New Okhla Industrial Development Authority Tender

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. The Contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in-Charge.

S/F of M.S. specials such as Tee, Bend, Collars, Tapers, Gap Pieces, including flage ends as required, painting, cutting, welding as per site requirement of MS pipe thickness etc. complete in all respect as per direction of E/I.

P/L following size of Finolex Makes PVC pipes 6 Kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same treches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to length and making joints i/c cost of socket, plstochem PV-85 PVC solvent cement complete. PVC Pipe must be confirmed IS : 4985-2000 with latest amendment. Make- Finolex Industries Ltd./Kisan/Supereme Industries Ltd (Rate as per Comparative Statement per Rm.) 200 mm dia with coupler @ 6 Kgf/Cm2 Pressure with i/c all PVC Standard Specials.

Hire Charge of Generator (Including cost Service of operating staff, supply of lubricating oil and diesel also) D.G. Set/Generator 63 KVA.

Hiring of Gas Cutting Set with Oxygen and LPG Running Time @ 6 Hrs.

Hiring of Welding Set Running Time @ 6 Hrs.

Hiring of Diesel Engine (Including cost of Diesel, lubricant & Operator).

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

P/F Sluice Valve Shall generally conform to IS 14846 with latest amendment, with length over flanges as per PD of IS 14846 corrensponding to BS EN-558/ ISO 5752 Basic Series 3 in CI Construciton having metal seating (IS 318 Gr. LTB 2). with complete Component & Material of construction following below:- 1. Body/Door/Dome -Cast Iron IS 210 Gr. FG 260 2. Spindle- Non rising ; Stainless Steel AISI 410 3. Body Seat/Door Face - Gun Metal : IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed) 4. Rivets - Soft annealed brass 5. Spindle Nut - Gun Metal : IS 318 Gr. LTB 2 6. Stem Seal - Greased Hemp 7. Fasteners - Carbon Steel 8. Flange Drilling - IS 1538 Table 4 & 6 9. PN 1.0 10. Accessories (400 mm and above) - Ball thrust bearing to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug 11. Painting/Coating - Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) 12. Hydro-test - (Open Ended Only) Seat: 10/16 Kg/cm²; Body 15/24 Kg/cm² 13. Upto 600 mm dia Manual Operated & above 600 mm Gear Box Make-Indian Valve Pvt. Ltd. (IVC)/Kirloskar Brothers Limited (KIRLOSKAR) 200 mm dia

P/L Non-Pressure NP-3 Class RCC Spigot Socketed pipe confirming to IS:458:2003 with latest amendment laying in true alignment & position on craddle including with rubber ring (confirming to IS:5382 with latest amendment) testing of laid pipe ad per direciton of Enginner incharge complete in all respect. 450 mm dia

Centering and shuttering including strutting, propping etc. and removal of form for: a) Foundations, footings, bases of columns, etc. for mass concrete.

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4coarse sand) inside cement plaster 12 mm thick with cement mortar1:3 (1 cement : 3 coarse sand) finished with a floating coat of neatcement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessarychannel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 10.00.

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With common burnt clay F.P.S. (non modular) bricks of class designation 10.00.

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 10.0 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand).

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as perdirection of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.