New Okhla Industrial Development Authority Tender

Supply of PVC Pipe 6 kg/Cm2 Pressure with required PVC standered special confirming toi IS:4985-2000 with latest amendmant Make-Finolax industries Ltd,/Kisan/ Supreme industries Ltd (Rate per Comparative Statement per Rm.) 4.01) 90 mm Dia

110 mm dia

140 mm dia

160 mm dia

200 mm dia

Repairing of Existing PVC water line including bailing out of water by/ manually/Diesel Engine,P/F PVC coupler,CID joint etc.complete work as per direction of E/I (But Excluding cost of Excavation, filling and PVC pipe) 5.01) 90 mm Dia

110 mm dia

140 mm dia

160 mm dia

200 mm dia

P/F M.S. specials such as tee, bends, collars, pipe tail piece etc. in required thick of MS sheet complete in all respect as per direction by the E/I. NSI

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundaions etc. in layers not exceeding 20 cm in depth: consolidating earth deposited layer by ramming and watering, lead up to 50m and lift upto 1.50 m.

Providing and fixing Sluice valve shall generally confirm to IS 14846 with latest amendment, with length over flanges as per PD of IS 14846 corrosponding to BS EN-558/ ISO 5752 Basic series 3 in CI construction having metal seating ( IS 318 Gr.LTB 2). with complete compone 1- Body / Door/ Dome-cast iron IS 210 Gr. FG 260 2- Sipindle- Non rising, Stainless Steel AISI 410 3- Body seat/ Door face - Gun metal; IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed) 4-Rivets - soft annealed brass 5 - Spindle Nut - Gun metal ; IS 318 Gr. LTB 2 6 - Stem seal - Greased Hemp 7- Fasteners - Carbon steel 8 - Flange Drilling - IS 1538 Table 4 & 6 (9) PN 1.0 10-Accessories (400 mm and above) - Ball thrust bearing to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear box for ease of operation , Air Plug 11-Painting/ Coating- inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE) 12- Hydro- test-( Open Ended only ) Seat; 10/16 Kg/cm2; Body15/24 Kg/cm2 13-Upto 600 mm dia Manual Operarted & above 600 mm Gear box Make-Indian Valve Pvt. (IVC)/ Kirloskar / Brothers Limited (KIRLOSKAR)

200 mm dia

P/F Reflex Valve upto 600 mm dia shall confirm to IS 5312 Part 1 & above to IS 5312 Part -2 with latest amendment, Valves shall be in graded CI with metal to metal ( IS 318 Gr. LTB 2) seating, preferably slanted ( and not perpendicular) vis- a-vis horizontal axis, SS AISI 410 stub pins & slant seat disign. with complete component & Material of construction following below; 1- Body / Door/ Dome-cast iron IS 210 Gr. FG 260 2- Hinge pin (single door / Stub pin ( multidoor type) SS AISI 410 3- seat/ face rings - Gun metal; IS 318 Gr. LTB 2 4-Rivets - soft annealed brass 5 - Fasteners - Carbon steel 6 - Flange Drilling - IS 1538 Table 4 (7) PN 1.0 8-By pass arragement- optional 9 -Painting/ Coating- inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE) 10- Hydro- test Seat; 10/16 Kg/cm2; Body15/24 Kg/cm2 Make-Indian Valve Pvt. (IVC)/ Kirloskar / Brothers Limited (KIRLOSKAR) 11.01) 150 mm Dia

200 mm dia

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 10.00 .

Hiring of Gas cutting Set with Oxygen and LPG running time @ 6 Hrs

Hiring of welding Set running time @ 6 Hrs

Hire Charges of 50 KVA D.G. Set(Including cost Service of operating staff,supply of lubricating oil and diesel also)

Hiring of Diesel Engine ( including cost of Diesel, lubricant & Operator)