New Okhla Industrial Development Authority Tender

M-150 Brick Work in 1:4 one cement four coarse sand of 2.20 F M Mortar in foundation and plinth including supply of all materials, labour and T&P eyc. Requaried for proper completion of work.

Providing and laying cement concrete in retaining walls, return walls, walls (anythickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

12 mm cement plaster of mix : 1:4 (1 Cement : 4 Coarse sand)

Neat Cement Punning

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction oF the Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

Steel reinforcement for R.C.C.work in including straightening cutting bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel work welded in built up sections/ framed work, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Disposal of building Rubbish/ malba/ Similar unserviceable, dismantled or weste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved.DSR-18/15.60

Providing and Fixing Factory made precast RCC perforated drain covers , having concrete of strength not less then M-25 , of size 1000x450x450 mm reineforced with 8mm dia four nos longitudinal & 9 nos crosss sectional TMT hoop bar , including providing 50 mm dia per forations @ 100 to 125 mm c\c including providing edge binding with M S flats of size 50mm x 1.6 mm complete all as per direction of Engineer-in -charge.23.9\NOIDA AOR

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable per direction of Engineer - in- charge.

Cement Concrete with 4 cm gauge approved stone ballast ,coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. Required for proper completion of the work.

Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work

White washing three coatas including supply of all materials, labour,Tools plants etc.required for proper complition otf the work.

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge

Fabrication & Manufacturing of Prestressed Hollow Core slab (Hollow area 25 to 30%) of different thickness & modular width 1200 mm in Controlled Factory Environment with approved methodology informing to IS 10297- 1982 conforming to IS : 10297- 1982 by using long line casting method having arrangement of proper steel bed. Concreting should be done by batch mixing plant capable of producing zero slump concrete, transported through automatic shuttels of standard make & layed on bed with the help of extruder/Slipformer, finishing, curing and also provision of steam curing. Cutting, making necessary cutout/holes of required sizes for services in slab element after achieving required strength, yard handling & stacking all complete as per approved shop drawings & design mix as per the direction of the Engineer-in-charge. Note : Excess/ less cement over the specified cement content used as per design mix is payable / recoverable separately . 200 mm thick hollow core slab.

Erection & Installation of Precast/Prestressed Concrete elements in correct & final position with proper line level and plumb at site making all arrangements (i.e cranes, push-pull jacks & all another T & P for lifting Placing & Alignment of elements, within erection tolerance as per IS 15916 as per approved shop drawings and all complete as per the direction of Engineer-in-Charge but excluding the cost of sim pads, non shrink grout and steel works i.e hangers. All work up to fifth floor. Prestressed hollow core Slab up to 200 mm thickness.

Supply of PVC pipe 6 kg/cum Pressure with required PVC Standerd Special confirming to IS 4985-2000 with latest amedment make Finolex Industries ltd/kisan/Supreme industries Ltd.(Rate as per Comparative statement per Rmt).160 mm dia with coupier@6 kgf/cm2 Pressure (464.58 +18% GST=548.20)

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Supply of Diesel Engine on hire charges basis, include cost of services of operating staff, All type of fuel with all complete as per direction-charges.(211.85+18% GST=249.98=SAY= 250.00)

Supply of J C B Complete at site on hire basis including cost of dise and driver etc. complete in all respect as per direction of engineer in- charge.

Supply of Tractor with Trolly Complete at site on hire basis including cost of dise and driver etc. complete in all respect as per direction of engineer in- charge.

Supply of Labour Complete at site on etc in all respect as per direction of engineer in- charge.