New Okhla Industrial Development Authority Tender

Supply & Fixing of T-250 Turbo Charger (T-250/50.2/0.51-62.1) Complete in all respect as per direction of E/I.

Refilling Mobil Oil.Complete in all respect as per direction of E/I.

Refilling of Coolant. Complete in all respect as per direction of E/I.

Supply and Fixing. Battery Charger Unit. Complete in all respect as per direction of E/I.

Supply & Fixing of Starter (12V). Complete in all respect as per direction of E/I.

Exhaust Silencer for 82.5 KVA Set Complete in all respect as per direction of E/I.

Air Cleaner Assembly with Pre Cleaner. Complete in all respect as per direction of E/I.

Refilling Oil Filter. Complete in all respect as per direction of E/I.

Supply & Fixing of Fan for brush type Kg ALT(0.14H) Complete in all respect as per direction of E/I.

Supply & Fixing of Thermostat Housing Assly(4D,440 CRS Water)Complete in all respect as per direction of E/I.

Repairing of Self Starter. Complete in all respect as per direction of E/I.

AVR S/F Variable Speed DCDG. Complete in all respect as per direction of E/I.

Supply & Fixing of Lub Oil Pipe. Complete in all respect as per direction of E/I.

Rubber Packing for Stra. Complete in all respect as per direction of E/I.

Supply & Fixing Terminal Box (KG Part No 16A118) for KG Alternator Frame KG 164 E to J & kG184A&B. Complete in all respect as per direction of E/I.

Supply & Fixing Hour Meter 240 V, 50 HZ, Single Phase, Range 9999.9 Type-TT5/H, Kaycee Make. Complete in all respect as per direction of E/I.

Supply & Fixing Gear Drive, Injection Pump. Complete in all respect as per direction of E/I.

Supply & Fixing of Battery 12 V PM 20000 Prestolite make .Complete in all respect as per direction of E/I.

Supply & Fixing Aluminium Radiator Assembly for 2R1040 CPCB Engine. Complete in all respect as per direction of E/I.

Supply of D.G. Operatior 01 Nos. (All staff verified by deptt.)

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. DSR Electricals 2018 No. 9.3 a) 2 X 25 sq. mm (9.3.2)

c) 4 X 16 sq. mm (9.3.29)

Location and pin pointing of LT Cable fault exposing the same in the underground LT Cables including digging of trench upto the depth of the cable, cutting the faulty cable and sealing of the faulty cable and sealing of the faulty cable, by providing fault locator machines with operator (Cable fault locator) (AOR)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. i) 90 mm dia (OD-90 mm & ID-76 mm nominal) DSR Electrical-18 pg-52, I.No.14.16.2

63 mm dia (OD-63 mm & ID-50 mm nominal) DSR Electrical-18 pg-52, I.No.14.16.1

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR Electrical 2018/ I.No. 12.34

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS No. 501 a) 25 sqmm x 3.5 core

b) 50 sqmm x 3.5 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making onnection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504 a) 25 sqmm

d) 50 sqmm

fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52Watt. to 72 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA PS 1420

Supply and fixing of XLPE insulated Al. unarmoured cable for working voltage for energizing the distribution boxes & street light size 1x25sqmm complete in all respects as per direction of E/I. (AOR)

Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.PS NO 1116

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR Electrical 2018/ I.No. 1.45 P-8

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect complete in all respects. P.S.No. 1413 CAT AAA

Wiring points for light with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit) with 1.5 sqmm PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit and 5 amp flush type switch & ceiling rose/angle/batten holder fixed on 3mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS switch board box/junction box with supply of all material, labour and T&P etc. required for proper completion of the work as directed at site by the Engineer I/C PS No. 174 (C)

Wiring points for ceiling fan (light duty exhaust fan) with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit) with 1.5 sqmm PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit and 5 amp flush type switch & ceiling rose/angle/batten holder fixed on 3mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS switch board box/junction box with supply of all material, labour and T&P etc. required for proper completion of the work as directed at site by the Engineer I/C PS No. 177 (C)

Wiring points for Plug point with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit) with 1.5 sqmm PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit and 5 amp flush type switch & ceiling rose/angle/batten holder fixed on 3mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS switch board box/junction box with supply of all material, labour and T&P etc. required for proper completion of the work as directed at site by the Engineer I/C PS No. 178 (C)

Wiring point for exhaust fan with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in 2mm thick PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit,15 A piano type switch & ceiling rose on 3mm thick phenolic laminated backelite sheet etc. complete in all respects including matching colour wash.(Heavy duty Ex. Fan) PS No. 144 (C)

Supply and fixing of power plug with 15A/250 V flush type switch and 5 pin 15A/250V flush type flush universal socket in suitable MS box of 175mm x 100mm x 50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. PS No. 1139

Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. PS 291

Supply and wiring of submains with 2 nos. 4 sq mm and 1 no 2.5 sq mm FRLSH PVC insulated copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. PS 291(A)

Supply and wiring of submains with 2 nos. 6 sq mm and 1 no 4 sq mm FRLSH PVC insulated copper conductor cable. in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. PS 291(D)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument &instrument box with CTs etc. in case of TPN, complete in all respect. PS No. 807 e (ii) 25 A TPN

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting,M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.Incoming: 100 Amp MCCB -1 No, Outgoing: 63 Amp MCCB -2 No. Cat. B. Pannel Cubicle Type PS No. 811 a-ii