New Okhla Industrial Development Authority Tender

Providing and supplying a visitor chair with ergonomic design for user comfort & shall have aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1mm thick, 535 GSM and breathable mesh tapestry behind the backrest. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. Chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(W) X 510±10 mm(D) and back size shall be 450±10 mm(W) X 540±10 mm(H) from seat & overall height = 980±10 mm, overall width = 560±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying ergonomic design MID back chair. The seat shall be made of 12mm thick hot pressed  plywood upholstered with high resilience polyurethane foam 50mm thick having density 50kg/m³ with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of metal pipe frame upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with Fixed cushion lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be polyurethane arm mounted on chrome pipe completely joint with seat. For seating durability the chair shall have swivel tilt revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should be five legged chrome plated having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 475±10 mm(W) X 485±10 mm(D) and back size shall be 485±10 mm(W) X 565±10 mm(H) from seat & overall height = 1015±10 mm. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing mid back chair. The seat shall be made of 15mm thick hot pressed plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg/m³ with leatherite tapestry with 0.8mm thick and 535 GSM and the back shall be made of MS pipe frame upholstered with high resilience polyurethane foam 12mm thick having density 23kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine for lumbar support. The seat and back shall be arrested together with powder coated HR steel spine and the armrest shall be used cushion arm mounted on completely joint with seat and back. The frame structure shall be cantilever support type made up of MS CRCA chrome plated round pipe of Dia 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 490±10 mm(W) X 490±10 mm(D) and back size shall be 555±10 mm(H) from seat. Overall height = 1010±10 mm and overall width/ depth = 760±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing ergonomically designed, comfortable & aesthetically appealing High Back Chair. The seat shall be made of 15mm thick hot pressed curved plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM and the back shall be supported by metal insert MS CRCA frame upholstered with high resilience polyurethane foam 12mm thick having density 23kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. Headrest shall be provided for comfort of head with leatherite tapestry. The armrest shall be used MS CRCA chrome plated with PU arm completely joint with seat and back. The chair shall have knee tilt 360 degree revolving mechanism with four position locking and tilt tension adjustment. The hydraulic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 485±10 mm(W)X520±10 mm(D) and back size shall be 740±10 mm(H) from seat & overall height = 1150±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

CLIFF CENTER TABLE 1200X 600 MM- Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top of the table shall be made up of 12mm thick toughened glass with bevelled edges. The profile shall be in rectangle shape with round corner. The top shall be supported on MS chrome plated tubular frame with cross-section area 40mm X 20mm with 1.6mm thick. The under structure shall consist of four legs made of MS chrome plated oval pipe having cross-section area 52mm X 26mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing Visitor / Lounge Chair. The seat & Back shall be made of 12 mm thick hot pressed plywood upholstered with high resiliance polyurethane foam 50mm thick having density 40kg/m³ with leatheratte tapestry and the back shall be made of 12 mm thick hot pressed plywood upholstered with high resiliance polyurethane foam 30mm thick having density 30kg/m³ with leatheratte tapestry. The Frame structure shall be 4 legs support type made up of Wooden Frame ( teak Wood ) & to be extended to Form the Armrest . The back shall be fixed with Wooden frame. Wooden Armrest. There shall be plastic shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm (W) X 500±10 mm (D) and back size shall be 450±10 mm (W) X 390±10 mm (Ht) from seat & Back Ht only 400mm. Overall height shall be = 830±10 mm, overall depth = 590±10 mm & overall width = 590±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying high back chair with ergonomic design. The seat and back shall be made up of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat and (30+25)mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine with lumbar support which helps to provide full back support as well as head support. The chair shall be supplied with aluminium arm with cushion top and leatherite upholstery. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged MS CRCA chrome plated having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 480±10 mm(D) X 550±10 mm(W) and back size shall be 530±10 mm(W) X 700±10 mm(H) from seat. Overall height shall be = 1110±10 mm, overall depth = 660±10 mm & overall width = 645±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm. The top shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. . The understructure shall consist of MS/CRCA 0.8mm thick Sheet profile.Bottom Frame is made up of CRCA. I - Legs are made up of 0.8mm CRCA Sheet. Fixed top supporting pedestal shall be supplied at one side of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. It should have 2 nos. of drawer i.e. 1 box and 1 filing. It should be operated on ball bearing sliding channel and recessed plastic handle with centralized locking mechanism. The table shall be clad with modesty panel Made up of CRCA 0.8mm thick duly powder coated.There shall be leveller provided at the bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have MS Gold Leg. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat height = 430±10 mm, overall width = 1010±10 mm, overall depth = 860±10 mm & overall height = 870±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying a Mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (30+25)mm thick having density (40 & 32)kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam 30mm thick having density 32kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick and 535 GSM.. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support .The chair shall be supplied with Wooden cushion arm with leatherite covering top completely joint with seat and back. For seating durability the chair shall have, Torsion Bar 360 degree revolving mechanism having Upright locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 80mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of Aluminium Diecast Base having pitch circle dia. 640 mm fitted with 5 nos. twin wheel castors. The castors of the chair shall be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA X5.1-2011 standards tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 480±10 mm(W) and back size shall be 590±10 mm(W) X 600±10 mm(H) from seat. Overall height shall be = 1040±10 mm, overall depth/width = 740±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (30+25)mm thick having density (40 & 32)kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam 30mm thick having density 32kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick and 535 GSM.. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support & full back support as well as head support. The chair shall be supplied with Wooden cushion arm with leatherite covering top completely joint with seat and back. For seating durability the chair shall have, Torsion Bar 360 degree revolving mechanism having Upright locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 80mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of Aluminium Diecast Base having pitch circle dia. 640 mm fitted with 5 nos. twin wheel castors. The castors of the chair shall be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA X5.1-2011 standards tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 480±10 mm(W) and back size shall be 590±10 mm(W) X 790±10 mm(H) from seat. Overall height shall be = 1250±10 mm, overall depth/width = 740±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing Modular table in completely knock down conditions with an overall size 1600mm X 700mm X 750mm that is to be assembled at site. The top shall be made up of 45mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate at top and balancing laminate at bottom finish as per approved shade. Extruded aluminium profile shall be provide below the top all around the worktop having cross-section area 9mm X 25mm. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on pillars mounted over fixed pedestal on both side which shall be made up of Pre-laminated particle board. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 529mm X 300mm. The trey shall be operated on keyboard channel. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board connected with both end. The table shall have fixed storage unit for storage purpose at one side with an overall size 300mm X 600mm X 625mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have one shutter operated by concealed crank hinge and SS handle. On other side fixed pedestal shall be provided with an overall size 400mm X 600mm X 625mm. It should be made up of Pre-laminated particle board of grade II of IS 12823. Side, back, facia shall be 18mm thick, top 25mm and drawer base 9mm thick. The pedestal shall have 3 nos. of drawer have same size operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of MS Gold Leg. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat height = 430±10 mm, overall width = 1900±10 mm, overall depth = 860±10 mm & overall height = 870±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying executive table with an overall size 1500mm X 1600mm X 750mm. The top shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. . The understructure shall consist of MS/CRCA 0.8mm thick Sheet profile.Bottom Frame is made up of CRCA. I - Legs are made up of 0.8mm CRCA Sheet. Fixed top supporting pedestal shall be supplied at one side of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on ball bearing sliding channel and recessed plastic handle with centralized locking mechanism. The table shall be clad with modesty panel Made up of CRCA 0.8mm thick duly powder coated.The side unit Top shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. . The understructure shall consist of MS/CRCA 0.8mm thick Sheet profile.Bottom Frame is made up of CRCA. I - Legs are made up of 0.8mm CRCA Sheet. Fixed top supporting pedestal shall be supplied at one side of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. It should have 2 nos. of drawer It should be operated on ball bearing sliding channel and recessed plastic handle with centralized locking mechanism.There shall be leveller provided at the bottom.The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification for Educational Furniture . Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall consist of pipe frame loop leg of SS shiny chrome finish having cross-section area 40mm X 20mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 1540±10 mm(W), seat height = 435±10 mm, overall width = 1860±10 mm, overall depth = 770±10 mm & overall height = 780±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & placing Corner table an overall size 600mm X 450mm X 450mm. The top & Shelf of the table shall be made up of 18mm thick MDF Board in teak Colour memlamine Polish. The top profile shall be in Rectanguler wooden shape. The under structure shall have teak wood having size 75mm X 30mm Solidwood legs & 50mm X 25mm Frame for Shelf with melamine polish.There shall be shoe provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 12 Seater Linear Non Sharing Workstation @ Overall Size :- 15180LX660DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 10 Seater Linear Non Sharing Workstation @ Overall Size :- 12660LX660DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 8 Seater Linear Non Sharing Workstation @ Overall Size :- 10140LX660DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 6 Seater Linear Non Sharing Workstation @ Overall Size :- 7620LX660DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 5 Seater Linear Non Sharing Workstation @ Overall Size :- 6360LX660DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & placing Corner table an overall size 1200mm X 600mm X 450mm. The top & Shelf of the table shall be made up of 18mm thick MDF Board in teak Colour memlamine Polish. The top profile shall be in Rectanguler wooden shape. The under structure shall have teak wood having size 75mm X 30mm Solidwood legs & 50mm X 25mm Frame for Shelf with melamine polish.There shall be shoe provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

2 SEATETR - Supplying and placing Double seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. Cushion arm shall be supplied with backrest frame and padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The legs shall be 40mm thick round & 150mm height wooden leg with 3mm thick MS gold plating sheet . Overall width = 1500±10 mm, overall depth = 840±10 mm & overall height = 760±10. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying a Mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (30+25)mm thick having density (40 & 32)kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam 30mm thick having density 32kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick and 535 GSM.. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support & full back support as well as head support. The chair shall be supplied with cushion arm with leatherite covering top completely joint with seat and back. For seating durability the chair shall have, Synchro knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of Aluminium having pitch circle dia. 640 mm fitted with 5 nos. twin wheel castors. The castors of the chair shall be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA X5.1-2011 standards tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 480±10 mm(W) and back size shall be 590±10 mm(W) X 600±10 mm(H) from seat. Overall height shall be = 1040±10 mm, overall depth/width = 740±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

W1800 X D1650 X H750 - Supplying & Placing Modular table in completely knock down conditions with an overall size 1800mm X 1650mm X 750mm that is to be assembled at site. The work top shall have the size 1800mm X 750mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top shall be 50mm thick on edges, after 100mm from edges it should be 25mm thick. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 50mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. The table shall have side unit for storage purpose with an overall size 900mm X 450mm X 750mm. Side Storage top shall be made up from 25mm thick prelam particle board. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with 18mm thick like shutter, back, facia, top etc. It shall have 2 shutters. The shutter shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The shutter shall have central locking mechanism in which all the drawer shall be locked with one single lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. Laminate pedestal shall be provided with an overall size 400mm X 450mm X 680mm. Laminate pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (30+25)mm thick having density (40 & 32)kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam 30mm thick having density 32kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick and 535 GSM.. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support & full back support as well as head support. The chair shall be supplied with cushion arm with leatherite covering top completely joint with seat and back. For seating durability the chair shall have, Synchro knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of Aluminium having pitch circle dia. 640 mm fitted with 5 nos. twin wheel castors. The castors of the chair shall be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA X5.1-2011 standards tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 480±10 mm(W) and back size shall be 590±10 mm(W) X 790±10 mm(H) from seat. Overall height shall be = 1250±10 mm, overall depth/width = 740±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 2 Seater Linear Non Sharing Workstation @ Overall Size :- 2580LX660DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying one seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have SS 202 grade with shiny chrome finish frame having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 670±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 1270±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 10 Seater Linear Non Sharing Workstation @ Overall Size :- 12660LX660DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

3 SEATETR - Supplying and placing Three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. Cushion arm shall be supplied with backrest frame and padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The legs shall be 40mm thick round & 150mm height wooden leg with 3mm thick MS gold plating sheet . Overall width = 2155±10 mm, overall depth = 840±10 mm & overall height = 760±10. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing Modular table in completely knock down conditions with an overall size 2450mm X 2200mm X 750mm that is to be assembled at site. The work top shall have the size 2100mm X 1000mm made up of 50mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top shall be 50mm thick on edges, after 100mm from edges it should be 25mm thick. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Extruded Aluminium profile shall be inserted in the side edges of the table on both side. The table top shall be supported on MS powder coated pipe frame having cross-section area 50mm X 25mm with 1.6mm thick. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 50mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. The table shall have side unit for storage purpose with an overall size 2200mm X 600mm X 641mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, top etc. It shall have 3 drawer, 1 shutter and 2 sliding shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of SS 304 grade leg with shiny chrome finish having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 2000±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 2600±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 2 Seater Linear Sharing Workstation @ Overall Size :- 1320LX1260DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification, IDM certification, green gaurd by UL Certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & installing of table with ERU and pedestal having following specifications. The table shall be supplied in completely knock down conditions with an overall size 2400mm X 2100mm X 750mm that is to be assembled at site. The worktop shall have the size 2200mm X 940mm made up of 50mm thick Medium Density Fibre-board with approved laminate and finish as per approved shade. The top edge should cladded with 1.2mm thick extruded aluminium section all around the worktop and die cast end caps on joints for better strength of the table. The profile shall be in rectangle shape and enclosed by single sided flapper box that houses telephone cable, data and power connection discretely. The top shall be supported on gable end at one side and round peg mounted on ERU unit at another side. The end wall of the table on the side shall be topped by gable end. It should be 50mm thick Medium Density Fibre-board linear in profile and the edges cladd with extruded aluminium profile. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick particle board and shall be linear in profile with round corners and the edges shall be sealed with 0.8mm thick PVC edge banding. The table shall be supplied with credenza unit with an overall size 1980mm X 400mm X 635mm that shall be constructed from Pre-laminated particle board of grade II of IS 12823 with 25mm thick top and other parts 18mm thick like shutter, back, facia etc. It shall have 3 drawers and 2 door shutter. The drawer and shutter shall be operated with ball bearing sliding channel and soft close concealed crank hinge. G-profile Aluminium handle shall be supplied for ease of opening. The ERU unit shall be mounted on 38mm Dia. Aluminium round leg. Fixed pedestal shall be supplied with an overall size 380mm X 400mm X 600mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Top shall be 25mm thick, side, back, facia shall be 18mm thick. The pedestal shall have 2 nos. of drawer having same. The drawer shall be operated with ball bearing sliding channel having load capacity 35Kg to enable smooth operation. Aluminium handle shall be provided for ease of opening. For locking provision central lock mechanism shall be given in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted on Aluminium round leg. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing workstation table in completely knock down conditions with an overall size 2400mm X 1260mm X 1200mm that is to be assembled at site. The top shall be made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table shall have panel based partition system of 60mm thick & 1200 mm height with framework made of Aluminium alloy extrusions. All Aluminium parts shall be pretreated and duly powder coated of 40-60µ thick. All these frame work sections shall be fitted to each other by fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway shall be provided of aluminum 118mm height below the work top as per requirement for inlaying of electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminum extrusions of size 60x19mm with 1.5mm thick and covered with Die Casted End caps on joints, 2 way, 3way & 4 Way caps. The Partition shall have concealed wire management capabilities for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cutouts shall be given on raceways to fix all electrical and data points. The Partition shall be in fabric pinup board. The table top shall be supported on metal base powder coated loop legs having cross-section area 40mm X 20mm. There shall be shoe provided at the bottom of the leg to avoid the scratches on the floor. 4 nos. of Mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick and drawer base 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with G-profile handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted on injection moulded nylon castor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing workstation table in completely knock down conditions with an overall size 3400mm X 3000mm X 1200mm that is to be assembled at site. The top shall have the size 1500/1500mm X 600/600mm made up of sharing based 25mm thick Pre-laminated particle board of grade II of IS 12823 with one side laminate and finish as per approved shade. The profile of the top shall be in Curvilinear shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. 12mm Fabric cladded MDF screen of Size 1000mm L x 430mm HT. The top shall be supported on MS Powder Coated Metal Pole leg having dia 100mm & Top Supported Pedestal 400Lx600DX635HT with support pipe of 40X40mm cross section. Horizontal Power Management shall be given under the top, where switch plate shall be mount on Wire Carried MS CRCA 100Dx125HT. Top Supported pedestal shall be provided with an overall size 400mm X 600mm X 635mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of eq drawer. The drawer shall be operated with recess handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg and 400mm ball bearing base telescopic channel having load capacity 35kg to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. The pedestal shall be mounted on 50mm Peg. Mid Storage 400LX1200DX1200HT on each sides it should have 2 Equal Drawer above Top Height & Below Table Top One Number of Open Shelf & 1 Shutter to be supported on 50mm Peg. The Storage shall be made up of Pre-laminated particle board of grade II of IS 12823. Storage side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The drawer shall be operated with recess handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg and 400mm ball bearing base telescopic channel having load capacity 35kg to enable smooth operation. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing workstation table in completely knock down conditions with an overall size 3060mm X 1860mm X 1200mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of two types. The top shall have the size 1500mm X 600mm with rectangle shape profile made up of 2 nos. of 25mm thick Pre-laminated particle board of grade II of IS 12823 with one side laminate and finish as per approved shade. The other top shall have the size 1500mm/1200mm X 600mm/600mm with curvilinear shape profile made up of 2 nos. of 25mm thick Pre-laminated particle board. The edges of the top shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edgebander machine at 200 0C. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60mm thick and 1200mm height with framework made of aluminium alloy extrusions. All Aluminium parts shall be pretreated and duly powder coated of 40µ-60µ thick. All these frame work sections shall be fitted to each other by fasteners of 2mm thick which is properly zinc coated for corrosion resistant. Raceway shall be of aluminium of size 118mm height below the work top as per requirement for inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminium extrusions of size 60x19mm with 1.5mm thick and covered with Die Casted End caps on joints 2 way, 3way & 4 Way caps. The Partition shall have concealed wire management capabilities and should be engineered for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cutouts shall be provided on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed to the partition frame support. The table top shall be supported on metal loop leg with powder coated having size 575mm X 700mm with cross-section area 40mm X 20mm. There shall be shoe provided at the bottom of loop leg to avoid the scratches on the floor. Mobile type pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 normal drawer having size 400mm X 150mm and 1 filing drawer having size 400mm X 293mm. The drawer shall be operated with SS base D-handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg and 400mm ball bearing base telescopic channel having load capacity 35kg to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. The Pedestal shall be mounted on injection moulded nylon castor. The manufacturershall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing Modular table in completely knock down conditions with an overall size 2450mm X 2200mm X 750mm that is to be assembled at site. The worktop shall have the size 2200mm X 1000mm x 76mm thick made up of Medium Density Fibre-board with approved veneer laminate and PU polish accordingly. The table top profile shall be in rectangle shape with round corners and full round post forming edges. The table top shall be supported on MDF board based gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 76mm thick medium density fibre-board and profile shall be in moulded construction with full round post forming edges and duly deco painted. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick medium density fibre-board in linear shape with appropriate PVC edge banding and veneer laminate. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 2200mm x 600mm X 600mm. It shall have 2 nos. of drawer, 1 nos. of filling space with door and 1 nos of open space . The drawer shall be operated with profile handle and easily close & open with the assistance of sliding channels to enable smooth operation and sliding rail track and concealed crank hinge. Drawer facai, sides and all other shall be made in 18mm thick and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The complete structure shall be supplied with approved veneer laminate, PU polish and deco painted. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 6 Seater Linear Sharing Workstation @ Overall Size :-3840LX1260DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing Modular table in completely knock down conditions with an overall size 2400mm X 2100mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 2400mm X 1200mm made up of 50mm thick Medium density fibre-board with veneer polished. The top profile shall be in rectangle shape. The table top shall be supported on MDF base Box type gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of Medium density fibre-board and the profile shall be in linear box type in tapper shape with PU Paint. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The modesty panel shall made up of 18mm thick Medium density fibre-board with PU Paint connected with both end. The table shall have one side unit for storage purpose with an overall size 900mm X 450mm X 700mm. The side unit shall be made up of Medium density fibre-board with veneer polished with top 25mm thick, bottom 9mm thick and other parts shall be 18mm thick like shutter, drawers fascia, back, side panel etc. It shall have 2 small drawers, 1 filing drawer and 1 shutters. The drawers & shutter shall be operated by ball bearing base soft-close telescopic channels and crank hinge respectively. For easily close and open the drawer groove base handle shall be made under the door. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. The manufacturershall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing Side Storage unit in completely knock down conditions with an overall size 1200mm X 450mm X 650mm that is to be assembled at site. The top shall be made up of Medium Density Fibre-board with approved veneer laminate and PU polish accordingly. The panel shall be in rectangle shape and should be 75mm thick. Veneered portion of work surface shall be finish with PU polish. The edges of the table shall be supplied with solid brass bar strips having cross-section area 25mm X 5mm all around the top. The complete unit shall be made up of medium density fibre-board duly veneer laminate and PU polish. It shall have 2 nos. of door shutter operated with the assistance of soft-close concealed crank hinge and 3 nos. of drawer operated on soft-close ball bearing sliding channel. The understructure shall consist of MS/CRCA powder coated rectangle pipe frame having cross-section area 40X20mm with 1.6mm thick. The unit have to be made in such a way that no gap should be seen in between. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and placing workstation table in completely knock down conditions with an 12 Seater Linear Sharing Workstation @ Overall Size :- 7620LX1260DX1200HT that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile Pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing back storage unit in completely knock down conditions with an overall size 2400mm X 450mm X 900mm that is to be assembled at site. The top shall be made up of Medium Density Fibre-board with approved veneer laminate and PU polish accordingly. The panel shall be in rectangle shape and should be 75mm thick. Veneered portion of work surface shall be finish with PU polish. The edges of the table shall be supplied with solid brass bar strips having cross-section area 25mm X 5mm all around the top. The complete unit shall be made up of medium density fibre-board duly veneer laminate and PU polish. It shall have 4 nos. of door shutter operated with the assistance of soft-close concealed crank hinge and 4 nos. of drawer operated on soft-close ball bearing sliding channel. The understructure shall consist of MS/CRCA powder coated rectangle pipe frame having cross-section area 40X20mm with 1.6mm thick. The unit have to be made in such a way that no gap should be seen in between. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing back storage unit in completely knock down conditions with an overall size 3000mm X 450mm X 900mm that is to be assembled at site. The top shall be made up of Medium Density Fibre-board with approved veneer laminate and PU polish accordingly. The panel shall be in rectangle shape and should be 75mm thick. Veneered portion of work surface shall be finish with PU polish. The edges of the table shall be supplied with solid brass bar strips having cross-section area 25mm X 5mm all around the top. The complete unit shall be made up of medium density fibre-board duly veneer laminate and PU polish. It shall have 4 nos. of door shutter operated with the assistance of soft-close concealed crank hinge and 4 nos. of drawer operated on soft-close ball bearing sliding channel. The understructure shall consist of MS/CRCA powder coated rectangle pipe frame having cross-section area 40X20mm with 1.6mm thick. The unit have to be made in such a way that no gap should be seen in between. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing office table in completely knock down conditions with an overall size 2400mm X 1200mm X 750mm that is to be assembled at site. The worktop shall be made up of Medium Density Fibre-board with approved veneer laminate. The top panel shall be in rectangle shape with 79mm thick (75mm MDF + 4mm Natural veneer & PU). Veneered portion of work surface shall be finish with PU polish. The edges of the table shall be supplied with solid brass bar strips having cross-section area 25mm X 5mm all around worktop. The top panel shall be supported on MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.6mm thick. The table top shall be enclosed with flapper box on both sides for electric provision duly polished. The end wall of the table on the side shall be topped by gable end. It should be 63mm thick made up of (59mm MDF + 4mm natural veneer & PU). The table shall be clad with 29mm thick (25mm MDF + 4mm natural veneer & PU) modesty panel which provide structural support for the table. The profile of the gable end and modesty panel shall be in linear shape with appropriate veneer surface. There shall be leveler provided with metal insert at the base to avoid scratches on the floor as well as uneven surfacing. The table shall be supplied with Single side pedestal unit with an overall size 600mm X 920mm X 590mm. Top, side, back, facia shall be made up of 18mm thick MDF board with approved veneer laminate. It shall have 3 nos. of drawer operated with the assistance of soft closed ball bearing channel and grooves handle for easy griping. The complete structure shall be supplied with approved veneer laminate and PU polish accordingly. The table and pedestal have to be made in such a way that no gap should be seen in between. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing office table in completely knock down conditions with an overall size 3000mm X 1200mm X 750mm that is to be assembled at site. The worktop shall be made up of Medium Density Fibre-board with approved veneer laminate. The top panel shall be in rectangle shape with 79mm thick (75mm MDF + 4mm Natural veneer & PU). Veneered portion of work surface shall be finish with PU polish. The edges of the table shall be supplied with solid brass bar strips having cross-section area 25mm X 5mm all around worktop. The top panel shall be supported on MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.6mm thick. The table top shall be enclosed with flapper box on both sides for electric provision duly polished. The end wall of the table on the side shall be topped by gable end. It should be 63mm thick made up of (59mm MDF + 4mm natural veneer & PU). The table shall be clad with 29mm thick (25mm MDF + 4mm natural veneer & PU) modesty panel which provide structural support for the table. The profile of the gable end and modesty panel shall be in linear shape with appropriate veneer surface. There shall be leveler provided with metal insert at the base to avoid scratches on the floor as well as uneven surfacing. The table shall be supplied with Single side pedestal unit with an overall size 600mm X 920mm X 590mm. Top, side, back, facia shall be made up of 18mm thick MDF board with approved veneer laminate. It shall have 3 nos. of drawer operated with the assistance of soft closed ball bearing channel and grooves handle for easy griping. The complete structure shall be supplied with approved veneer laminate and PU polish accordingly. The table and pedestal have to be made in such a way that no gap should be seen in between. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Green gaurd by UL Certification of any products, Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying & Placing Board Room table in completely knock down conditions with an overall size 4500mm X 1200mm X 750mm that is to be assembled at site. The worktop shall be made up of Medium Density Fibre-board with approved veneer laminate. The top panel shall be in rectangle shape with 79mm thick (75mm MDF + 4mm Natural veneer & PU). Veneered portion of work surface shall be finish with PU polish. The edges of the table shall be supplied with solid brass bar strips having cross-section area 25mm X 5mm all around worktop. The table top shall be enclosed with flapper box on both sides for electric provision duly polished. The end wall of the table on the side shall be topped by gable end. It should be 29mm thick made up of (25mm MDF + 4mm natural veneer & PU). The table shall be clad with 29mm thick (25mm MDF + 4mm natural veneer & PU) modesty panel which provide structural support for the table. The profile of the gable end and modesty panel shall be in linear shape with appropriate veneer surface. There shall be leveler provided with metal insert at the base to avoid scratches on the floor as well as uneven surfacing. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make-Godrej, Steelcase, Harman-Miller, Geeken

Providing and supplying Premium conference table in completely knock down conditions with an overall size 9700mm X 2450mm X 750mm that is to be assembled at site. Main Worktop size shall be W1050mm x D700mm, Corner top size shall be W700mm x D700mm & Sharing top size shall be W1800mm x D700mm The worktop shall be made up of 30mm thick Medium Density Fibre-board with approved veneer laminate. The top shall be supplied with thin layer of polyurethane polish and duly biffed for shining finish. The table top profile shall be in rectangle shape with round edges. The top shall be supported on gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick medium density fibre-board with approved veneer laminate. The top shall be supplied with thin layer of polyurethane polish and duly biffed for shining finish. The table shall be clad with 18mm thick full height modesty panel which provide structural support for the table. It should be 18mm thick medium density fibre-board in linear shape with appropriate PVC edge banding and veneer laminate. There shall be buffers provided at the base to avoid scratches on the floor. The complete structure shall be supplied with approved veneer laminate, PU polish. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA & Green Gaurd by UL, IDM certification. Make-Godrej, Steelcase, Harman-Miller, Geeken

Supplying and placing ergonomically designed, comfortable & aesthetically appealing Auditorium chair. The seat shall be made of 12mm thick hot pressed plywood with HR polyurethane foam upholstered with fire retardent fabric tapestry and the back shall be made of 15mm Plywood with PU Foam. The Chair shall have a seat sliding mechanism with Push Back. The armrest shall be made of PP Cushion Arm With Cup Holder. All metal components shall be powder coated in black colour with min 40 micron. The grouting plate shall be welded having size 170mm X 85mm X 3.5mm thick. Seat size shall be 470±10mm(W) X 440±10mm(D) and back size shall be 820±10mm (H) from seat X 540±10mm (W), & overall size - 585(L) X 710(B) X 1060(H). All fitting & Fashner shold be approved Brand Ebco/Hetich/ Haffele. Make-Godrej, Steelcase, Harman-Miller, Geeken