New Okhla Industrial Development Authority Tender

SUPPLY, ERECTION, TESTING AND COMMISSIONING OF NON CLOG SEWAGE SUBMERSIBLE PUMP SET COMPLETE IN ALL RESPECT AS PER DIRECTION OF ENGINEER IN-CHARGE. TECHNICAL SPECIFICATION OF PUMP SET SHALL BE AS GIVEN BELOW. (1) MOTOR TYPE:- SQ. CAGE INDUCTION MOTOR 960 RPM SUITABLE FOR OPERATION ON 400/440 VOLTS 3 PHASE, 50 HZ AC SUPPLY WITH F CLASS INSULATION & IP-68 PROTECTION. 2) PUMP:- (A) BODY: - CAST IRON WITH 2% NICKEL (B) IMPELLER:- CF8M(SS316) (C) SHAFT:- STAINLESS STEEL (SS304) (D) AUTO COUPLING STAND:-CF8M (SS316) (E) GUIDE PIPE:-STAINLESS STEEL (SS304) @16 MTR (F) LIFTING CHAIN: - ALLOY STEEL @16 MTR (G) MECHANICAL SEAL: - UPPER SEAL (CARBON/CHROME STEEL). LOWER SEAL (SILICON CARBIDE). (3) FIELD REQUIREMENT:- (A) TYPE: - NON CLOG SEWAGE SUBMERSIBLE PUMP (C) RPM: - 960 (D) HEAD: - 28 MTR (E) COPPER CABLE FOR SEWAGE SUBMERSIBLE PUMP SUITABLE SIZE @ 25 MTR (F) SPECIFIC GRAVITY OF SEWAGE: - 1.07 (G) SOLID HANDLING CAPACITY (DIA) ;- NOT LESS THAN 100 MM Note- CONTRACTOR SHALL BE SUBMITTED G.T.P & ALL COMPANY TEST CERTIFICATE OF THE MATERIAL USED IN PUMP SET. (Make- PULLEN PUMP INDUSTRIES PVT LTD / M/S AQUA MACHINERIES PVT. LTD. /M/S KISHOR PUMPS PVT. LTD. ) NON CLOG SEWAGE SUBMERSIBLE PUMP SET Discharge 1300 m³/hr., HEAD: - 28 MTR, Rating 165/220, OUTLET SIZE OF PIPE 300 mm dia, Cable- 2 x70 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

NON CLOG SEWAGE SUBMERSIBLE PUMP SET Discharge 800 m³/hr., HEAD: - 28 MTR,Rating 112/150, OUTLET SIZE OF PIPE 250 mm dia, Cable- 2 x50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

150 HP Motor pump dismetaling, assembling i/c labour charge

Hire charge of Generator ( Including cost Service of operating staff, supply of lubricating oil and diesel also) D G Set / Generator 63 KVA

Hire mobile crane

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.

Supply, Installation, testing, commissioning of 500 KVAR rating APFC Panel with heavy duty capacitors, contactor switched.

S/ F 1600 Amp ACB, 4 Pole , MDO with Microprocessor release ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX) ( For IPS-2, Sector-144)

Supply, Installation, testing, commissioning of 500 Amp 4 Pole MCCB TM Type, 36 KA ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX) ( For IPS-2, Sector-144)

Supply, Installation, testing, commissioning of 320 Amp 4 Pole MCCB TM Type, 36 KA ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX) ( For IPS-2, Sector-144)

Supply, Installation, testing, commissioning of 250 Amp 3 Pole MCCB TM Type, 36 KA ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX) ( For IPS-1, Sector-147)

Supply, Installation, testing, commissioning of 160 Amp 4 Pole MCCB TM Type, 36 KA ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX)

Supply and Fixing of 6 amp to 32 amp single phase MCB (10 KA) ( Legrand lexic)

Supply and Fixing of 6 amp to 32 amp three phase MCB (10 KA) ( Legrand lexic)

Supply and Fixing of 63 amp three phase MCB (10 KA) ( Legrand lexic)

S/F of Switch Disconnector Fuse as per confoms to IS 13947 (part-3) IEC;60947-3 ( 160 Amp)

S/F 400 Amp 3 Pole Power contactor ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX)

S/F 325 Amp 3 Pole Power contactor ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX)

S/F 300 Amp 3 Pole Power contactor ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX)

S/F 225 Amp 3 Pole Power contactor ( MAKE- L & T. C-POWER /D-SINE) / SIEMENS (3WL /VL) / SCHNIEDER (MASTERPACT / NSX)

S/F of Panel Board 14-16 SWG CRCA sheet Including Hinged and locking arrangement & powder coating paint,with Suitable rating Electrical grade-91 E Aluminium bus bar ( Make Hindalco / Nalco) & Wiring ( Make- Havells,/Polycab/ Rhino) complete all respect as per direction of E/I Load bearing members 14 SWG and openable members 16 SWG Sheet. 900 to 1200 mm Depth

S/F of Panel Board 14-16 SWG CRCA sheet Including Hinged and locking arrangement & powder coating paint,with Suitable rating Electrical grade-91 E Aluminium bus bar ( Make Hindalco / Nalco) & Wiring ( Make- Havells,/Polycab/ Rhino) complete all respect as per direction of E/I Load bearing members 14 SWG and openable members 16 SWG Sheet. 300 to 600 mm Depth

S/F of Panel Board 14-16 SWG CRCA sheet Including Hinged and locking arrangement & powder coating paint,with Suitable rating Electrical grade-91 E Aluminium bus bar ( Make Hindalco / Nalco) & Wiring ( Make- Havells,/Polycab/ Rhino) complete all respect as per direction of E/I Load bearing members 14 SWG and openable members 16 SWG Sheet. 600 to 900 mm Depth

S/L of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volt grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I., complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS 501 (300 Sqmm X 3.5 Core)

S/L of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volt grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I., complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS 501 (240 Sqmm X 3.5 Core)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads insulated with tape and making connection etc complete in all respect as per direction of the E/I (300Sqmm)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads insulated with tape and making connection etc complete in all respect as per direction of the E/I (240Sqmm)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads insulated with tape and making connection etc complete in all respect as per direction of the E/I (120Sqmm)

Supply and burying of 600 x 600 x 6 mm GI plate vertically 6.0 M below the GL zone earthing lead of 50 x 6 mm GI strip in B class GI pipe 32 mm for earthing with its top atleast 6 mtr below ground level duly connected from its top watering alternate layers of charcoal / coak and salt at least 150 mm thick alround etc.with cover & chamber. (E-79)

S/F of 50X 6 mm GI Strip from earth electrode directly in the ground as required complete in all respects as per direction of E/I

S/F of Ampere meter (MAKE- AE / PROCOM / CONZERVE)

S/F of Voltmeter (MAKE- AE / PROCOM / CONZERVE)

S/F of Indicating light (MAKE-ESBEE / SIEMENS / SCHNIEDER)

S/F of Indicating light ( Blue & White) (MAKE-ESBEE / SIEMENS / SCHNIEDER)

S/F of ASS (MAKE-SALZER / KAYCEE)

S/F of VSS (MAKE-SALZER / KAYCEE)

S/F of Push Button (MAKE-ESBEE / SIEMENS / SCHNIEDER)

S/F Of NO contact block (MAKE-ESBEE / SIEMENS / SCHNIEDER)

S/F Of NC contact block (MAKE-ESBEE / SIEMENS / SCHNIEDER)

S/F of CT 100/5A, 150/5A, 200/5A, 300/5A, 400/5A & 600/5A (A.E. Class-I) ( MAKE-AE / KAPPA / NORTEX)