Aux. Contact 1 NO + 1NC for MCB
50
17500
-
Gear Oil - SAE 140/90
10
1500
-
High load extreme pressure bearing Grease (SKF bearing grease -LGEP 2/5)
30
4500
-
Hooter (AMF Panel)
10
12000
-
Isolation transformer cooling fan:220V A.C, 50/60HZ, 0.14A axial fan ( make KLILX model 120x120x38 etc )
60
53400
-
Occupancy sensor of make Hager EE811; 230v, 50 Hz, IP41
20
130000
-
Capacitor (3.15 MFD) for Ceiling fans
50
1000
-
Winch -Crescent make 750 Kg Double Drum suitable for 30 m high mast
2
15000
-
Cable Tie of size 300,250,150mm
3000
9000
-
Emergency torch
10
1500
-
Selector switch
-
-
-
SELECTOR SWITCH A/M/T,2POLE 3WAY WITH OFF; 6A ; SALZER(L&T); ROTARY type
3
1050
-
SELECTOR SWITCH L/R,LOCAL REMOTE SS WITH 2 POLE 2 WAY WITH OFF; 6A ; SALZER(L&T); ROTARY type
3
1050
-
SELECTOR SWITCH 1, DC ON/OFF SS 2 POLE 2 WAY WITH OFF; 16A ; SALZER(L&T); ROTARY type
3
1500
-
A/L/R SELECTOR SWITCH 3NO; 6A; L&T
10
5000
-
A/L/R SELECTOR SWITCH ,4P 2W WITHOUT OFF; type CAM ; 6A; make SALZER/L&T
20
5000
-
AUTO/MANNUAL SELECTOR SWITCH; 6A; 3 NO; L&T
14
3500
-
AUTO/MANNUAL SELECTOR SWITCH; 6A; 4 NO; L&T
14
3500
-
AUTO/MAN. SELECTOR SWITCH 3P, 3W WITH OFF; 16A,DP SW; CAM type; SALZER& L&T
17
8500
-
A/L/R SELECTOR SWITCH ,4P 3W WITHOUT OFF; type CAM ; 6A; make SALZER/L&T
5
1250
-
EMERGENCY PUSH BUTTON- VAISHNO/L&T-ESBEE; Dia 22.5mm
7
560
-
Breaker Control Switch (T-N-C Switch) with key(spring return); 2NO; (Make L&T)
15
60000
-
Auto/Manual Selector Switch 6A, 2 pole 3 way (make L&T)
15
3750
-
On Delay Timer , 230V AC 2C/O (make GIC)
15
21600
-
On Delay Timer , 230V AC 1C/O (make GIC/L&T)
15
21600
-
Star Delta timer 3-120sec , 230V ac ( GIC make)
7
10080
-
Base mounted Voltage Monitoring Relay 3 phase, 4W, 415V AC, Auxiliary contact 2C/O (make L&T/GIC)
10
22600
-
Facp battery,CR2032,3V,micro lithium cell
20
3000
-
Single phase preventer type KS002, 415 V KGN make(sump pump)
15
18750
-
Single phase preventer- 415V AC, 230V AC AUX; cast resin; minilec
10
12500
-
Line Tester,Taparia 813
25
500
-
Connector,Make- FTC, 35-50 mm^2, 1000V
200
30000
-
THERMOSTAT 230V,AC 30-70 CENT.; ANCO make
200
130000
-
AXIAL FLOW FAN 4 INCH,230V,AC; 1P; AVR
25
19500
-
GLASS FUSE WITH 230V AC FUSE BLOW INDICATOR 200mA; CONNECTWELL
25
250
-
Water Tank sensors ; steel molded with polypropylene contact type
150
9000
-
1 CHANGEOVER CONTACT OPEN-CLOSED + 1 CHANGEOVER FOR TRIPPED INDICATION T1-T2-T3-T4-T5-T6 (Product ID:1SDA051368R1) Used in MCCB,ABB
21
26250
-
MOTOR MECHANISM 230V AC of MCCB Schneider, NSX-400F MICROLOGICS 2, 400A,FP,35KA
2
121708
-
Terminal Block of following sizes
-
-
-
2.5 -4 sq mm
400
1600
-
16 sq mm
250
4500
-
25 sq mm
250
6500
-
35-50 sq mm
250
7500
-
High mast connector 63A; IP 44
3
16500
-
Level Indicator Cum Controller of following types
-
-
-
CLA3-lic; Cirrus; ISO 9001:2008
4
30000
-
ANERGY Model No. P-16-2-3, 24Vac 300mA
2
9000
-
Following Motorised valves
-
-
-
belimo motorised valve LR24A-S AC/DC 24V
3
75900
-
belimo motorised valve Model no. SY1-230-3-T 230 V
3
55500
-
Flow switch for water flow status ; MODEL WFD60 system sensor make; minimum flow rate for alarm 4-10 gpm
2
15000
-
LED drivers for station name signages of following makes :
-
-
-
MAke- Neenjas
Model :CV-200ADRP
I/P 150-300V
Effieciency-89%
P in-200W
Iin- 1.2A
voltage -12VDC
Iout-16A
Protection over voltage, short circuit
20
80000
-
Make- sign tek model-ST-WP12300
INPUT AC170-260V, 3.5-25A, 50Hz
OUPUT DC-12V/25A 300W MAX
IP67, TEMP 50C-75C
20
80000
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements