New Okhla Industrial Development Authority Tender

Supply and fixing of Glass Wool insulation blankets Complete in all respect as per direction of E/I. (AOR)

Supply and fixing of insulation bricks Complete in all respect as per direction of E/I. (AOR)

Supply and fixing of FD Fan for body combustion Complete in all respect as per direction of E/I. (AOR)

Supply and fixing of body holding bricks Complete in all respect as per direction of E/I. (AOR)

Supply and fixing of Refractory Bricks Complete in all respect as per direction of E/I. (AOR)

Supply and Installation and testing commissioning of front MS structural work for furnace with structural pipes and sheets of minimum 5 mm thick for supporting the internal refractory linings / Bricks and to bear heat stresses of temprature upto 1600 degree centigradeas.(AOR)

Design, engineering, Supply, installation, testing and commissioning of induced draft fan impleller made of Mild steel to withstand temperature rise in continuous duty in surrounding ambience. MS sheet covering, with induction motor 3BHP, 3 phase, 415v, 50 hz and other accessories such as belt pulley & The gases coming from the wet Scrubbing System will pass to the chimney stack through the Blower/I.D. Fan . The I.D. fan/Blower shall be designed to suck the hot gases from the wet scrubber and pump them to the chimney stack and shall have the capacity to compensate the pressure drop in the wet scrubbing system. It shall be 'V' belt driven and provided with suitable bearings, dampers, anti-vibration rubber pads, safety guards where ever necessary. (AOR)

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50mm, inner Dia 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with food mixture of retaining capacity one earth lead of 25mm x 3mm G.I. Strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra.) along with 30 cm squrare C.I. frame with hinged cover masonry housing . ps 725 (B) 2018

Supply & fixing of 5Amp to 32 Amp SP MCB (10KA) (Legand make) PS No. 1002 Cat (A)

S&F of 100 Amp 4 pole MCCB (25 KA) Thermal Magnetic release PS 1021(C ) CAT A

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS No. 501 c) 50 sqmm x 3.5 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making onnection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504 c) 50 sqmm

Location and pin pointing of LT Cable fault exposing the same in the underground LT Cables including digging of trench upto the depth of the cable, cutting the faulty cable and sealing of the faulty cable and sealing of the faulty Cable, by expert technical staff. (AOR)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.DSR-2018 1.17. A) 3 x 1.5 sq. mm DSR-2018 1.17.3

B) 3 x 2.5 sq. mm DSR-2018 1.17.12

C) 3 x 4 sq. mm DSR-2018 1.17.21

D) 3 x 6 sq. mm DSR-2018 1.17.30

Supply, Installetion, Testing & Commissioning of 450 mm dia 1400 R.P.M Exhaust fan with lovuvred shutters (AOR)

Supply and fixing of Aviiation Light suitable for 16Mtr/30 Mtr High mast. Complete in all respects as per directiion of E/I. (AOR)

Supply and wiring of submains with 2 nos. 10 sq mm and 1 no 6 sq mm FRLSH PVC insulated copper conductor cable. in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. PS 291(G)

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect complete in all respects. P.S.No. 1413 CAT AAA

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Zmmeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 100 Amp MCCB -1 No, Outgoing-63 Amp. MCCB-2 Nos. Cat. B. Pannel Cubicle Type PS No. 811 Cat A(II)

Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.PS No. 1403 Cat AAA

Supply and laying of armoured cable from furnace control panel to different motors in Trench/Tray/Wall surface. 1.1KV grade 4 Core 2.5 sqmm fire retardant PVC (Copper) including S&F MS Saddles with earthing attachment in 1xno 10 SWG GI Wire making holes etc. as necessary Including double compression frame proof glanding and termination. (AOR)

Running Operation and Caretaker/Operator/Lineman of CNG Furnance System Ist Year (02 Nos @32201/-=64402.0

Running Operation and Caretaker/Operator/Lineman of CNG Furnance System Iind Year (02 Nos @32201/-=64402.0