New Okhla Industrial Development Authority Tender

View complete overview of UP NOIDA Tender

New Okhla Industrial Development Authority

Electrical Works
View159 Views
Download61 Downloads

Opening Date

07 Sep 2021

Closing Date

20 Sep 2021

Tender Amount

₹ 12,87,97,717

Costs

Summary

Electrical Work For Golf Course In Noida Sector -151a Expressway

Description

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

  • Tender Id

    Unregistered TenderId
  • BidAward Id

    Unregistered BidAwardId
  • Tender No

    Data for unregistered User Data for unregistered User Data for unregistered User Data for unregistered User
  • Tender Authority

    Data for unregistered User Data for unregistered User Data for unregistered User Data for unregistered User
  • Purchaser Address

    Authority for unregistered User
  • Email

    Data for unregistered User
  • Website

    wwww.unregistereduser.com

BOQ Items

ItemQuantityUnitsRateAmount
... more
BOQ-A EXTERNAL ELECTRICAL RMU :11KV 4WAY RING MAIN UNIT Motorized Type (OUTDOOR KIOSK TYPE) Design, Manufacture and Supply, installation, testing and commissioning of 11 kv outdoor type RMU. RING MAIN UNIT (OUTDOOR) : A)The Outdoor type RMU Switchgear panels will be of metal clad, free standing construction, suitable for operation on 11 KV 3 Ph, 50 Hz, AC earthed system and fabricated from sheet steel, with powder coat finish painting of shade RAL 7032. The RMU panel shall contain components as mentioned below, complete with busbar inter connections control wiring designation labels, caution labels, sealing and pad locking facilities and wherever necessary space provision for entry of HT cables & separate control cable from the bottom through detachable gland plates as per the requirements and specifications. B)Scope of supply should include the following but not restricted and other items that are required for the satisfactory operation and performance of the system can be considered as required. C)The Contractor should get approval from SEB for both panels before ordering. RMU has to be supplied and erected including foundation work at location suggested by SEB and handed over to SEB(State Electricity Board)/NPCL. Supply of 11KV RMU Panel consists of: 1 x 11KV, 630A Incomer LBS With FPI COMMNICABLE. 3 x 11KV, 630A Outgoing VCB's EQUIPMENT SHALL BE STRICLY AS PER MENTIONEND BOM HERE UNDER AND SPECIFICATIONS ATTACHED HERE WITH SWITCHGEAR: A) I/C - Load breaker switch : 11KV,630A, 21KA for 3 sec Load Breaker Switch - 1 Nos B) Anti Pumping Relay - 1 Nos C)Phase Indication Lamps : Red, yellow, Blue 24V AC for ON, OFF, Auto Trip, Spring Charged, Trip Crkt Healthy D) Current Transformer -Epoxy resin cast type : Dual Ratio, Dual Core: 100/5A, Class:0.5 Metering/ 5P10 for Protection, Burden: 15VA, STC:21KA/3.0SEC as Required - 3 Nos Numeric Relay & Static Relay 1 No Non directional IDMT relay Over Voltage Relay Under Voltage Relay Master Trip Relay Testing of Circuit Breaker CT's & Relay in Both I/C & O/G Relay to be updated by Logic LBS ON / OFF Indication Lamp-LED : Red, Green 24V DC - I/C O/G - Circuit Breaker : 11kv,630A, 21KA for 3 sec VCB/SF6, Close / Trip Coil 110v DC, 230V AC for Spring Charge Motor - Draw Out Type - 2 Nos A nti Pumping Relay - 1 Nos Operating System - Manually & Motorized Circuit Breaker Operation & Spring Charging Along with Manual Operated Earthing Switch. Spring Charging Operation shall be Motorized. Current Transformer -Epoxy resin cast type : Dual Ratio, Dual Core: 50/5A, Class:0.5 Metering/ 5P10 for Protection, Burden: 15VA, STC:21KA/3 SEC as Required by EB - 3 Nos 1 No Non directional IDMT relay with 3 O/C and 1 E/F relay with high set element : 3 O/C & 1 E/F relay Over Voltage Relay Under Voltage Relay Master Trip Relay Testing of Circuit Breaker CT's & Relay in Both I/C & O/G Relay to be updated by Logic CB ON / OFF Indication Lamp-LED : Red, Green 24V DC - O/G Mech. ON/OFF indicating Lamps - I/C 1 Nos, - O/G Phase Indication Lamps : Red, yellow, Blue 24V AC - O/G CB Spring Charge Indication Lamp-led : Blue - O/G Trip Circuit Healthy Indicating Lamp-LED : White - O/G Control Switch : Trip Neutral Close, Spring Return to Neutral, 30 A DC - O/G Space Heater with switch and Thermostat : 60 W, strip type, 230 V, AC - - I/C 1 Nos, - O/G Panel Illumination Lamp with door switch : CFL, 14W, 230 V AC - I/C 1 Nos, - O/G Control Terminal Blocks : Stud type 30 amps, 1100 V grade - lot Earth Bus bar : GI flat sized for rated fault duty for 3 sec throughout the body. Main Bus bar 630A 60 x 10mm AL of size Color sleeved - lot Test terminal blocks for CTs with CT shorting Links - O/G 1 Nos Removable Power cable gland plate - I/C 1 Nos, - O/G 1 Nos Removable Control cable gland plate - I/C 1 Nos, - O/G 1 Nos Earth Switch at 11KV incoming side Mechanically interlocked - I/C 1 Nos Plug and Socket : 5 Amps - O/G Surge Arrester at common bus - O/G Power Pack : Input; 230/110V AC Output: 110V DC with Stored energy 60W sec. Continuous energy 40W and for spring charging motor also. - O/G Provision for receiving 230V A.C External Source : 10A DP MCB - 3 Nos. Manual spring charge mechanism - I/C 2 NO+2NC Aux switch - I/C 1 Nos Vacuum interrupters-630amps Manual operated spring charge mechanism Ammeter with selector switch TNC SWITCH Emergency off push button Power terminal suitable to receive HT cables Special painting for coastal environment, stainless steel bolt and nuts, IP - 54 protection type
1Nos-952995.12
... more
11KV TRANSFORMER (11KV /0.433 KV) (1000 KVA) : Supply Installtion, Testing and Commissioning of Outdoor OIL cooled Transformer 11KV / 433 Volt Rating 3 phase, Double Wound with copper Winding. (as per IS : 1180 (part 1) : 2014 Level 2), OLTC in Steps (+5% to -15:% @ 1.25%) with RTCC, Insulation Class : Class A , Temperature Rise : 40 Deg.c in Oil , 45 deg.c by Resistance, 50 deg.c by Ambient , Dyn 11 vector Group and Other Standard Accessories as Required Including Followings :- PLEASE NOTE THE TRASNFOREMR SHALL BE IN COMPLINACE WITH NEW REGUALTION IS 1180 FOR LOSSES AND EFFICIENCY and ammended upto Date Cable Termination box with disconnecting facility for 11 KV 3C-240 sq mm XLPE cable at 11 KV side. On Load Tap Changer on HV side +5% to -15% @ 1.25 % With RTCC as Well as Manual Mode with Position Indicator and Locking Arrangements. Standard Fittings & Accessories :- 1. Rating & Terminal Marking Plate - 1 , 2. Earthing Terminals -2 , 3. Lifting Lugs - 4 4. Drain Valve with Blanking Plate - 1 5. Filter Valve with Blanking Plate - 1 6. Conservator - 1 7. Conservator Oil Filling Hole with Cap - 2 8. Oil Level Indicator with Min Marking - 1 9. Dehydrating Breather - 1 10. Conservator Drain Plug - 2 11. Air Release Device - 1 12. Thermometer Pocket - 1 13. Pressure Relief Valve - 1 14. Roller Uni Directional - 4 15. Radiators (Detachable Type) - 4 16. Cable Box (HV) - 1 17. Cable Box (LV) - 1 18. Separate Neutral Terminal - 1 19.On Load Tap Changer-1 20. O.T.I with Alarm & Trip Contacts - 1 21. Buchholz Relay with Alarm & Trip Contacts - 1 22. Radiator Valves - 8 23. Marshalling Box - 1 24. Drain Valve with Blanking Plate (OLTC) - 1 25. Filter VALVE WITH Blanking Plate (OLTC) - 1 26. Current Transformer - 1 27. OLTC Surge Relay - 1 28. RTCC Panel- 1 29. AVR - 1 30. W.T.I With Alarm & Trip Contacts - 1 31. W.T.I Pocket - 1 32. Inspection Cover - 1 33. M.O.G With LOLA Contacts - 1 34. Buchholz Relay Shut off Valve - 1 35. Restricted Earth Fault Relay (REF) - 1 TOTAL FOR 1000 KVA TRANSFORMER
3Nos-1535761.92
... more
Main LT PANEL: Supply , installation, testing, Design, manufacture, supply inspection, handling, assembling, affecting proper connections, testing and commissioning of 2mm CRCA sheet steel fabricated cubical type Main L.T. Panel with PLC based load manager, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52, As per IEC60439 after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable or Aluminium Bus Duct as required. All ACB/MCCB Shall Have Zone Selective Interlocking All ACB Shall Have Ready to Close Contact All ACB shall have V,I,W,Wh,pf parameters available on the release There shall 96X96 display for each outgoing for display of all parameters like V,I,Pf,load profile etc. All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity specified for all MCCB's breakers is Ics value (service rating). Energy Analyser / MFM shall be available in incomers only and shall have ethernet Port for BMS Compatibility. Each Incoming (ACB/MCCB) shall have ON/OFF/Trip/S/C And E/F LED indication on panel Front Door. The incoming MCCB shall be Microprocessor based with inbuilt O/L & S/C release with E/F protection and all Outgoings MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C release. Manufacturer should provide the Discrimination cordination study upto the bus fault level for all MCCB/MCB/MPCB. For Earth Fault Separate External module can be used for earth Differentiation and Proper sensitivity. MAIN Panel ACB/MCCB Shall Be Communication Enable And All ACBs shall be provided with individual Modbus TCP/Ethernet ports/modules for better speed of data transfer (with at least 10mbps speed on Ethernet network). Ethernet modules provided shall be with two Ethernet ports to minimize the number of Ethernet switches required in the system. MAIN Panel ACB/MCCB Shall Be Communication Enable And All ACBs shall be provided with individual Modbus TCP/Ethernet ports/modules for better speed of data transfer (with at least 10mbps speed on Ethernet network). Ethernet modules provided shall be with two Ethernet ports to minimize the number of Ethernet switches required in the system. Separate Energy management Software shall be provided for Monitoring and control and to cater to Communication architecture provided and shall have a web client connectivity with BMS. Separate Energy management Software shall be provided for Monitoring and control and to cater to Communication architecture provided and shall have a web client connectivity with BMS. GA drawings shall be got approved from Owners / Architects / Consultants before fabrication.The panel has to be specifically fabricated as per the space available at site. The existing column positions will also be considered. Incoming from TRANSFORMER (1000 KVA) - 3 NOS. Incomer : 1 Nos 1600 Amp 4P EDO UV RELEASE ACB 50KA The ACB shall be electrically interlocked with the bus coupler, DG incomers and other transformer incomers shall have communication enabled. Display Module for ACB Relase parameters on Panel Door. TNC switch. Auto manual selector switch. 1 set of 3 CT's of ratio 1600/5A, Class 1.0 accuracy 15 VA burden for metering. 1 set of 3 CT's of ratio 1600/5A, Class 1.0 accuracy 15 VA burden for APFCR. Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM PM800 of Schneider or equi.) with Meter needs to comply fo the latest accuracy standards (IEC 62053-24) standards and new power quality standards (IEC 62586, PQI-S). 3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB Along with Hooter, Auxillary Relay, 2 Sets of Push Buttons. 7 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy/Overcurrent/Earthfault. Each lamp shall be with backup MCB. INCOMER FROM DG SET (1010 kva) 2 NOS INCOMER : 1 Nos 1600 Amp 4P EDO UV RELEASE ACB 50KA. Protection releases with LSIG and Over voltage ,under voltage,Reverse power protction & Metering & Accessories for each D G set incomers Master trip relay. Trip Circuit Supervison relay. Auto / manual / test selector switch. 1 Set - 415 /v3 / 110 / v3 Volts PT Class 1.0 accuracy and 100 VA burden along with primary & secondary MCB. 1Set - 3 CTs of Ratio : 1600/5A , Class 1.0 Accuracy 15 VA Each Burden for Metering. Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM PM800 of Schneider or equi.) with Meter needs to comply fo the latest accuracy standards (IEC 62053-24) standards and new power quality standards (IEC 62586, PQI-S). 1 No -12 point Temp Scanner with Alarm/ Trip contact for winding & bearing. 3 Nos. LED type Phase indicating Lamps, Each Lamp Shall be With bakup HRC fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons. 7 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy/Overcurrent/Earthfault. Each lamp shall be with bakup MCB. 9 window annunciator with Accept / Reset / test push button for each DG set for following indications and alarm : set fail to start, engine over heat, high temperature, excitation failure, low lube oil pressure, over speed, low fuel oil level, cooling water flow failure, breaker trip, generator fault, DC control supply failure, out of limit voltages and spares. Push buttons for Test. Accept. Reset. Fault Reset. Engine start, Engine stop, ACB close, ACB Trip Emergency stop. Shut down due to low lube oil pressure/High water temp/Over speed/Low fuel level - set of 4 indication lamps. D G control incorporating engine start / stop indicating three attempt facility and on failure to start, engine lock out. 1 nos Battery Charger With DC Voltmeter and Ammeter Suitable for the DG sets (1010 KVA) The MCCB shall be electrically interlocked with the bus coupler and Transformer incomers. INTERLOCKING Interlocking logic electrical Interlocking between incomers and bus coupler and it should have auto start and auto trip facility for Automatic Operation of the Breakers WITH MANUAL OVER RID FACILITY BUS COUPLER : 2 Nos 1600 Amp 4P EDO UV RELEASE ACB 50KA: Trip circuit supervision relay TNC switch. Auto / manual selector switch 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB. The Bus Coupler Shall be Electrically Interlocked with All Incoming of Transformer BUS BAR TPN aluminium bus bars of minimum 2000 Amp with heat shrinkable coloured sleeves , Shrouds at Joints and including DMC/SMC bus bars supports at required interval complete for cross section, side supports and their spacing etc. for withstanding fault level of 36 kA for 1 sec PLC for load management / automation Design, Manufacturing, Testing at Works, supply of PLC BASED , AUTOLOAD TRANSFER, AUTOLOAD BALANCING PANEL FOR 2Nos.1010 KVA D.G. Sets Complete as Required to Acheive the Desired Functions. PLC shall be provided in main LT panel for interlocking between different incomers and bus couplers to avoid unintentional paralleling of different supplies. PLC is not envisazed for DG SETS synchronization In addition to required hardware and software following components shall also be provided. Based on the load requirement only required no. of DG sets shall be operated. Monitoring of DG set safeties (mechanical as well as electrical). PLC Hardware as required Auxiliary relays/contactor/metering/protection etc as required 230 V AC, UPS of suitable rating Annunciators as required One no. Battery charger set consisting of Transformer / Rectifier, DC ammeter, DC voltmeter, Charging rate selector switch, Off/Trickle/boost. All control wiring from PLC to various feeders with min. of 2.5 sq mm copper FRLS cable. The PLC provided for Load Management & for interlocking of Breakers shall perform to achieve the system as described in given Main Schemetic Diagram. OUT GOING ALL ACB Will Have locable push button ALL MCCB will be microprocessor based inbuilt protections with 50ka Fault level All outgoing feeders shall be provided with one set of phase indication lamps and trip indication lamps with protection fuses/MCB and ammeter with selector switch with suitable ratio CT's of accuracy class 1.0 for metering purposes Shall be provided with ON/OFF Trip Indication LED TYPE 1 No Ameter Digital Type 17 nos. Outgoing feeders shall be provided with electronic dual reading KWHR meter with RS 485 communication port, CT's with accuracy class 1, control circuits and wiring as per SLD. 2 Nos. 800 A TP MCCB (CAPACITOR PANEL) 1 Nos. 400 A TP MCCB (CLUB LIGHT & POWER PANEL) 1 Nos. 250 A TP MCCB (BANQUT LIGHT & POWER PANEL) 1 Nos. 400 A TP MCCB (PODIUM) 1 Nos. 800 A TP MCCB (CLUB HVAC) 1 Nos. 630 A TP MCCB (BANQUT HVAC) 1 Nos. 125 A TP MCCB (ELV & MISCELLANEOUS) 1 Nos. 250 A TP MCCB (PLUMBING PANEL) 1 Nos. 100 A TP MCCB (UPS) 1 Nos. 100 A TP MCCB (EXTERNAL LIGHTING) 1 Nos. 250 A TP MCCB (FIRE FIGHTING PANEL) 2 Nos. 100 A TP MCCB (EV CHARGING) 1 Nos. 630 A TP MCCB (GOLF CART CHARGING) 1 Nos. 400 A TP MCCB (SPARE) 1 Nos. 250 A TP MCCB (SPARE) 1 Nos. 630 A TP MCCB (SPARE) NOTE:- MCCB's Wherever Specified Shall have Rotary Handle. COMPLETE MAIN LT PANEL AS ABOVE & COMPLETE-01Nos
1Nos-4394781.56
... more
AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR PANEL) - 350 KVAR Supplying, installation, testing and commissioning of cubicle type capacitior panel suitable for 415 & 3 phase 50 HZ A.C. supply System fabricated in compartmentalised design from CRCA Sheet Steel of 2 mm thick for frame work and cover, 3 mm thick for gland plates i/c powder coating in approve shade having 1600 AMP capacity TPN Aluminium bus bar DMC/SMC bus bar supprot entire pannel should have common Al. Earth Bar for Size 50 mm x 5 mm i/c Providing & fixing following switch Gear Mounting There on Fans,Grills for Proper Ventillation Complete with gaskets & inner connection i/c connection with existing CTS in the main CT Panel complete as reqd. The panel board shall be of dust and verm proof with degree of protection IP 42) A) 800 Amps TP MCCB 50KA with Microprocessor Based release and E/F proctection with time dely (Ics=100% Icu) - 1 No. B) 1000 A, 4 strip Tinned Aluminium busbar -1 Set C) Micro processor based automatic Power factor control relay i/c power factor metre in 9 steps D) Multi functional meters with suitable CTS and protection MCBS 1 set. E) 3 Nos. Phase indicating light (lamp) with MCBs protection. OUTGOINGS - 6 Sets - 125 A TP MCCB 25 KA and capacctor duly switching contactor 50 KVAR capacity auto mannual selector switch start stop push button on/off indicating lamp with protection MCB and belay timer complete to i/c 50 KVAR mixed dielectric with 7% detuned filler copper reactor type capacitor bank with inter connection 2 Set -63 Amp TP MCB 10 KA and Capacitor duly switching contactor for 25 KVAR capacity auto mannual selector switch start/stop puch button on/off indicatting lamp with protection MCB & delay timer complete i/c 20 KVAR mixed dielectric with 7% detuned filter copper reactor type capacitor bank with inter Connection COMPLETE APFC PANEL AS ABOVE & COMPLETE
3Nos-959851.2
... more
CLUB PANEL : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 400AMP 25KA FP MCCB a)1 No. 400A 25 KA, 4P MCCB (Fixed Thermal & Fixed Magnetic Releases) Upto 250A, Thermal-Magnetic Releases OR Micro-Processor Based Releases Beyond 250A. MCCB Shall Have 1NO + 1NC Auxiliary Contacts + a Trip Contact. b)415V / √3 / 110V/ √3 PT's, Cast Resin Type, 3 Phase for Metering & Indications, Suitable Rated 6A, TP MPCB of the Fault Withstand Capacity as of the Panel on the Primary Side of PT & Suitable Rated 6A, TP MCB on the Secondary Side of PT. This Metering PT shall be of Class-1 Accuracy. c)R,Y,B phase indication lamps (110V) LED Type d)ON' & Trip indication lamps (110V) LED Type e)Cast Resin Metering CT's for Each Phase of Class-1 f)Accuracy & of Suitable Burden & Ratio BUS BAR : 500AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp. g)The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 1 no 63 AMP 10KA 4P MCB (Ground Floor Light) 1 no 63 AMP 10KA 4P MCB (Ground Floor Light) 1 no 63 AMP 10KA 4P MCB (Ground Floor Light) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (Secound Floor) 1 no 63 AMP 10KA 4P MCB (Secound Floor) 1 no 63 AMP 10KA 4P MCB (Third Floor) 1 no 63 AMP 10KA 4P MCB (Third Floor) 1 no 100 AMP 4P MCCB ( MACHINE ROOM DB) 1 no 100 AMP 4P MCCB ( MACHINE ROOM DB) 1 no 63 AMP 4P MCB ( SPARE) 1 no 63 AMP 4P MCB ( SPARE) complete panel as above and complete
1Nos.-180659.08
... more
BANQUET PANEL: Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 250AMP 25KA FP MCCB A)1 No. 250A 25 KA, 4P MCCB (Fixed Thermal & Fixed Magnetic Releases) Upto 250A, Thermal-Magnetic Releases OR Micro-Processor Based Releases Beyond 250A. MCCB Shall Have 1NO + 1NC Auxiliary Contacts + a Trip Contact. B)415V / √3 / 110V/ √3 PT's, Cast Resin Type, 3 Phase for Metering & Indications, Suitable Rated 6A, TP MPCB of the Fault Withstand Capacity as of the Panel on the Primary Side of PT & Suitable Rated 6A, TP MCB on the Secondary Side of PT. This Metering PT shall be of Class-1 Accuracy. C) R,Y,B phase indication lamps (110V) LED Type D) ON' & Trip indication lamps (110V) LED Type E) Cast Resin Metering CT's for Each Phase of Class-1 Accuracy & of Suitable Burden & Ratio BUS BAR : 315AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature OUT GOINGS : 1 no 63 AMP 10KA 4P MCB (Stilt Floor ) 1 no 63 AMP 10KA 4P MCB (Stilt Floor ) 2 no 63 AMP 10KA 4P MCB (Stilt Floor for EV Charging) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (Secound Floor) 1 no 63 AMP 10KA 4P MCB (Secound Floor) 1 no 63 AMP 4P MCCB ( MACHINE ROOM DB) 1 no 63 AMP 4P MCCB ( MACHINE ROOM DB) 1 no 63 AMP 10KA 4P MCB (Terrace floor) 3 no 63 AMP 4P MCB ( SPARE) complete panel as above and complete
1Nos.-152039.06
... more
PODIUM PANEL: Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 400AMP 25KA FP MCCB A)1 No. 400A 25 KA, 4P MCCB (Fixed Thermal & Fixed Magnetic Releases) Upto 250A, Thermal-Magnetic Releases OR Micro-Processor Based Releases Beyond 250A. MCCB Shall Have 1NO + 1NC Auxiliary Contacts + a Trip Contact. B)415V / √3 / 110V/ √3 PT's, Cast Resin Type, 3 Phase for Metering & Indications, Suitable Rated 6A, TP MPCB of the Fault Withstand Capacity as of the Panel on the Primary Side of PT & Suitable Rated 6A, TP MCB on the Secondary Side of PT. This Metering PT shall be of Class-1 Accuracy. C)R,Y,B phase indication lamps (110V) LED Type D)ON' & Trip indication lamps (110V) LED Type E)Cast Resin Metering CT's for Each Phase of Class-1 Accuracy & of Suitable Burden & Ratio BUS BAR : 600P, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 1 no 63 AMP 10KA 4P MCB (Stilt Floor ) 1 no 63 AMP 10KA 4P MCB (Stilt Floor ) 10 no 63 AMP 10KA 4P MCB (Stilt Floor for EV Charging) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (First Floor) 1 no 63 AMP 10KA 4P MCB (First Floor) 3 no 63 AMP 4P MCB ( SPARE) complete panel as above and complete
1Nos.-173453.34
... more
GOLF CART CHARGING : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER: 630AMP 25KA FP MCCB a)1 No. 630A 25 KA, 4P MCCB (Fixed Thermal & Fixed Magnetic Releases) Upto 250A, Thermal-Magnetic Releases OR Micro-Processor Based Releases Beyond 250A. MCCB Shall Have 1NO + 1NC Auxiliary Contacts + a Trip Contact. b)415V / √3 / 110V/ √3 PT's, Cast Resin Type, 3 Phase for Metering & Indications, Suitable Rated 6A, TP MPCB of the Fault Withstand Capacity as of the Panel on the Primary Side of PT & Suitable Rated 6A, TP MCB on the Secondary Side of PT. This Metering PT shall be of Class-1 Accuracy. c)R,Y,B phase indication lamps (110V) LED Type d)ON' & Trip indication lamps (110V) LED Type e)Cast Resin Metering CT's for Each Phase of Class-1 Accuracy & of Suitable Burden & Ratio BUS BAR : 800AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 50 no 63 AMP 10KA 4P MCB 3 no 63 AMP 4P MCB ( SPARE) complete panel as above and complete
1Nos.-240098.55
... more
HVAC CLUB PANEL AND BANQUET HALL: Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 800AMP 40KA FP MCCB A)1 No. 800A 25 KA, 4P MCCB (Fixed Thermal & Fixed Magnetic Releases) Upto 250A, Thermal-Magnetic Releases OR Micro-Processor Based Releases Beyond 250A. MCCB Shall Have 1NO + 1NC Auxiliary Contacts + a Trip Contact. B)415V / √3 / 110V/ √3 PT's, Cast Resin Type, 3 Phase for Metering & Indications, Suitable Rated 6A, TP MPCB of the Fault Withstand Capacity as of the Panel on the Primary Side of PT & Suitable Rated 6A, TP MCB on the Secondary Side of PT. This Metering PT shall be of Class-1 Accuracy. C)R,Y,B phase indication lamps (110V) LED Type D)ON' & Trip indication lamps (110V) LED Type E)Cast Resin Metering CT's for Each Phase of Class-1 Accuracy & of Suitable Burden & Ratio BUS BAR : 1600P, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 10 no 100 AMP 25KA 4P MCCB (OUTDOOR) 1 0 no 63 AMP 10KA 4P MCCB (INDOOR ) 3 no 100 AMP 4P MCCB ( SPARE) 3 no 63 AMP 4P MCB ( SPARE) complete panel as above and complete
2Nos-491361.54
... more
FEEDER PILLAR: Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. INCOMER: 1 no. 125 A, 25KA 4P MCCB with microprocessor based releases, ON indication, 1 no. multifunction meter (showing all power parameters), with selector switch, matching cast resin CT's. BUS BAR : TPN Aluminium bus bar with heat Shrink Sleeve rated for 160A. OUTGOINGS: 12 nos 32A DP MCB ON indication lamps with 12 nos astronimical time swtich for automaitc switching of landscape light fixtures at sun set and sun rise or twillight ( auto on/ auto off and auto mode)with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site. 2 nos 40A 4P MCB (GUARD ROOM & ESS DB) 2 nos 40A 4P MCB (REFERANCEMENT HUT) 1 nos 40A 4P MCB (HIGHMAST) 8 nos 40A 4P MCB (BONDERY WALL) 2 nos 40A DP MCB (SPARE) 2 nos 40A DP MCB (SPARE) 2 nos 63A 4P MCB (SPARE) 1 Set of control wiring complete panel as above and complete
4Nos-270582.05
... more
HT CABLE AND ACCESSORIES Supply of H.T. Cable : Supply & Testing of following 11 KV( E) grade multicore Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. 3 C x 240 Sq. mm 11 KV (E)
150Meter-1138.11
... more
H.T. Cable Laying: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm
150Meter-482
... more
H.T Termination: H.T TerminationSupplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required. 3 C x 240 Sq.mm 11KV( E )
---
... more
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required. 3 C x 240 Sq.mm 11KV( E )
8Sets-17166
... more
Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required. 3 C x 240 Sq.mm 11KV (E )
2Sets-19314
... more
LT CABLE AND ACCESSORIES : SUPPLY OF L.T. CABLE: Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as Required 3.5 C X 300 Sq.mm Al. XLPE arm.
400Meter-1806.56
... more
3.5 C X 240 Sq.mm Al. XLPE arm.
200Meter-1544.48
... more
3.5 C X 185 Sq.mm Al. XLPE arm.
400Meter-1276.8
... more
3.5 C X 150 Sq.mm Al. XLPE arm.
100Meter-1071.84
... more
3.5 C X 70 Sq.mm Al. XLPE arm.
50Meter-686.56
... more
3.5 C X 50 Sq.mm Al. XLPE arm.
150Meter-551.04
... more
3.5 C X 25 Sq.mm Al. XLPE arm.
3000Meter-417.76
... more
4 C X 6 Sq.mm Al. XLPE arm.
2000Meter-332.64
... more
LT CABLE JOINTING & END TERMINATION : Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 3½ X 25 sq. mm (28mm)
4Each-250
... more
3½ X 35 sq. mm (32mm)
2Each-300
... more
3½ X 50 sq. mm (35mm)
4Each-329
... more
3½ X 70 sq. mm (38mm)
2Each-368
... more
3½ X 150 sq. mm (50mm)
2Each-555
... more
3½ X 185 sq. mm (57mm)
8Each-702
... more
3½ X 240 sq. mm (62mm)
14Each-809
... more
3½ X 300 sq. mm (70mm)
24Each-936
... more
CABLE TRAY: Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement) 150 mm width X 50 mm depth X 1.6 mm thickness
100Meter-531
... more
300 mm width X 50 mm depth X 1.6 mm thickness
100Meter-621
... more
MISCELLANEOUS ITEMS: Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
5Nos.-48
... more
MISCELLANEOUS ITEMS - NON DSR: SITC of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)
20Nos.-2605.31
... more
SITC of First aid box as approved by Indian red cross conforming to IS : 2217.
2Nos.-2056.82
... more
SITC of CO2 Fire Extinguishers 4.5 kg capacity complete in all respect ISI : 15683 marked
2Nos.-3839.4
... more
SITC of ABC FIRE EXTINGUISHER 4 KG capacity complete in all respect ISI : 15683 marked
2Nos.-4799.25
... more
SITC of Fire Bucket stand made of M S angle suitable for and with 4 Nos Fire Buckets of 9.5 Ltrs capacity
2Nos.-5347.74
... more
EARTHING: Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified
20Set-14224
... more
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect.
100Mtr.-1243.2
... more
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
100Mtr.-168
... more
Supply and fixing of testing joint of G.I. strip 32mm x 6mm and 150mm long with G.I. bolts and nut etc. complete in all respect.
20Each-72.8
... more
Supply and fixing of testing joint of copper strip 32mm x 6mm and 150mm long with tinned of brass bolts and nut etc. complete in all respect.
20Each-280
... more
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
180Mtr.-224
... more
POLE ERECTION: Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre
30Each-4492
... more
Above 6.5 metre and upto 8.0 metre
15Each-5365
... more
Above 10 metre and upto 12 metre
5Each-7326
... more
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape , Hole Seeling to be done complete as required. 32 mm dia
28Meter-324
... more
40 mm dia
5Meter-368
... more
EXTERNAL LIGHTING SYSTEM: SUPPLY OF EXTERNAL LIGHTING SYSTEM: Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect.CAT-AAA
60Nos.-9419.2
... more
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. CAT- AAA
50Nos.-6507.2
... more
Supply , Installation, Testing & Commissioning of of 3 mtr long Designed Pole, Base Plate 200mm x200mm x12mm & J Bolt M16 500mm hight.(KLIGHT-SLICE KP-4287 or equivalent)
50Nos.-6170.47
... more
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
31Nos.-18480
... more
Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completeein all respect.
4Nos-31875.2
... more
Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor platesetc completee in all respect.
2Nos-351680
... more
supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. CAT-AAA .
50Nos.-4558.4
... more
Supply and fixing of decorative 40 to 45 Watt LED Post top ( for Bondery Wall) indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect.CAT-AAA
430Nos-9419.2
... more
Supplying, Installation, Testing and Commissioning of (3-6) Watt LED of Step light for garden step complete with required nos. lamps, control gears etc, IP-66,PF0.95 complete as required as per the standard catalogue item. (BAJAJ-BLSGV4W, PHILIPS-BWGI50,LT-5000357ROYO, equivelent)
40Nos-493.64
... more
Supplying, Installation, Testing and Commissioning of (3-9) Watt LED of Uplight light for Tower (each-02Nos ) complete with required nos. lamps, control gears etc.IP-66, PF0.95 complete as required as per the standard catalogue item. (BAJAJ-BAWO-A, PHILIPS-BBP342LED1200/12W,LT-RU2057WXYZ, equivelent)
25Nos-1096.97
... more
Supplying, Installation, Testing and Commissioning of (5-9) Watt LED of spike light for tree complete with required nos. lamps, control gears etc. IP-66,PF0.95 complete as required as per the standard catalogue item. (BAJAJ-BGSBL9W, LT-POLO57NYXZ, equivelent)
76Nos-2571.03
... more
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA
16Nos.-25480
... more
Supplying, Drawing, Connecting and Testing of Following Size of PVC Insulated FRLS Copper Conductor (as per IS : 694) flexible Multicore Wire in the existing poles and bracket from cable termination connector / MCB to the fitting i/c providing suitable connectors . 3 core 2.5 sq.mm (for Poles)
1000Nos.-65.54
... more
NATIONAL FLAG MAST : Supply, Installation, Testing and Commissioning of 30.5 M Flag mast. Mast shaft shall be in four sections, hot dip galvanised & PU Painted, suitable for wind velocity as per IS 875 i.e. 50 M/s. Bottom Dia 600mm,Middle dia 225mm, top 150mm & Thikness 5/4/4mm and Base Plate Dia 840mm X30mm , Ankar Plate Dia-840X4mm & foundation bolt M30 X 1200mm X 16mm with including Template & Including gear , 1 H.P. 3P Moter SS wire rope, Traling Cable Indicator lamp & SS Decorative DOM. Material Constuction as per BSEN-10025. Mast shall be suitable for Indian Tri Color Flag Size 30 Ft X 20 Ft." A) Supply, Installation, Testing and Commissioning of control panel housing 63A TPN MCB INCOMER SINGLE DIAL TIMER CONTRACTOR CIRCUIT FOR THE AUTOMATIC CONTROL OF LUMINARIES OUTGOING TERMINAL AND CONTROL CIRCUIT FOR THE POWER TOOLS MOTER. B)Supply, Installation, Testing and Commissioningof system for Raising Lowering of Flag. It shall have double drum winch, 6 mm dia stainless steel wire rope and integral power tool for the raising and lowering of Flag. Suitable control panel shall be provided for reversing operation of Power tool motor. C)Supply, Installation, Testing and Commissioning of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. D)Supply of System & Aviation Obstruction light with 3C x 2.5 Sqmm Cu cable. E)Supply, Installation, Testing and Commissioning of 5 Mtr hot dip galvanised octagonal pole suitable to mount 1 no.LED flood light fittings at top & arrangement at bottom including supply of foundation bolts manufactured from special steel along with nuts, washers etc. ( FOR 5M POLE). F)Supply, Installation, Testing and Commissioning of BJFL 100 W LED FLOOD LIGHT FIXTURE.( 2 NO FOR EACH POLE) G)Supply, Installation, Testing and Commissioning of national flag of size 30 Ft X 20 Ft in 100% knitted Polyester (140gsm), with reinforced super-strong nylon webbing on all 3 sides & rope/toggle sleeve.(2 Set) H)Foundation Civil Work
1Set-617047.2
... more
BOQ-B INTERNAL ELECTRICAL POINT WIRING AND ACCESSORIES : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B (Rate only)
---
... more
Group C
2757Nos-990
... more
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
20Nos-1057
... more
Wiring for light/ power plug with 2X4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed heavy class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
630Mtr-200
... more
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Heavy class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
---
... more
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
---
... more
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
---
... more
2 X 6 sq. mm + 1 X 6 sq. mm earth wire (Rate only)
---
... more
4 X 6 sq. mm + 2 X 6 sq. mm earth wire (Rate only)
---
... more
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
546Mtr-543
... more
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
1680Mtr-752
... more
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
410Nos-401
... more
Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 Amps modular socket outlet and 15/16 Amps modular switch , connection etc. as required.
170Nos-495
... more
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
100Nos-32
... more
S/F Modular Type Electronic Fan Regulator : Supplying and fixing stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
240Nos-342
... more
Supplying and fixing 30 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, SPN, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
---
... more
Supplying and fixing 20 A, 240 V, TPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
88Each-1232
... more
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.(Rate only)
---
... more
MCCB, MCB & DB'S: Supplying & fixing following way prewired TP&N MCB distributionboard of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator). 4 way (4+12), Double door (Rate only)
---
... more
6 way (4+18), Double door (Rate only)
---
... more
8 way (4+24), Double door
28Nos-4601
... more
12 way (4+36), Double door
---
... more
S/F 'C' Curve , SP MCB : Supplying and fixing 5 amps to 32 amps, rating, 240/415 volts, 'C' Curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole
672Nos-199
... more
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps (Rate only)
---
... more
40 amps.(Rate only)
---
... more
63 amps.
84Nos-2640
... more
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps (Rate only)
---
... more
63 amps
28Nos-839
... more
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
56Nos-8
... more
LIGHT FIXTURES & FAN: A). It shall include all lighting fixtures complete with lamps, control gear, power factor improvement capacitor. B). All the lighting fixtures and fans samples must be gotten approved from the Owner/ Architect/ PMC before ordering on the Sub-vendor and before supply. C). All the ceiling fans shall be complete with down rods of required length. The colour and shade of fans shall be gotten approved by the Owner / Architect / PMC. D). All Exhaust fans shall be complete with mounting frames, colour and shade shall be gotten approved from Owner / Architect / PMC. E).All the fixtures / fans shall be of good quality and technically safe as per approved standard and codes. Bulk Heads :'Supply, Installation, testing & comisioning 10 W LED Bulkhead light as approved in tender document. (BAJAJ-BAWO-A, PHILIPS-BBP342LED1200/12W,LT-RU2057WXYZ, equivelent)
200Nos-706.18
... more
Swimming pool light:Supply, Installation, testing & comisioning 20-25 W LEDsumming pool light as approved in tender document.
30Nos-38394.05
... more
Recessed/Surface Mounted Downligher :Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT- AAA
450Nos-862.4
... more
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT- AAA
900Nos-1512
... more
Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT- AAA (Rate only)
---
... more
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT- AAA
80Nos-1332.8
... more
Recessed Mounted Panel Light : Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.CAT-AAA
80Nos-5465.6
... more
Supply and fixing of 36 Watt to 45 Watt indoor up-down light LED crystic Fitting for Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. jaquar-(LCRY01S040XN,Polycab-PMD0501001, equivelent)
80Nos-10969.73
... more
Exit Signs : Supplying and fixing, of LED light Exit signage of double sided Green Acrylic signage (Exit/ Name of building part written and arrow marked on it ) of suitable size with hanging arrangement with wall using super bright LED having power consumption of 3 watts minimum 2 hours battery back-up operating between 85-265 Volts A.C. making connections etc. complete as required
10Nos-3428.04
... more
CONDUITING & CABLING FOR TELEPHONE TV SYSTEM: A)TELEPHONE SYSTEM : Supply and fixing of following sizes of ISI marked heavy duty PVC conduit alongwith the accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of conduit in recessed as required. 20 mm dia
500Nos-84
... more
25 mm dia
500Nos-90
... more
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet (RJ-45)
70Nos-119
... more
Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75mm)
70Nos-243
... more
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed PVC heavy duty conduit as required.
1000Nos-49
... more
Supply and fixing NEC SV9100 DIGITAL IP PBX SYSTEM COMMUNICATION SYSTEM CONSISTING OF A). 01 PRI CARD, B). 08 P& T LINES, C). 16 DIGITAL EXTENSIONS D).64 ANALOGUE EXTENSIONS, E).EXPENDABLE UP TO 1296 PORTS. F).IN BUILT CALLER ID DIGITAL &ANALOG TELEPHONE G).COMPATIBLE TO 3 ISDN PRI / SIP /VOIP/ BRI H).NEC VOIP CARD VOIP GATEWAY, I). NEC MEMORY CARD, (4)NEC SIP EXTANSION THIRD PARTY LICENSE         - 100 % NON-BLOCKING -   2 ND CALL INDICATION         -32 PARTY CONFERENCE        -DIRECTORY DIALING BY NAME - AUTO REDIAL - EXTERNAL CALL FORWARDING        -EXTERNAL MUSIC INTERFACE       -IN BUILT BATTERY CHARGER ALL ITEMS COMPLETE AS ABOVE - 01 set
1Set-378181.37
... more
SUPPLYING & FIXING NEC 24 TXH DISPLAY KEY TELEPHONE WITH 60 DSS CONSOLE PROGRAMMABLE KEY
1Set-47992.56
... more
SUPPLYING & FIXING 12 BUTTON DIGITAL TELEPOHONE INSTRUMENTS
12Set-25778.86
... more
SUPPLYING & FIXING 200 PAIR KRONE M D F WITH METAL BOX
1Set-16454.59
... more
SUPPLYING & FIXING BEETEL PUSH BUTTON TELEPHONE M71
60Set-1576.9
... more
SUPPLYING & FIXING SERVER RACK 15U
1Set-19882.63
... more
TV SYSTEM Conduit for mostly points of TV & Telephone to be used common.: Supply and fixing of following sizes of ISI marked PVC heavy duty conduit alongwith the accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm dia
500Nos-84
... more
25 mm dia
500Nos-90
... more
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet
70Nos-119
... more
Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75mm)
70Nos-243
... more
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
1000Mtr-33
... more
DVR BASED CCTV SURVEILLANCE SYSTEMS: Supply, installing, testing and commissioning of Super High Resolution Indoor Dome Camera 1/3 CCD 5 megapixel 3.6 mm , 2 Tetra Byte Hard disk “Hikvision”
14Nos.-4113.65
... more
Supply, installing, testing and commissioning of ¼" Double Scan Super HAD CCD II High Resolution,True Day / Night Colour High Speed Dome Camera with Pole/ wall / Ceiling Mount Facility; with programmable presets for Pan & Tilt operations. WDR PTZ Dome Camera - 1/4" 26 X Optical Zoom 2 Megapixel vandal-resistant (IK10 rated) enclosure, UL Listed, 210 Presets “Hikvision”
4Nos.-47992.56
... more
Supply, installing, testing and commissioning of 16 Channel Digital Video Recorder. “Hikvision” H.265 compression, With on Board Ethernet LAN Port, and Built in Web Server for Remote Login with Standard IE commercial packages, Remote viewing, playback, control, and configuration, Mobile Device support for viewing, UL Listed, Alarm Notification Via e-mail , 8 or 16 inputs configurable NO/NC, max., input voltage 15 VDC
2Nos.-35651.62
... more
Supply, laying & termination of Armoured AB Copper Cable, 8 c x 0.75 Sq.mm PVC insulated, shielded Outer PVC Sheathed complete with fittings & G.I Supports at 0.3mtr ( for PTZ Control )
2000Mtr-75.42
... more
Supply, laying & termination of Armoured 2 X 1.5 Sq mm cable Laid on Surface / Ceiling, complete with G.I Saddles & Spacers at 0.3 mtr (ISI)
2000Mtr-61.7
... more
Supply, laying & termination of video cable in existing conduits/ raceway/cable tray if required (for short connections i.e. decoder to monitor). RG 6 cable “Polycab”
2000Mtr-68.56
... more
Supply, installing, testing and commissioning of 43" inches LED Monitor “Samsung”
2Nos.-34280.4
... more
Supplying and fixing of following sizes of heavy class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduits required. 20 mm dia conduit
2000Mtr-61.7
... more
Supplying and fixing of following sizes of heavy class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduits required. 25 mm dia conduit
2000Mtr-68.56
... more
UPS SYSTEM : UPS for Emergency Lighting & Security Systems: Supply, Installation, testing & commisioning of IGBT Rectifier based, micro processor controlled True On line double conversion 3 phase input and 3 phase 415V output 10 KVA UPS consisting of following: A). 1 No. UPS module with integrated 100% rectifier + inverter. B). Battery Circuit breaker for UPS module in CRCA housing with all required fixing accessories & hardware. C). In-built static switch for bypass & inverter in UPS module. D)..Interconnecting copper cabling (DC cabling) between UPS, Active filter, Battery breaker & Batteries of required length and size. E).OC Web card for web enabling with an inbuilt facility of event logging. F). Sealed maintenance free batteries for 10 KVA UPS with 90 mins. backup time on UPS module with inerconnectors, Rack and accessories. Rack shall have shrouds for safety from live battery terminals.(External Battery bank 100AH-20Nos with rack and interconnectors) G).Suitable MS stand of 450mm high for UPS module duly painted. H). RAM module with UPS and Cat 5 cable for RAM connectivity. I). Charger Capacity 120% 10KVA UPS described above. Notes: a). Base Frames and Batteries up to the height of the raised floor to be considered. b).Quoted prices to be include cost of equipment incluiding Packing, Forwarding charges, Transport charges,Transit insurance,loading etc. c).Quoted Price to include cost of supervision,installation and commissioning of above UPS systems
1Nos-379826.83
... more
Solar Photovoltaic Power Plant: Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.
15kWp-61060
... more
Fire Detection System SITC of Fire Alarm Control Panel (FACP): SITC of 32-bit Microprocessor based Intelligent Addressable, Peer-to-Peer networkable, 08-loop FACP (Fire Alarm Control Panel. FACP shall accommodate up to 2 nos. of 12V/7 AH batteries in its own housing and shall have a battery charging capacity of (up to) 2 nos. of 12V/18 AH housed externally. FACP shall have 854 Ch. LCD display and at least 2 custom-programmable buttons for user-specific programmable functions. Each Detection Loop of FACP shall accommodate up to 250 detectors and devices in any combination. FACP shall accommodate up to 250 detectors and devices at 100% capacity in any combination. FACP shall have a supervised electronic provision to store site-related back-up of Auto-CAD As-Built Drawings, Configuration Software Back-Up, Reports, Logs,4 GB memory card in FACP. (UL & ULC Listed and FM Approved)
1Nos.-473069.52
... more
SITC of Active Repeater Panel: SITC of Repeater Panel with 80-Character (2x40) display with supervised power supply from FACP. Repeater Panel shall monitor and control (Scroll, Acknowledge, Reset & Mute) all the events of the FACP to which it is connected and it shall have Port Vectoring / Event Filtering capability of showing only ALARMS, TROUBLES or SUPERVISORY or customized combinations of user selected events. (UL & ULC Listed and FM Approved)
1Nos.-61773.28
... more
SITC of Color Graphic User Interface Station : SITC of PC based Color Graphic User Interface Station (Client) to provide Annunciation, Status display, Monitoring & Control of each and every element connected to Fire Alarm System and Networks. Graphic User Interface (Client) shall be connected to the server PC via TCP/IP or, if necessary, Wireless connectivity. Client station shall provide full functionality of the server in terms of monitoring and control. However it shall have a provision of customized configuration where filtering of events shall be possible. It shall have provision for the configuration multiple password-protected operators with varying customized authority levels.(UL & ULC Listed and FM Approved) (Rate only)
---
... more
SITC of Multi Sensor (Photoelectric Optical Smoke + Heat) detector with base SITC of Intelligent Addressable Multi-Sensor (Optical Smoke + Heat) detector with base. The optical sensor element shall have multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. The ROR detection element shall have selectable rate of rise setting of 8°C per minute & 11°C per minute (or close to this value not deviating more than 1°C). Fixed temp detection element shall have two selectable settings of 57°C and 68°C (or closer to this value not deviating by 1°C). Multis-sensor detector shall have a configuration mode that gives separate alarms for smoke detection and heat detection and shall indicate the cause of alarm (smoke or heat). Also the multi-sensor shall have combined configuration mode of smoke and heat detection that gives only one evaluated alarm from a multi-sensor detector in case of a fire event. The detector shall have operating temperature range from -9°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing. (UL & ULC Listed and FM Approved)
180Nos.-2760.26
... more
SAME AS ABOVE BUT ABOVE CEILING INSTALLATION WITH JUNCTION BOXES
174Nos.-2972.8
... more
SITC of Smoke Sensor (Photoelectric Optical Smoke) detector with base: SITC of Intelligent Addressable Optical Smoke detector with base. The optical sensor element shall have multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. The detector shall have operating temperature range from -9°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing. (UL & ULC Listed and FM Approved) (Rate only)
---
... more
SITC of Heat Detector with base: SITC of Intelligent Addressable Rate of Rise cum Fixed Temperature Heat Detector along with base. Rate-of-Rise temperature detection element shall have two selectable settings of 8° C & 11° C (or closer to this value not deviating by 1°C) and Fixed temperature sensing shall be independent of rate-of-rise sensing and shall have two selectable settings of 57° C & 68°C (or closer to this value not deviating by 1°C). The detector shall have operating temperature range from 0°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing. (UL & ULC Listed and FM Approved)
16Nos.-2486.01
... more
SITC of Duct Detector with Sampling Tube: Analogue Addressable Duct sensor detector having multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. with required Sampling tubes& fixing accessories. (UL & ULC Listed and FM Approved)
16Nos.-7283.9
... more
SITC of Indoor Application Manual Call Points: SITC of Intelligent Addressable Double Action Indoor Application Manual Pull Stations / Manual Call Points suitable for wall/column mounting. MCP shall have red coloured housing with molded, raised-letter operating instructions of contrast colour. The MCP shall latch mechanically upon operation and shall remain so until manually reset with its key by an authorized operator. The MCP shall have operating temperature range from 0°C to 50°C and humidity tolerance range up to 93% RH, Non-Condensing. (UL & ULC Listed and FM Approved)
38Nos.-2790.42
... more
SITC of Addressable Notification Appliances - Hooter with Strobe : SITC of Addressable Notification Devices (Hooter with Strobe). Hooter with Strobe unit shall sit directly on addressable NAC (Notification Appliance Circuit) of FACP, fully supervised and powered from FACP. Hooter and Strobe elements of the combined unit shall have independent activation & deactivation criteria. Hooter shall stop at alarm "Acknowledge" and the Strobe shall stop at panel "Reset". The Hooter and Strobe element of Hooter cum Strobe combined unit shall be selected and triggered independently from FACP for performance check and maintenanace. Hooter with Strobe unit shall have provision to be tested by a hand-held field diagnostic tool in "Silent Mode" and "Full Operation Sound Mode". The Strobe shall have multiple selectable candela settings configured and selected from the FACP. The hooter cum Strobe unit shall deliver ouput up to 94 db at 3m from its installed location. The sounder/strobe unit shall display the voltage received by them at the control panel. The activation & deactivation requirement of Notification devices shall not be deviated. Suppliers not having single notification device meeting these requirements shall quote for Hooter cum Strobe with supervised control module separately, powered by FACP NAC. No external 3rd party power supply shall be permitted. (UL & ULC Listed and FM Approved)
38Nos.-4293.28
... more
SITC of Monitor Module: SITC of Intelligent Addressable, Supervised Monitor Module monitoring Potential-free, Normally Open Dry Contact input. The Monitor Module shall have operating temperature range from 0°C to 70°C and a humidity tolerance of up to 93% RH, Non-Condensing. (UL & ULC Listed and FM Approved)
9Nos.-2173.38
... more
SITC of Control Modules: SITC of Intelligent Addressable Potential-free, Form-C, SPDT contact based control module to trigger 3rd party utilities like AHU shut-off, Pressurization fan activation, Special notification activation etc. The contact shall be rated for 2A@24Vdc (Resistive) & 1A@24Vdc (Inductive). The control module shall have operating temperature range from 0°C to 49°C and a humidity tolerance of up to 93% RH, Non-Condensing. (UL & ULC Listed and FM Approved)
9Nos.-2760.26
... more
SITC of Short Circuit Isolator : SITC of Intelligent Addressable, Supervised Short-Circuit Isolator. The Isolator Monitor Module shall have operating temperature range from 0°C to 49°C and a humidity tolerance of up to 90% RH, Non-Condensing. (UL & ULC Listed and FM Approved)
50Nos.-2252.91
... more
SITC of CO detector: SITC of Intelligent Addressable, Optical smoke detector with CO detector and base. The optical sensor element shall have multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. The detector shall have operating temperature range from -9°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing. (UL & ULC Listed and FM Approved)
4Nos.-10125.06
... more
Cables: SITC of 2-Core, Copper Conductor, Multi-Strand, PVC insulated, Armoured, UTP (Unshielded Twisted Pair), FRLS Cable. Notes : A).It will be an absolute responsibility of the contractor to ensure design of fire safety system / sequence as per NFPA / NBC / Indian standards. B).Contractor shall submit the fire life safety sequence of operation of various exhaust and C).pressurization fans and AC plants for approval to client / architect / consultant before implementation. D).Contractor to submit fire detection schematic.
9000Mtrs.-74.05
... more
PA SYSTEM : Supplying, installation, testing and commissioning of Master Control Unit, PA & VA, built-in 8 loudspeaker line selector, 500W high efficiency Class-D power amplifier, non network
1Nos. -167031.93
... more
Supplying, installation, testing and commissioning of Zone Expander with single audio channel mode,built-in 24 loudspeaker line selector, 24 dry contact inputs
1Nos. -82566.4
... more
Supplying, installation, testing and commissioning of Romote Call Station, 8 preset buttons and 8 configurable buttons, optional gooseneck or PTT
2Nos. -36364.65
... more
Supplying, installation, testing and commissioning of 500W Digital Power amplifier
4Nos. -44084.59
... more
Supplying, installation, testing and commissioning of Metel Grill ceiling loudspeaker,6/3/1.5W
50Nos. -665.04
... more
Supplying, installation, testing and commissioning of Wall mount loudspeaker, 6/3W, white, ABS, Metel grill
24Nos. -1350.65
... more
Supplying, installation, testing and commissioning of Wall mount cabinet loudspeaker, 40/20/10W, white, ABS
4Nos. -8245.12
... more
Supplying, installation, testing and commissioning of 27U rack for mounting all the above equipment
1Nos. -29911.71
... more
SITC of 2-Core, Copper Conductor, Multi-Strand, PVC insulated, Armoured, UTP (Unshielded Twisted Pair), FRLS Cable.
3000Mtrs. -74.05
... more
BOQ-C FIRE FIGHTING WORK FIRE PUMPS AND ACCESSORIES: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. b)Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. c)Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. d)M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. e)Suitable cement concrete foundation duly plastered with anti vibration pads. f)2850 lpm at 70 m Head Note: * The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point.
2Set-403062
... more
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects,as required : (Diesel Driven Pump) a)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. b)Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. c) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. d)Suitable cement concrete foundation duly plastered and with anti vibration pads. 2850 lpm at 70 m Head Note: * The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point.
1Set-615198
... more
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) A).Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. B).Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. C).M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. D).Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 70 m Head
2Set-102391
... more
CONTROL PANELS: Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : Incomings: a)630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-630 A) with selector swtich & CTs etc. b)LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 800Amps Outgoings: Main Fire Pump :200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets Jockey Pump:100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets Diesel Engine Control a)Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode b)Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication c)Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine. System Controller: Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
1Set-449335
... more
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming toIS1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 200 mm. dia (wall thickness = 6.3 mm)
10RM-3169
... more
150 mm. Dia
1250RM-2376
... more
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia
9000RM-471
... more
32 mm dia
8500RM-527
... more
40 mm dia
1450RM-651
... more
50 mm dia
1150RM-787
... more
65 mm dia
900RM-1004
... more
80 mm dia
5500RM-1122
... more
100 mm dia
470RM-1499
... more
150 mm dia
400RM-2064
... more
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm
10RM-555
... more
32 mm
10RM-626
... more
40 mm
5RM-763
... more
50 mm
5RM-859
... more
65 mm
5RM-1076
... more
80 mm
5RM-1252
... more
100 mm
5RM-1627
... more
150 mm
5RM-2269
... more
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
20 Set -7494
... more
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal / Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
21 Set -7494
... more
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia
2 Set -4842
... more
100 mm dia
2 Set -6454
... more
150 mm dia
6Set-8699
... more
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 80mm dia
2Set-10549
... more
100mm dia
2Set-14428
... more
150mm dia
10Set-22550
... more
200mm dia
3Set-39133
... more
250mm dia
2Set-46318
... more
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
1Each-1291
... more
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required. 100mm dia
2Set-10836
... more
150mm dia
5Set-17577
... more
200mm dia
1Set-29075
... more
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150mm dia
2Each-10659
... more
200mm dia
3Each-22052
... more
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
90Set-5188
... more
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. A). 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 B).20 mm nominal internal dia gun metal globe valve & nozzle. C).Drum and brackets for fixing the equipmets on wall. D).Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. E).40 m
20Set-10092
... more
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
41Nos.-2402
... more
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe
2Set-6590
... more
4 way - 150 mm dia M.S. Pipe
1Set-13822
... more
3 way - 150 mm dia M.S. Pipe
1Set-9302
... more
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
2Set-18009
... more
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler
1520Each-484
... more
Upright Sprinkler
1310Each-484
... more
Horizontal side wall sprinkler
35Each-579
... more
Concealed sprinkler
600Each-1397
... more
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
---
... more
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
5Each-1508
... more
100mm dia
1Each-7362
... more
150mm dia
12Each-8869
... more
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150mm dia
3Set-47898
... more
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 700mm
200Set-1341
... more
1000mm
150Set-1540
... more
1200mm
250Set-1633
... more
1500mm
75Set-1795
... more
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required (E&M)
15Each-1094
... more
Providing and fixing MS cabinet (size 750x600x250 mm) fabricated from 16 gauge MS sheet with full front glass door & locking arrangement for pad lock with suitable shelves for keeping 25 Nos. spare sprinklers & one no. spanner properly fixed in shelves. Cabinet shall be painted with enamel paint of approved shade. (Cost shall include 20 Nos. spare sprinklers (5 Nos side wall 20Nos pendent, one No. spanner and 5 rolls of teflon tape ). Note: All valves shall be of PN16 rating
2Each-5364
... more
PORTABLE FIRE EXTINGUISHERS: Providing & fixing of ISI marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667 of not more than 0.667 and wall suspension bracket Capacity 4.5 kg
50Nos.-5623
... more
6 Kg. ABC Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.
50Nos.-1885
... more
Providing and fixing mechanical foam type fire extingushers consisting of welded M.S. trolley mounted cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, trolley etc., ISI marked as per IS:IS:13386 finished externally with red enamel paint. Capacity 50 lit (D.G.Room)
1Nos.-9384
... more
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube,high pressure discharge hose,discharge nozzle, ISI marked as per IS:2878 finished externally with red enamel paint. Capacity 22.5 kg.
4Nos.-15103
... more
BOQ-D: PLUMBING PUMP & EQUIPMENTS WATER SUPPLY, DRAINAGE, PUMPS & EQUIPMENT : Providing and fixing centralized water level controller cum indicator system, as per the following details: Centralised PLC control panel : along with touch-screen display board (min. 8" Diag. size) along with all accessories for complete controls & indication. Panel shall be made out of CRCA sheet min. 2mm thick having necessary interlocks, I/O's, required number of repeater amplifiers, all audio-visual alarms as required specifications as listed below. An emergency stop push button shall be provided in the panel. The panel shall have Modbus compatibility for seamless BMS/BAS Integration and shall be of approved make. The complete system control matrix, wiring diagram, SLD's and technical details shall be submitted by the vendor and gotten approved before commencement of execution of works. Water level indicators cum controllers :working on hydrostatic pressure measurement principle made of Stainless Steel for installation on storage tanks, and capable of providnig 4 to 20 mA analog signal compatible with PLC signal inputs and complete as per working requirements for details of equipment below. All control outputs to MCC panel shall be included as per requierments. A).Fire Static Underground tanks B).Real-Time water level indication monitoring
1Set-209038
... more
V. Low Level audio-visual alarm at less than 25% total capacity. Raw Water Underground tanks Real-Time water level indication monitoring V. Low Level audio-visual alarm at less than 30% total capacity. V. High Level audio-visual alarm at more than 100% total capacity. Auto cut-in of tubewell pumps at 35% Auto cut-out of tubewell pumps at 95%
2Set-12883
... more
Auto cut-out of raw water pumps at 35% Domestic Water Underground tanks Real-Time water level indication monitoring V. Low Level audio-visual alarm at less than 30% total capacity. V. High Level audio-visual alarm at more than 100% total capacity. Auto cut-in of raw water pumps at 35%
1Set-12883
... more
Auto cut-out of domestic water pumps at 35% Flushing Water Underground tanks At STP Real-Time water level indication monitoring V. Low Level audio-visual alarm at less than 30% total capacity. V. High Level audio-visual alarm at more than 100% total capacity. Auto cut-in of raw water pumps (from STP) at 35%
1Set-12883
... more
Auto cut-out of flushing water pumps at 35% Domestic Water Overhead tanks Real-Time water level indication monitoring V. Low Level audio-visual alarm at less than 30% total capacity.
1Set-12883
... more
V. High Level audio-visual alarm at more than 100% total capacity. Flushing Water Overhead tanks Real-Time water level indication monitoring V. Low Level audio-visual alarm at less than 30% total capacity.
1Set-12883
... more
V. High Level audio-visual alarm at more than 100% total capacity.
1Set-12883
... more
Providing complete testing kit with all chemicals complete suitable for conducting test on water quality. The test kit shall be suitable to measure TDS, pH, Hardness, Iron content and other parameters
1No.-8380
... more
Hydro-pneumatic pumping system for Domestic supply to fixture (toilet\kitchen ) : Providing, fixing and testing of packaged type skid mounted hydropneumatic system with variable frequency drive type comprising of : (i) Vertical, inline multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-304 shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply. (ii) Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 5 times the vessel operating pressure and cycle tested for 2,50,000 cycles. (iii) Control Panel with programmable logic controller (PLC) for cyclic operation of pumps + Variable Frequency Drive. The Pump working sequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter. Control panel should also consist of cooling fan. (iv) Pressure switches bellow type fitted with micro switch and having maximum pressure and differential scale should confirming BS-6134 standards and IP55 protection class. (v) All required Ball Valves, Non-return valves, flexible connectors etc. and all required accessories, Heavy Duty S.S 316 Manifold to make the system completely operational as a skid mounted system. Ball valves to be used should be Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. NRVs to be used should be with Springs and O-Ring arrangement. (Vendor to submit performance curves and technical catalog of the proposed model for review & information) Complete manifold system shall be factory aasembled & totally mounted on a common base frame with following duties: Note: Contractor to note that the suction header is required to have inlet connection from the Puddle Flange @ water tanks and to the pump suction.  Provision of delivery header is required to have outlet connection from the pumps.  Suitable outlet flanges from the delivery mainfold / header shall be provided as required. a.For Domestic water supply for Club & Benquet hall: No. of Pumps :1 (1 Working +1 Standby) Capacity : 350 LPM each pump Head : 55 Meters apx. HP (Motors) : 3 HP Location                  : Plumbing Plant Room
2Set-422797
... more
For flushing water Relift pump : No. of Pumps :1 (1 Working +1 Standby) Capacity : 250 LPM each pump Head : 55 Meters apx. HP (Motors) : 2 HP Location                  : STP Plant Room
2Set-384784
... more
Garden hydrents & floor washing Relift pump: Providing and fixing vertical, inline multistage centrifugal pumping set (Complete manufactured Skid-Mounted arrangement with manifold and accessories) with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with pressure gauge and with gunmetal isolation cocks, vibration elimination pads etc. complete with base and frame, nuts and bolts and necessary RCC foundations as per requirement as per instructions and pump shall have following duty: No. of Pumps :2 (1 Working +1 Standby) Capacity : 200 LPM each pump Head : 45 Meters apx. HP (Motors) : 4 HP Location                  : STP Plant Room
1Set-137457
... more
Supply, installation, testing & commissioning of continuous duty submersible centrifugal non-clogging drainage pumps of efficiency of approved make complete with 3 phase motor with all necessary protection and mechanical seal etc. complete with all ancillaries including float type level controllers, electrical control panels fabricatd from 14 gauge CRCA sheet volt meter ammeter with selector switch, TPMCB, 5 VA CL : CTs, phase indicating lamps protected by 2 amp SP MCB, DOL starter, necessary wiring, cable alleys, earthing, interlocking, starter with Automatic float type level controller, providion of high level alarm, sequence timer, potential free contact to starter for connection to BAS, both pumps may run simultaneously at pre determind level. (1 Working + 1 Standby) Vendor to submit proposed pump model with duty curve. a). For WTP & STP Plant room drainage : Flow rate                : 450 LPM Head                        :  15 Mts Solid Handling       : 100 MM Location                 : Sump of Basement Purpose                   : Plant Room & general area Drainage MOC                        : SS body SS Impeller & Shaft
2Set-142769
... more
b).For Basement drainage : Flow rate                 : 450 LPM Head                         :  15 Mts Solid Handling       : 100 MM Location                  : Sump of Basement Purpose                   : Basement area Drainage MOC                        : SS body SS Impeller & Shaft
2Set-142769
... more
c).Manhole Cover for U.G Tanks and Sumps : Supplying and fixing C.I. cover without frame for manholes : 560mm diameter C.I Cover(heavy duty) the weight of the cover to be not less than 108kg.
18each-6822.4
... more
f).Providing and fixing stainless steel ladder, wall mounted of 4m height(app) for underground tanks complete with flanged ends and inserts (removable type) made of 38mm/42mm dia 16 G S/S 304 quality pipe made as per international quality standards of approved shape and size with non skidding steps at 300mm vertical spacing, complete as directed by the engineer in charge.
15Kg.-1390
... more
WATER TREATMENT PLANT: Providing & fixing vertical, inline multistage centrifugal pumping set (Complete manufactured Skid-Mounted arrangement with manifold and accessories) with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with pressure gauge and with gunmetal isolation cocks, vibration elimination pads etc. complete with base and frame, nuts and bolts and necessary RCC foundations as per requirement as per instructions and pump shall have following duty: a).For Club Building only : No. of Pumps : 2(1 Working + 1 Standby ) Flow rate :150 LPM each Head : 30 Mts Required for  : Filter feed pump in Plumbing Plant room (1Working + 1Standby)
1Set-155440
... more
Providing and fixing vertical pressure filter with dual media filter (comprising of 600mm bed depth of graded sand gravel and 600mm bed depth of Anthracite) fabricated from high performance M.S plate of minimum 8mm thick for shell & 10mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, painting, testing and commissioning complete.(Tested to 6 Kg/m2) Discharge : 150 lpm Filtration Rate : 17500 lit./m2/h Discharge : 150 lpm Suggested dia app. : 0.90 m
1Each-218078
... more
Activated carbon Filter (Domestic Water) : Providing and fixing vertical activated carbon filter comprising of activated carbon filter media fabricated from high performance M.S plate of minimum 8mm thick for shell & 10mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, Epoxy painting, testing and commissioning complete.(Tested to 6 Kg/m2) Discharge : 100 lpm Filtration Rate : 15000 lit./m2/h Suggested dia app. : 0.60 m
1Each-199072
... more
Providing, fixing, testing & commissioning of MSEP water softening plant (suitable for 3 Kg/Sqcm working pressure) complete with initial charge with T-40 NA Resin, multiport valve with built in ejector for controlling all operations), regeneration system and HDPE tank, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings and water hardness testing kit & associated works. Softener shall be suitable for the following duty: Note:The successful contractor will have to carry out a test of raw water from all the sources of water for the Commercial, Residential & apartment at their own cost from a reputed lab as approved by the Engineer-in-Charge / Consultant. On the basis of these results the contractor has to submit his shop drawings, design calculations and specifications accordingly. Please note that it is ultimately the responsibility of the contractor to provide treated water for different use as per International Standard as given in the attached guidelines. Raw water hardness : 500 Mg/L Treated water hardness :100 Mg/L Regeneration Period : 12 Hrs. Capacity : 100 lpm
1Set-248489
... more
Supplying, installing, testing and commissioning of dosing system (for domestic water treatment plant) consisting of one HDPE tank of 100 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-6 lph. The motor shall be suitable for operation at 240 V / single phase/50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. The pump shall be speed & stroke control Asia LMI / equivalent make. The cost shall be inclusive of providing salt for the testing and operation of system before handover to the owner.
1Set-40052
... more
PLUMBING PANEL: Design, manufacture, assembly, wiring, testing at works and supply to site of following panels/distribution boards/switch boards. The boards shall be designed and fabricated as per general specifications, technical details, specifications and notes as part of this tender /BOQ and relevant BIS codes.(any load veriation in system as technical document of manifacture no cost shall be paid extra for system requirments) IP Rating: IP 54 Incomer : 1 No. 250 A 25 KA, 3P MCCB of motor duty - only Magnetic release. (Adjustable Magnetic release upto 250A MCCB OR Micro-Processor based release above 250A MCCB). Incomer Metering & Indication: A).415V / √3 / 110V/ √3 PT's, Cast Resin type, 3 Phase for metering & indications, suitable rated 6A, TP MPCB of the fault withstand capacity as of the panel on the primary side of PT & suitable rated 6A, TP MCB on the secondary side of PT. B).R,Y,B phase indication lamps (110V) LED Type C).Cast resin metering CT's for each phase of class-1 accuracy & of suitable burden & ratio D).1 No. Digital VAF + PF Meter (110V) (*With / Without RS 485 Port) Bus bars : 400A, TP, Aluminium Bus Bars of Electrolytic grade with heat shrinkable sleeves 25 KA. Control Transformer & Control Circuiting for Starters / Contactors & Indication Lamps : A).1 No. 415V / 55-0-55V Cast resin Dry type control transformer of adequate 'VA' burden to take care of load of all the contactor coils. (Transformer with primary taps at ± 2.5%, ± 5%, 50 Hz, centre tap earthed). B).Suitable rated 6A, DP, MPCB of the fault withstand capacity as of the panel for control circuiting for contactors coils on the primary side of control transformer & suitable rated 6A, DP MCB on the secondary side of control transformer. C).110V Control circuiting D).110V Control supply healthy indication (LED Type). Outgoings: A).DOL Starter comprising the following (for Upto 2 HP Motors) for Raw Water Pumps / Treated water transfer pump / Flushing water transfer pump / Borewell / Soft water transfer pump /For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan: a). For 1HP. (2 Nos.) (Chamical dosing Pump) b).Type-2 Co-ordination c). 1 No. suitable rated TP MPCB, 10KA, with inbuilt O/L relay & inbuilt SPP feature (site adjustable) d).Suitable sized 3P contactor with 2 NO & 2 NC Auxiliary contacts e). ON/OFF / Trip indication lamps (110V) (LED Type) f).ON/OFF Push buttons g)Star-Delta Timer h.2 Pole A/M Selector switch for BMS application i).Suitable rated single cast resin CT for metering on 'Y' phase, of Class-1 accuracy & of suitable burden & ratio. j).Digital ammeter k).ON/OFF-Trip / A/M potential free contacts for BMS l).Control wiring terminals for auto operation through potential free contacts of water tank level controllers. B).DOL Starter comprising the following (for 3 HP to 5 HP Motors) for Raw Water Pumps / Treated water transfer pump / Flushing water transfer pump / Borewell / Soft water transfer pump /For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan : a)For 4 HP. (2 Nos.) (For Pump Room Exhaust Air Fan) b)Type-2 Co-ordination c)1 No. suitable rated TP MPCB, 25 KA, with inbuilt O/L relay & inbuilt SPP feature (site adjustable) d)Suitable sized 3P contactor with 2 NO & 2 NC Auxiliary contacts e)ON/OFF / Trip indication lamps (110V) (LED Type) f) 2 Pole A/M Selector switch for BMS application g)Suitable rated single cast resin CT for metering on 'Y' phase, of Class-1 accuracy and of suitable burden & ratio h)Digital ammeter with inbuilt selector switch I)Digital ammeter J)ON/OFF-Trip / A/M potential free contacts for BMS k)Control wiring terminals for auto operation through potential free contacts of water tank level controllers. C).DOL Starter comprising the following (for 7.5 HP to 10 HP Motors) for Raw Water Pumps / Treated water transfer pump / Flushing water transfer pump / Borewell / Soft water transfer pump /For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan: a) For 7.5HP. (2 Nos.) (Raw water/Filter feed Pump) b). For 6 HP. (2 Nos.) (Soft water relifting Pump) c).Type-2 Co-ordination d).1 No. suitable rated TP MPCB, 10 KA, with inbuilt O/L relay & inbuilt SPP feature (site adjustable) e).Suitable sized 3P contactor with 2 NO & 2 NC Auxiliary contacts f).ON/OFF / Trip indication lamps (110V) (LED Type) g).ON/OFF Push buttons (with lockable off) h). Pole A/M Selector switch for BMS application i).Suitable rated cast resin CT's for metering on each phase, of Class-1 accuracy and of suitable burden & ratio j).Digital ammeter with inbuilt selector switch k)ON/OFF-Trip / A/M potential free contacts for BMS l).Control wiring terminals for auto operation through potential free contacts of water tank level controllers. D).Star-Delta Starter comprising the following (for 12.5 HP to 25 HP Motors) for Raw Water Pumps / Treated water transfer pump / Flushing water transfer pump / Borewell / Soft water transfer pump /For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan: a).12.5 HP. (3 Nos.) (Tubewells Pump) b).Type-2 Co-ordination c).1 No. suitable rated TP MPCB, -----KA, without inbuilt O/L relay (only magnetic) d).Suitable sized 3P Contactors (Star, Delta & Run contactors) with 2 NO & 2 NC Auxiliary contacts e)Suitable O/L relay with inbuilt SPP f).ON/OFF / Trip indication lamps (110V) (LED Type) g).2 Pole A/M Selector switch for BMS application h).Suitable rated cast resin CT's for metering on each phase, of Class-1 accuracy and of suitable burden & ratio i ) Digital h inbuilt selector switch j) ON/OFF-Trip / A/M potential free contacts for BMS k) Control wiring terminals for auto operation through potential free contacts of water tank level controllers. Feeders (without Starters) for Hydronumatic Pump Panels : 1 No. suitable rated 15 KA, TP, MPCB without inbuilt O/L relay & with 1 NO + 1 NC Auxiliary contacts & 'ON' indication lamp 110V (LED Type) for 10 HP Sump Pump panel. Suitable rated cast resin CT's for metering on each phase, of Class-1 accuracy and of suitable burden & ratio. Digital ammeter with inbuilt selector switch. Feeders (without Starters) for Sump Pump Panels : 2 No. suitable rated 15 KA, TP, MPCB without inbuilt O/L relay & with 1 NO + 1 NC Auxiliary contacts & 'ON' indication lamp 110V (LED Type) for 15 HP Sewarage Sump Pump panel. Suitable rated cast resin CT's for metering on each phase, of Class-1 accuracy and of suitable burden & ratio. Digital ammeter with inbuilt selector switch. Feeders (without starters) for R.O WATER Booster Pump Panels : 1 No. suitable rated 10 KA, TP, MPCB without inbuilt O/L relay & with 1 NO + 1 NC Auxiliary contacts & 'ON' indication lamp 110V (LED Type) for 3 HP R.O Water Booster Pump panel. Suitable rated cast resin CT's for metering on each phase, of Class-1 accuracy and of suitable burden & ratio. Digital ammeter with inbuilt selector switch. Spare Starter feeders(Without Starters) with same Components as described in above written Similar starter feeders: '5 HP Motors, DOL Starter (2 Nos.) (Spare feeders ) Spare Motor Feeders (Without Starters) with same components as described in above written similar feeders: 2 No. suitable rated 15 KA, TP, MPCB without inbuilt O/L relay & 1 NO + 1 NC auxiliary contacts & 'ON' indication lamp (110V) LED Type for 10 HP feeder. Suitable rated cast resin CT's for metering on each phase, of Class-1 accuracy and of suitable burden & ratio. Digital ammeter with inbuilt selector switch. 1 No. suitable rated 10 KA, TP, MPCB without inbuilt O/L relay & 1 NO + 1 NC auxiliary contacts & 'ON' indication lamp (110V) LED Type for 5 HP feeder. Suitable rated cast resin CT's for metering on each phase, of Class-1 accuracy and of suitable burden & ratio. Digital ammeter with inbuilt selector switch. Vendor can also consider integrated total co-ordinated starter upto 15HP. Plumbing Panel as described above.
1Set -523817.28
... more
SUMP PUMP PANEL (UPTO 5.0HP MOTOR): A).It shall control two pumps P-1 and P-2. The operation sequence will be as under : B).P-1 & P-2 to stop at L-1 C).P-1 to start at L-2 D).P-2 to start at L-3 (At L-3 both pump will be running) audible alarm at L-4 (50 mtr range). E).Hooter for annunciation (Solid State Buzzer) F).Where L-1 L-2 L-3 L-4 (level of water in the sump) (probes/ sensors to control operation) G).There shall be selector switch to interchange the starting sequence between P1 & P2. (Selection mode) IMPORTANT FEATURES : Sump Pump Panel shall have following essential features: R,Y,B Phase indicating lamps with backup. Auto/ Manual selector switch. Starter ON/ OFF & high level Indications, Digital ammeters for both pumps. MPCB with inbuilt O/L & SPP, DOL starter and dry run protection suitable for motors and as per details given below : Incomer: 1 No. suitable rated 35 KA, TP, MPCB without inbuilt O/L & with 1NO + 1NC auxiliary contacts for total 10 HP of Sump Pumps (Both Pumps working simultaneously). Incomer Metering & PT's : 415V / √3 / 110V/ √3 PT's, Cast Resin type, 3 Phase for metering & indications, suitable rated 6A, TP MPCB of the fault withstand capacity as of the panel on the primary side of PT & suitable rated 6A, TP MCB on the secondary side of PT. 3 Nos. Cast Resin CT's of adequate class, burden & ratio at the incomer metering. R,Y,B (110V AC) LED lamp & ON/OFF indications (110V AC) LED type. Digital VAF meter at the incomer (110V). Control Transformer & Control Circuiting for Starters / Contactors & Indication Lamps : a).1 No. 415V / 55-0-55V Cast resin Dry type control transformer of adequate 'VA' burden to take care of load of all the contactor coils. b).Suitable rated 6A, DP, MPCB of the fault withstand capacity as of the panel for control circuiting for contactors coils on the primary side of control transformer & suitable rated 6A, DP MCB on the secondary side of control transformer. (Transformer with primary taps at ± 2.5%, ± 5%, 50 Hz, centre tap earthed). c).110V Control circuiting d).110V Control supply healthy indication (LED Type). e).PT of adequate burden can also be used for powering contactor coils of starters and in that case control transformer can be eliminated. Bus bars : 100A, TP, Aluminium bus bars of required capacity & KA rating with heat shrinkable sleeves. Outgoings: Sump Pump Panel (Upto 5.0HP Motors): 2 Sets suitable rated 15 KA, TP, MPCB's with inbuilt O/L relay & inbuilt SPP features (site adjustable) & with 1NO + 1NC auxiliary contacts for 5HP each Sump Pump motor & each set with the following: a).Suitable sized 3P contactor with 2NO + 2NC auxiliary contacts b).ON/OFF/Trip LED Indications (110V) c).ON/OFF Push buttons d).2 Pole A/M selector switch for BMS application e).Suitable rated Single Cast Resin CT for metering on 'Y' phase, Class-1 accuracy & of suitable burden & ratio. f). Digital Ammeter g).ON/OFF/Trip/A/M potential free contacts for BMS h).3 Nos. suitable water level controllers with three electrodes (110AC) The Sump pump control panel shall be complete with all interconnections, water level controllers & sensors / probes, risers, internal wiring, labels, terminal block etc complete as required.
2Set-49024
... more
SUMP PUMP PANEL (FOR 7.5HP TO 10.0HP MOTOR): A).It shall control two pumps P-1 and P-2. The operation sequence will be as under : B).P-1 & P-2 to stop at L-1 C).P-1 to start at L-2 D).P-2 to start at L-3 (At L-3 both pump will be running) audible alarm at L-4 (50 mtr range). E).Hooter for annunciation (Solid State Buzzer) F).Where L-1 L-2 L-3 L-4 (level of water in the sump) (probes/ sensors to control operation) G).There shall be selector switch to interchange the starting sequence between P1 & P2. (Selection mode) IMPORTANT FEATURES : Sump Pump Panel shall have following essential features: R,Y,B Phase indicating lamps with backup. Auto/ Manual selector switch. Starter ON/ OFF & high level Indications, Digital ammeters for both pumps. MPCB with inbuilt O/L & SPP, DOL starter and dry run protection suitable for motors and as per details given below : Incomer: 1 No. suitable rated 35 KA, TP, MPCB without inbuilt O/L & with 1NO + 1NC auxiliary contacts for total 10 HP of Sump Pumps (Both Pumps working simultaneously). Incomer Metering & PT's : a).415V / √3 / 110V/ √3 PT's, Cast Resin type, 3 Phase for metering & indications, suitable rated 6A, TP MPCB of the fault withstand capacity as of the panel on the primary side of PT & suitable rated 6A, TP MCB on the secondary side of PT. b).3 Nos. Cast Resin CT's of adequate class, burden & ratio at the incomer metering. c).R,Y,B (110V AC) LED lamp & ON/OFF indications (110V AC) LED type. d).Digital VAF meter at the incomer (110V). Control Transformer & Control Circuiting for Starters / Contactors & Indication Lamps : a).1 No. 415V / 55-0-55V Cast resin Dry type control transformer of adequate 'VA' burden to take care of load of all the contactor coils. b).Suitable rated 6A, DP, MPCB of the fault withstand capacity as of the panel for control circuiting for contactors coils on the primary side of control transformer & suitable rated 6A, DP MCB on the secondary side of control transformer. (Transformer with primary taps at ± 2.5%, ± 5%, 50 Hz, centre tap earthed). c).110V Control circuiting d).110V Control supply healthy indication (LED Type). PT of adequate burden can also be used for powering contactor coils of starters and in that case control transformer can be eliminated. Bus bars : 100A, TP, Aluminium bus bars of required capacity & KA rating with heat shrinkable sleeves. Outgoings: Sump Pump Panel (For7.5HP TO 10.0HP MOTOR): 2 Sets suitable rated 15 KA, TP, MPCB's with inbuilt O/L relay & inbuilt SPP features (site adjustable) & with 1NO + 1NC auxiliary contacts for 5HP each Sump Pump motor & each set with the following: a).Suitable sized 3P contactor with 2NO + 2NC auxiliary contacts b).ON/OFF/Trip LED Indications (110V) c).ON/OFF Push buttons d).2 Pole A/M selector switch for BMS application e).Suitable rated Single Cast Resin CT for metering on each phase of Class-1 accuracy & of suitable burden & ratio. f). Digital Ammeter g).ON/OFF/Trip/A/M potential free contacts for BMS h).3 Nos. suitable water level controllers with three electrodes (110AC) The Sump pump control panel shall be complete with all interconnections, water level controllers & sensors / probes, risers, internal wiring, labels, terminal block etc complete as required.
1Set-60440
... more
SEWAGE TREATMENT PLANT: Sewage Treatment Plant Based on MBBR (Moving Bed Bio Reactor) Technology : Supply, installation, testing and commissioning of package type pre-fabricated Sewage Treatment Plant based on MBBR technology (Moving Bed Aerobic Bio-reactor) of 65 KLD capacity including all MS structure, mechanical, electrical and instrumentation works as per technical specification mentioned in the document. The scope shall also include to provide the SS bar screen in grit screen chambers, grease separator, primary & secondary treatment of waste water, air blowers, all necessary interconnecting piping & valves, pumps, DMF and ACF filters, chlorinator, ultravoilet dis-infection unit, MCC for operation of all motors, all inter connecting power and control wiring, level controllers & other controls, MS Puddle Flange (Hot dip galvanized after fabrication), inlet, outlet, overflow, vent, manhole cover etc, completed in all respect in ready to use and easy to transport condition. (The entire system to be installed above ground). A).Nature of effluent - Domestic Sewage from toilets/kitchen. B).Flow Rate - 65 KLD C).Sewage Incoming Characteristics D).pH - 6.5 - 8.5 E).BOD5 - upto 250 - 400 Mg/L F).S. Solid - 250 to 450 Mg/L G).COD 5 - Upto 600 Mg/L H).Oil & Grease - 50 Mg/L I).Effluent discharge standard after treatment J).pH - 6.5 - 7.5 k).BOD5 - Less than 10 Mg/L L).S. Solids - Less than 10 Mg/L M).COD - Less than 80 Mg/L N).Oil & Grease - Less than 5 Mg/L Sewage Treatment Plant shall include the following items: A).Oil & Grease Chamber B). Sewage equalization Tank C).MBBR tank (Moving bed Bio Reactor) D).Tube Settling Tank E).Sludge Holding tank F).Chlorine Contact Tank G).Filtration through MGF, ACF, Chlorinator & UV Sterlizer H).Air Blowers, Pumps & Equipment I).Filter Press J).Piping, valves etc K).Electrical Panel & Cabling L).All piping, valves & level indicator/controller etc. within plant room. Note: A).Contractor shall ensure submission of detailed civil General Arrangement drawings (Plan & Section), P & I (Programming & Instrumentation) diagram, schematic diagram for the above mention component & additional component such as inserts, puddle flanges, vent pipes etc. if so required for the complete working of the STP and got it approved by the Engineer in charge. B).Only Plateform for STP Plant shall be in the scope of the Owners. The sewerage treatment contractor shall co-ordinate, supervise and get all the inserts installed. All supply of MS/insert plates shall be in the scope of the sewerage treatment contractor. Supply, installation, testing & commissioning of 2 nos mild steel 5mm FRP Coating perforated corrugated Bar Screen with vertical grating made by 3 mm thick stainless steel plate, spacing of plates 20 mm c/c both sides with suitable lifting arrangement (size 750 mm wide x 600 mm high approx) C).Supply, installation, testing & commissioning of 2 nos mild steel 5mm FRP Coating perforated corrugated Bar Screen with vertical grating made by 3 mm thick stainless steel plate, spacing of plates 20 mm c/c both sides with suitable lifting arrangement (size 750 mm wide x 600 mm high approx) D).Supply, Installation, Testing and Commissioning of the following tanks and chambers in HDPE/PVC as per approved drawings and directions of Engineer Incharge. The cost shall include all the required MS walking platform, handrail, staircase, manhole cover etc. All above Quoted with minimum 10mm M.S tanks with 5mm FRP coating protection a).MBBR tank of capacity 25000 Liters b).Tube settler tank of M S c).Sludge holding tank of capacity 5000 Litres d).Chlorine Contact tank of capacity 10000 Litres e).Treated water tank of capacity 15000 Litres Quoted with minimum 10mm M.S tanks and all above item as per design requirments (No extra payment shall be paid)
1SET-1972499
... more
Supply, installation, testing & commissioning of Horizontal type pumps, having cast iron body, C.I. impeller & shaft connected to TEFC motor for 415 volts, 3 phase, 50 cycles A.C. power supply with mechanical /gland seal. Protection complete in all respects including suction and delivery headers with UPVC pipe of required dia, isolation valves, NRV & Pumps shall have following duty: a).Raw Sewage Transfer Pump(Pumps to be suitable to handle Solid handling capacity upto 40 mm size) Set of two pumps (1 Working + 1 Standby) Capacity - 2.5 LPS ( Required- 2.5M3/hr) Head - 10-12 Mtr. H.P. - 2 HP Approx.
1Set-104756
... more
b).Submersible sewage lifting pump Set of two pumps (1 Working + 1 Standby) Capacity - 1.5 LPS Head - 10-12 Mtr. H.P. - 2 HP Approx. (Solid handling capacity upto 40 mm size)
1Set-104756
... more
Supply, installation, testing & commissioning of Electromagnetic type flow meter at the outlet point of raw sewage transfer pump of 50 mm size suitable for 0 - 15 KLH flow.
2Each-36333
... more
Supply, installation, testing & commissioning of twin type rotary air blower with acoustic encloser, driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Capable of delivering 70 cum/hr of free air at 0.5 kg/cm2.
2Each-194720
... more
Supply, installation, testing & commissioning of Air piping shall comprise of pipes droppers/ laterals with MS (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc including cutting holes in wall, makes chases in wall and making good the same. Contractor to submit detailed P&I indicating their proposal.
1Lot-74346
... more
Supply, installation, testing & commissioning of fine air diffusers capable of delivering 10-12 cum/hr in MBBR tank for providing areation.
1Lot-45013
... more
Supply, installation, testing & commissioning of coarse air diffusers capable of delivering 3-6 cum/hr in equalization tank and sludge holding tank for providing areation.
1Lot-42669
... more
Supply, installation, testing and commissioning of high surface area @ 400 M2/M3 at least ring type media to be used for bacterial growth installed in moving bed bio reactor tanks.
1Job-117427
... more
Supply, installation, testing and commissioning of PVC tube deck settling media to be installed in Tube Settling Tank. The Media to be supported on MSEP frame with baffle plate & overflow launder.
1Job-75613
... more
Supply, installation, testing and commissioning of single stage horizontal centrifugal self priming pump with with C.I body, bronze impeller, shaft of stainless steel, shaft sleeve of chrome steel and delivery casing in C.I with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, sequence running controller, dry running Protection, 80x40 mm I section base plate bolted to cement concrete foundations complete includingisolation valves, NRV & vibration eliminators on both suction & delivery side of pumps .Vendor to submit performance curves and technical catalogue of the proposed model for review and information. a).Sludge Feed / Transfer Pump(Pumps to be suitable to handle Solid handling capacity upto 8-10 mm size) b).Set of two pumps (1 Working + 1 Standby) c). Capacity - 1.5 LPS d).Head - 10.0 Mtr. e).H.P. - 1.5 HP Approx.
1Set-96900
... more
Supply, installation, testing and commissioning of horizontal centrifugal pumping set with cast iron body, bronze impeller, shaft of SS and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415 +/- 10% volts, 3 phase 50 cycles A.C supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, dry running Protection, 80x40 mm I section base plate bolted to cement concrete foundations complete including isolation valves, vibration eliminators on both suction & delivery side of pumps and NRV on delivery side of pumps Vendor to submit performance curves and technical catalogue of the proposed model for review and information. a).Filter Feed Pumps b.Set of two pumps (1 Working + 1 Standby) c).Capacity - 3.0 LPS ( Suggested and quoted for 5000LPH) d).Head - 30.0 Mtr. e).H.P. - 3.0 HP Approx.
1Set-92085
... more
Supply, installation, testing & commissioning of vertical self supporting filtration unit fabricated from MS sheet as per IS: 2825 (minimum thickness of shell 8 mm and dished ends 10 mm) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories, with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete. a).Mulitgrade Pressure Sand Filter Capacity - 5000 lph Filtration rate - 14000 lph/sqm Filter dia approx. - 800 mm Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1Each-194720
... more
b).Activated Carbon Filter Filtration rate - 14000 lph/sqm Filter dia approx. - 800 mm Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1Each-226397
... more
Supply, installation, testing & commissioning of metering pump type chemical doser with 100 lits. PVC/HDPE solution tank, injection fitting assembly, suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects.
1Each-28097
... more
Supply, installation, testing & commissioning of ultravoilet dis-infection unit. The unit shall have over 99.9 % bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS 316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 6000 hours. The unit shall be complete with temperature safety control, lamp out alert circuit & UV radiometer with 4 – 20 mA output. The UV unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control, lampout alert, UV radiometer along with UV monitoring system and UV monitoring readout panel. The UV Dosage should be 60,000 uW – Sec / sq.cm. The lamps should be selected based upon the flow requirement of respective unit. Flow Rate : 5 Cum/Hr
1Each-101018
... more
Supply, installation, testing & commissioning of all pipings (as described below) and isolation control valves including all necessary fittings and clamps, supports, hangers as required i/c cutting and making good the walls wherever required complete in all respects for making the system complete. a).GI : Submerged air piping( We suggest uPVC. GI is never used for submerged piping) MS Epoxy : Air piping & pumped effluent riser (non-submerged) UPVC : Interconnecting pipe line after delivery header of pump/filter Controllers with low voltage relays, stainless steel probes and pvc shroud, control cabling as required length. (No of probes as required for function of each controller).
1Job-117427
... more
b).Filter Feed Pumps To cut off duty pump on low water level in the chlorine contact tank and high water level in the treated water tank and To start pump at low water level in the treated water tank.
1Each-3177
... more
Supply, installation, testing & commissioning of Filter Press of Plate size 18" x 18" x 12 Nos. plate with Screw feed pumps of 5 M3/Hr @ 40 M head capacity (1 working + 1 standby) complete in all respects.
1Set-201055
... more
Providing installing testing and commissioning of ultra filteration (UF) system for further polishing treated effluent and capable of producing 5,000 litre/hour. The system shall be complete with UF feed pumps (1W+1S), backwash pumps (1W+1S), cartridge filters (fabricated|), UF membranes flushing / cleaning system complete instrumentation for automation and monitoring rotameters pressure gauges interconnecting pipeword electrical cabling and switchgear, all complete Electrical Installation for STP
1Set-832620
... more
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Quoted rates shall be inclusive of cables (in accordance to specification) with earthing from panel to each motor/equipment. Motor Control Centre Incoming: a).200 amps TPN MCCB with the following accessories: b).0-500 volts 96 x 96 mm square electronic voltmeter with selector switch shall be protected by 2 amps TP MCB. 1 set. c).0-100 volts 96 x 96 mm square electronic voltmeter with selector switch and shall be 100./ 5 amps 10 VA CL: CTs. 1 set. d).Pharse indicating lamps shall be protected by 2 amp SP MCB 3 Sets. Bus Bar: a).200 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves. Outgoing; a).10 Nos. of 25 amp capacity TPN MCB with 10 Nos. DOL starters and out going feeders to all the pumps etc. (including standbies). Each compartment shall contain auto/ manual selector switch and indicating lamp with MCB’s for ‘ON/OFF/TRIP’ status of motor b).Spare 25 amps TPN MCB's 2 Nos. c).Spare 32 amps TPN MCB's 2 Nos. d).Necessary cable alleys, internal/cabling, wiring, cabling from MCC to various pumps/equipment and interlocking, earthing for all equipment shall also included MCC for all STP equipments / pumps as described above. Notes : a).All MCCBs / MCBs shall be of 15 KA breaking capacity and suitable for motor duty application. b).All motor starters shall be provided with Automatic level controller. c).DOL starters shall be used for motors below 10HP and Star-Delta Starters for other motors . Motor Control Centre Incoming 200 amps TPN MCCB with the following accessories: 0-500 volts 96 x 96 mm square electronic voltmeter with selector switch shall be protected by 2 amps TP MCB. 1 set. 0-100 volts 96 x 96 mm square electronic voltmeter with selector switch and shall be 100./ 5 amps 10 VA CL: CTs. 1 set. Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets. Bus Bar 200 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves. Outgoing 10 Nos. of 25 amp capacity TPN MCB with 10 Nos. DOL starters and out going feeders to all the pumps etc. (including standbies). Each compartment shall contain auto/ manual selector switch and indicating lamp with MCB’s for ‘ON/OFF/TRIP’ status of motor Spare 25 amps TPN MCB's 2 Nos. Spare 32 amps TPN MCB's 2 Nos. Necessary cable alleys, internal/cabling, wiring, cabling from MCC to various pumps/equipment and interlocking, earthing for all equipment shall also included Notes : All MCCBs / MCBs shall be of 15 KA breaking capacity and suitable for motor duty application. All motor starters shall be provided with Automatic level controller. DOL starters shall be used for motors below 10HP and Star-Delta Starters for other motors . Provision shall be made for providing potential free contacts to all pumps starters. MCC for all STP equipments / pumps as described above. Sub Total of PART A
1No.-315633
... more
PART B ( O & M Cost) ( for 5 years (60 Months )from Final Handing Over of all Works.) (optional) Trained operator to operate the STP round the clock including Operator and regular visit of Supervisor. Per Annum Including all Charges like AMC , Monthly charges of water analysis and all consumables etc included. Sub Total of PART B (Rate only)
---
... more
PART:C Providing & laying UPVC pressure pipes of 6 Kg/Sq.cm pressure rating class 3 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. 200 OD
20RM-3014
... more
Constructing RCC chamber of holding capacity 10 m3 with grade of M25 including cost of centering ,shuttering & PCC below foundation in 1: 5:10 & 75 mm thick and inside chamber of 75mm thick as per standard design including inside plastering with cement mortar 1:6 (1 cement :6 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design .rate to include cost of reinforcement ,excavation and filling of earth. Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The Contractor has to detect different unilities like sewer line , water supply line , electrical cable , telephone cable , gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of engineer in charge.all kinds of soil. Depth upto 1.5m from existing ground level
650cum-156.9
... more
b)Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
100cum-101.6
... more
Providing & Laying cement concrete - all works upto plinth level : c)1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
20cum-5789.6
... more
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). a)upto plinth
90cum-7997.3
... more
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. b)Thermo-Mechanically Treated bars of grade Fe-500D or more
10598kg-83.5
... more
Centering and shuttering including strutting, propping etc. and removal of form for : c)Foundations, footings, bases of columns, etc. for mass concrete
100sqm-284.85
... more
d)Suspended floors, roofs, landings, balconies and access platform
200sqm-693.05
... more
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 10 in foundation and plinth in: a)Cement mortar 1:6 (1 cement : 6 coarse sand) For 230mm thick Brick work
240cum-6157.45
... more
b)12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
500sqm-266.85
... more
c)15 mm cement plaster on rough side of single or brick wall of mix: 1:4 (1 cement: 4 fine sand)
500sqm-307.9
... more
d)6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
150sqm-227.35
... more
Designing, Preparation of Shop Drawings, Supplying, Erection, Testing, Commissioning of all Mechanical, Electrical and other components including getting approval of successful test results from approved / authorized agency from Pollution & Environmental Authorities, Operating & Maintaining upto successful commissioning, for 5 m3/day capacity Sewage Treatment Plant Sewage Treatment Plant near workshop area (Complete system to be compact type, skid-mounted / cabinet enclosed, as per detailed shop drawings to be approved) Suprime/sintex make TOTAL C/F TO SUMMARY
1Each-959329
... more
R.O Water Treatment Plant: Supply, installation, testing and commissioning of R.O. Plant capacity of 750 LPH (Complete system to be compact type, skid-mounted / cabinet enclosed, as per detailed shop drawings to be approved) for the following parameters and consisting of (but not limited to) the following main components:- (i) Inlet Quantity : As per Detailing (ii) Output Quantity : 750 LPH (iii) Inlet TDS : 600 PPM (iv) Outlet TDS : 75 PPM (v) Inlet Hardness : 350 PPM ) (vi) Outlet Hardness : 50 PPM ) Raw Water pumps of horizontal, centrifugal type suitable for a flow rate of 1500 LPH at 25m head. The Pump construction shall be of SS-304 & impeller shall be also SS-304. The motor shall be TEFC suitable for a supply of 415V/3-phase/50Hz supply. The pump shall be supplied complete with base channel coupling foundations, bolts, pressure gauge at inlet and outlet of each pump. -- 2 Nos.(1W+1S) Special Antiscalant Dosing System consisting of one HDPE tank of 100 litre capacity with a positive displacement diaphragm dosing pump having variable flowrate of 0-6 LPH. The motor shall be suitable for operation at 240V/single phase/50Hz supply. the pump shall be supplied complete with necessary polypropylene piping, valves, strainers & injection fittings. -- 1 Set Micron cartridge filter suitable for a flowrate of 1500 LPH to achieve particle filtration of less than 5 microns. The unit shall be supplied complete with inlet and outlet branches removal cap for replacement of element, inlet and outlet pressure indicators. (One for the pressure treatment & other for CIP system) MOC: Polypropylene -- 2 sets R.O High Pressure feed pumps of vertical, multistage centrifugal type suitable for a flowrate of 2000 LPH at 14 Kg/sq.cm. The pump construction shall be of SS-316-L & impeller shall be also SS-316-L. The motor shall be of TEFC suitable for a supply of 415V/3 phase/50 Hz supply. the pump shall be supplied complete with base channel coupling foundation, bolt, pressure gauge at inlet and outlet of each pump. - 2 Nos. R.O. modules made out of Spiral Wound Thin Film composite suitable to withstand pressure of 20kg/sq.cm. Suitable BSPT/NPT connections shall be used for connecting feed & reject ends. the modules shall be supplied complete with all necessary instrumentation, valves for sampling, drain, reject & permeate, epoxy-coated structural steel bases and supports, as per following system capacity requirements: (i) Total net treated water output of system = 750 LPH (ii) System recovery = 50 - 60 % (iii) Filtration area per membrane = 85 sq.ft. (iv) Number of membranes = The total number of membranes required shall be as per requirements, supported by calculations from the vendor. Centralised PLC control panel along with touch-screen digitial display board along with all digital sensors for TDS & Flow, made out of CRCA sheet min. 2mm thick having main contactors for all pumps (listed above) including SPP, 3 phase thermal overload relay. The control panel for monitoring and control of P.O. system shall include all required signal lamps, HRC fuses, Annunciation box with Hooter. All control and power cabling along with double earthing between the panel shall be included in the scope of supply of the contractor. An emergency stop push button shall be provided in the panel. The MCC panel shall have the following interlocks:- i)High Pressure Pump unit trip in case of Low suction pressure. ii)High Pressure Pump unit trip in case of High discharge pressure. iii)Special anti-scalant dosing pump trips in case high pressure pump trips and vice versa. iv)High Pressure pump trip in case of high conductivity in permeate. v)SHC dosing pump trips incase high pressure pump trips and vice versa. vi)ORP with dump valve. -- 1 Set i)First fill of all chemicals and lubricants to commission and operate the plants. --1 Lot j)All interconnecting piping work with valves:- i)Low Pressure Side till R.O. feed water pump. Piping shall be of extra strong PVC and all valves shall be of extra strong PVC and all valves shall be PVC ball valves. -- 1 Lot ii)High Pressure side piping from the R.O. high pressure pumps to the reject stream control valves shall be of SS - 304 using all SS fittings ball valves of suitable pressure rating shall be used till 25 mm size, above 25 mm, flanged globe/ wafer butterfly valves in SS construction shall be used. Rejects pressure control valves shall be globe valve and feed flow control valve shall be of SS-304. -- Lot iii)Before procurement of material contractor should be get technical approval from Consultants. (All for above from "A" to "J" complete)
2Set-378809
... more
R.O water Storage Complete 316 Stainless Steel treated water storage tank (double Wall ) of capacity 2000 Litres including all inlet/outlet connections, accessories, valves, double seal manhole covers, insulation etc. The Stainless steel tank must be ozone resistant and to be used as ozone contact tank. Fabrication to be done as per approved shop drawing.(Make :Nector )
2Set-88074
... more
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank..
2000per litre-8.8
... more
Activated Carbon Filter (automatic type for online installation before the Micron Filters) suitable for a flow rate of 1500 LPH. The material of construction shall be composite FRP. The unit shall be supplied complete with multi-port valves, inlet and outlet branches removal caps of replacement of elements inlet and outlet pressure indicators. -- 1 Set
2Set-26304
... more
Hydropneumatic System for R.O Supply Providing fixing and commissioning suitable complete composite hydropneumatic system consisting of horizontal/vertical multistage centrifugal pump having stainless steel impellers, stainless steel shaft, stainless housing and single mechanical seal and pressurised tank of required specifications and of non-toxic rubber diaphragm, complete with all accessories including pressure switch, pressure gauge and electrical panel with all necessary protection and operational devices i.e alternate pumping operation and shut off during dry running conditions etc., and inclusive of SS 316 suction and delivery manifold of required size with non-return valve and ball valve and with suitable electrical motor to be operated on 210/220 or 400/440 volt 50 cycle suitable for following duty and with total no. of pumps - 2 nos. (1 working + 1 standby) complete with the approval of Engineer-in-charge.- Before procurement of material contractor should be get technical approval from Consultants. a) Discharge : 150 LPM b) head : 45 M c) App. Capacity of the Vessel (FRP) : As Required Total C/O to Summary
2Set-315094
... more
HOT WATER BOILERS AND OTHER RELATED ACCESSORIES Electrical Hot water Generators system with Solar back up. Hot water mixing storage tank ( 2 sets For Club and benquet hall) Supply, installation, testing and commissioning of Solar Water Heating System capable of generating 7500 LPD of hot water per day at 60 OC along with insulated horizontal hot water mixing tank capacity and design code I.S: 2825 fabricated of 6 mm thick S.S. 304 plate and 10 mm thick dished end and nozzles complete with inlet, cold water inlet/outlet chain connection with flanges, manhole with bolted cover with 72 KW electrical back up along with control panels . Tank shall be insulated with 50 mm thick resin bonded fibre glass (density 24 kg/cum) and covered with 500g polythene sheet and 24 gauge aluminum sheet cladding giving proper overlaps and sealing the joints with suitable adhesive compound, including the following additional accessories / specifications: Working Pressure : 7.5 Kg/cm² i) Safety valve ii) Dial type thermometer iii) Thermowell for thermostat elements Cold water inlet valve 80 mm dia Check valve in cold water inlet 80 mm dia. Hot water inlet/outlet secondary side 50 mm dia valve plate type heat exchanger compleate with pumps required specification. Hot water outlet connection valve to system 100mm dia plate type heat exchanger compleate with pumps required specification. Hot water outlet connection valve to system 100mm dia Hot water return inlet 65 mm dia Drain valve 50 mm dia Air Release Valve 25mm dia Hot Water Return NRV 65 mm dia Solar Pre heating working Inlet 80 mm dia Butterfly Valve Solar Pre heating working Inlet 80 mm dia NRV Electrical control panel as per approved apecification Temp. Controller
2Set-1909651
... more
Hot water Return pumps for Domestic Water Providing and fixing horizontal multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-304 shaft as per IEC standards and SS - 304 suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 rpm, suitable for 400/440 V phase, 50 Hz A.C. supply with pressure gauge and with gunmetal isolation cocks, vibration elimination pads etc. complete with base and frame, nuts & bolts and necessary RCC foundations as per requirement as per instructions and pump shall follow following duty Nos : 2 (1 W +1 S) Capacity : app.100 LPM Head : 15 M
2Each-95887
... more
Solar Hot water re-curculation pumps : Providing and fixing horizontal multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-304 shaft as per IEC standards and SS - 304 suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 rpm, suitable for 400/440 V phase, 50 Hz A.C. supply with pressure gauge and with gunmetal isolation cocks, vibration elimination pads etc. complete with base and frame, nuts & bolts and necessary RCC foundations as per requirement as per instructions and pump shall follow following duty Nos : 2 (1 W +1 S) Capacity : app100 LPM Head : 55 M
2Each-75512
... more
Electrical Panel Providing motor control centres fabricated from 16 gauges M.S. sheet with powder coated finish. The control panels should be comparable with H.P. of the motor as specified. For Hot water , steam genration systems Hot water recuculation pumps,hot water supply pumps condensate pumps etc. a)One incoming main isolation MCCB of required rating. b)Fully taped aluminum bus bar of required capacity in a separate bus bar chamber. c)Isolation switch units with MCCB of required rating, for each unit. d)Fully automatic DOL starter with push button and ON/OFF indicating lights for each unit, for following requirements: i) Hot water boilers 2 Nos. of required 74 KW each ii) Hot water re-circulation pumps 2 Nos. (1 working+ 1 stand by) of required HP iii) Solar Hot water Recirculation pumps 2 Nos. (1 working+ 1 stand by) of required HP iv) One No. Spare feeder required 5 HP Rotary switches for Auto/Manual ON/OFF operations for each unit. Rotary duty selector switches. Panel type voltmeter 150mm with rotary selector switch for reading voltage between phases. Neon phases indicating lights on the incoming mains. Single phase preventor for each motor. CT Operated Relay All internal wiring colour coded from incoming mains to various switchgear, starter, meter, indicating lamp and bus bar. All the cable entry to the panel shall be from the top. (All for above from item (a) to (l) complete set). (The shop drawing to be prepared and approved before fabrication) Total C/O to Summary
2Set-201468
... more
SWIMMING POOL FILTERATION SYSTEM Recirculation Pumps Main Pool + Jacuzzi Area : 550 m2 x 1.2 m Balancing Tank : 60 m3 Total Pool Volume : 660 m3 + 60 m3 = 720 m3 Filtration flow rate : 180 m3/hr Filtration Plant with Pump Supply, instalation, Testing & Commissioning of Bobbin Wound Side Mount Sand Filter manufactured with fiber glass and polyester resin,UV resistance surface,fitted with collector arms and diffuser made from unplasticised PVC and Polypropylene with lid in polyester resin and fibre glass, manual air purge and 4" PVC flanged connection for inlet and outlet, Pressure gauge, water drain/empty drain for filter etc. Complete in all respects. including Corse & Fine Silica Sand media for filter APX. 7200KG Capacity 60000 ltrs/hr Design @ 30000 ltrs/sqm/hr. Diameter 1600 mm Working Pressure 4.0 kg/cm²
3Nos.-321430
... more
Valve Battery Valve Battery Manifold made in PVC with flanges for connecting to filters Consists of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters. Size : 4 inch Supply, instalation, Testing & Commissioning of Self Priming pumps with CI body, in built CI strainer basket, Impeller in CI/bronge, Motor shaft in stainless steel AISI-420, Mechanical seal in SiC - SiC / Carbon - Ceramic, Motor housing in aluminium, with motor -2850rpm, F class insulation, protection IP-55. (3W+1S)
3Nos.-68010
... more
Supply, instalation, Testing & Commissioning of Self Priming pumps with CI body, in built CI strainer basket, Impeller in CI/bronge, Motor shaft in stainless steel AISI-420, Mechanical seal in SiC - SiC / Carbon - Ceramic, Motor housing in aluminium, with motor -2850rpm, F class insulation, protection IP-55. (3W+1S) Capacity 60000 ltrs/hr Head 16 mtr Hp 7.5, Three Phase
4Nos.-93352
... more
Swimming Pool U.V. Sterlizer Supply, instalation, Testing & Commissioning of U.V. Sterlizer with S.S. Housing outside, U.V. Lamp, glass tube and all other accessories with cleaning arrangement, supports, inlet outlet connection with bypass arrangement including S.S. Cabinet with glass door of suitable size to house the U.V. Sterlizer complete with required accessories. Flow rate = 60000 Ltr/Hr working Pressure = 4.0 Kg/Sqm UV Lamp Wattage = 400 W
3Nos.-181321
... more
Dosing Pump Supply, instalation, Testing & Commissioning of Chemical dosing Pump for Chlorination with 200 Ltrs. Sintex tank and Accessories Capacity 0-20 litres/hr. Head 35 M
3Nos.-42669
... more
Stainless Steel Drain Supply, instalation, Testing & Commissioning of Stainless steel drain grating plate made out of 316 quality S S plates with suitable supporting frame and of following sizes and having holes of required size for drainout chamber. Size 400X400 MM
2Nos.-29998
... more
Inlet Nozzle Supply, instalation, Testing & Commissioning of Flow adjastable ABS inlet nozzles UV treated with S.S. screws to fit in the 2" PVC pipes
38Nos.-1726
... more
Suction Inlets (Vacuum points) Supply, instalation, Testing & Commissioning of ABS white plastic suction port / Vacuum nozzle with 2 inch solvent cement connection
4Nos.-1409
... more
Supply, instalation, Testing & Commissioning of Stainless Ladder Steel 316 ladders, width: 500mm wide, handrails dia 43mm stainless steel, non-slip steps provided with anchoring Socket. a)3 Step Standard Ladder with Anti-skid Steps
2Nos.-32453
... more
b)4 Step Standard Ladder with Anti-skid Steps
2Nos.-45124
... more
Underwater LED Lights Supply, instalation, Testing & Commissioning of 12Volt 54 W under water stainless steel 316L LED light fixture ( IP 68) including all required assessories & making connection as required. with 2 Mtr power cord.
16Nos.-26821
... more
Power Supply Supply, instalation, Testing & Commissioning of Transformer for LED Lights 12V DC, 30 amp
2Nos.-12883
... more
Deck Box Supply, instalation, Testing & Commissioning of ABS white plastic deck.
16Nos.-1479
... more
Cleaning Accessories a)Extensive telescopic Handle, (2.4 - 4.8) metres long &1.1mm thick for cleaning attachment in anodized almunium.
1Nos.-4834
... more
b)Transparent Blue Polyethylene hose 40mm(1-1/2") dia 30 m length.
1Nos.-8448
... more
c)Surface net skimmer made in polypropylne
1Nos.-1332
... more
d)Deep bag net Skimmer made in polypropylne
1Nos.-1102
... more
e)Curved polybristle wall brush 450 mm
1Nos.-1026
... more
f)Test kit for PH and chlorine.
1Nos.-995
... more
g)Hi-grade Stainless Steel Algae Brush - 10"
1Nos.-1479
... more
h)Vacuum head with SS-body, 1 1/2" connection size 900 mm long
1Nos.-3380
... more
i)Deluxe large Vacuum head with 4 wheels, alu-body, plastic handle, 1 1/2" connection size 445x130 mm
1Nos.-7941
... more
j)Polybristle wall brush 10" (26cm)
1Nos.-687
... more
k)Chemical TCCA 90 (50 kg.) & ALUM (30 kg.)
1Set-12883
... more
l)nylon rope
100Mtr-275
... more
uPVC pipes Providing and fixing uPVC pressure Pipes (10kg/cm2) with plain socket suitable for solvent cement jointing conforming to IS:4985/2000 & fittings conforming to IS 7834/87. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc. The pipes & fittings shall be tested to a pressure of 10 Kg/Sq.cm. a)32 mm dia
24RM-841
... more
b)50 mm dia
72RM-963
... more
c)63 mm dia
60RM-1071
... more
d)75 mm dia
48RM-1161
... more
e)90 mm dia
72RM-1442
... more
f)110 mm dia
54RM-1750
... more
g)160 mm dia
156RM-2272
... more
h)200 mm dia
72RM-2900
... more
i)250 mm dia
282RM-4437
... more
Ball Valve Providing and fixing Pvc lever operated ball valve of full flow with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 with union, flanges where as required. a)32mm dia
6Nos.-801
... more
40mm dia (Rate only)
---
... more
50mm dia (Rate only)
---
... more
63mm dia
1Nos.-2743
... more
75mm dia (Rate only)
---
... more
90mm dia (Rate only)
---
... more
Butterfly Valve Providing and fixing uPVC butterfly valves. Tested to a pressure not less than 10 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers complete as required. a)90 mm dia
1Nos.-10954
... more
b)110 mm dia
12Nos.-11850
... more
c)160 mm dia
6Nos.-16073
... more
d)200 mm dia
10Nos.-21704
... more
e)250 mm dia
1Nos.-75582
... more
Non return valve Providing and fixing Pvc ball Type Or Spring Loaded Non Return valve with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 with union, flanges where as required. a)50mm dia
1Nos.-3535
... more
b)63mm dia
1Nos.-5080
... more
c)75mm dia
1Nos.-8394
... more
Providing and fixing of uPVC Wafer Check Valve non-return valves (PN 10) complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes. a)75mm dia
1Nos.-3659
... more
b)90 mm dia
1Nos.-4939
... more
c)110 mm dia
2Nos.-5707
... more
d)160 mm dia
6Nos.-6411
... more
e)200 mm dia
3Nos.-7243
... more
f)250 mm dia
1Nos.-16969
... more
Puddles Sleeve Supply & fixing of following sizes of heavy duty PVC puddle flanges (uPVC pipe(10 kg/cm2) fixed with flanges, length 400 to 600 mm length) on the wall of plantroom, balancing tank and the water body walls & Slab (As required). To be laid in between the steel reinforcement before RCC. Does not include any civil work. a)32 mm dia
2Nos.-931
... more
c)50 mm dia
2Nos.-1186
... more
d)63 mm dia
2Nos.-1442
... more
e)75 mm dia
2Nos.-1634
... more
f)90 mm dia
1Nos.-2121
... more
g)110 mm dia
1Nos.-2697
... more
h)160 mm dia
2Nos.-4770
... more
i)200 mm dia
7Nos.-5602
... more
j)250 mm dia
2Nos.-6498
... more
Supply, laying, testing and commissioning of SS 304 Grade 300MM DIA Pump Suction Header with 2 Nos 200mm Dia Flange Connection For Balancing Tank to Pump Suction Header, 1 No. 90 mm Dia Flange Connection For Vacuum Pipe & 1 No. 200 mm Dia Flange Connection For Pool Drain Pipe & 4No. 200mm Dia & 2 No. 160mm DiaFlange Connection For Pump Suction.
1Nos.-136647
... more
Supply, laying, testing and commissioning of SS 304 Grade 200MM DIA Pump Delivery Header with 1 Nos 200mm Dia Flange Connection For Filter Inlet Header, 1 No. 160 mm Dia Flange Connection For Drain Pipe & 4 No. 160mm Dia Flange Connection For Pump Delivery.
1Nos.-106047
... more
Supply, laying, testing and commissioning of following size PVC insulated sheathed copper conductor 1100 V grade unarmoured cable with required size of sleeves complete as required. a)4 x 16 sq.mm
100RM-892
... more
c)4 x 6 sq.mm (Rate only)
---
... more
d)4 x 4 sq.mm (Rate only)
---
... more
e)4 x 2.5 sq.mm
100RM-214
... more
f)4 x 1.5 sq.mm (Rate only)
---
... more
g)3 x 6 sq.mm (Rate only)
---
... more
h)3 x 4 sq.mm
200RM-218
... more
i)3 x 2.5 sq.mm (Rate only)
---
... more
j)3 x 1.5 sq.mm (Rate only)
---
... more
k)2 x 6 sq.mm
200RM-248
... more
l)2 x 4 sq.mm (Rate only)
---
... more
m)2 x 2.5 sq.mm
200RM-138
... more
n)2 x 1.5 sq.mm
100RM-119
... more
Providing and fixing 6 SWG dia G.I. wire on surface or in 6 Gauge GI Wire recess for loop earthing as required.
50RM-57
... more
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a)300 mm width X 50 mm depth X 1.6 mm thickness
18RM-621
... more
b)150 mm width X 50 mm depth X 1.6 mm thickness
24RM-531
... more
Providing & fixing M.S. structural work fabricated from standard section e.g. M.S rounds, angles, channels, plates including cutting to size,drilling,welding fixing and welding to insert plates in RCC structural members as directed by engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps etc.)
300KGS-209
... more
ELECTRICAL CONTROL PANEL Supply, installation, testing and commissioning of following swimming pool panel 415 V, 1 / 3 Phase and 50 Hz power distribution system. The panel shall be free standing floor mounting sheet metal enclosed dust and vermin proof confirming to IP-54, compartmentalized design fabricated out of 16 SWG sheet Steel, painting earthing numbering, danger plate as per specifications and drawings. Flush front with aluminium busbars, seperate earth bus bars to be provided throughout the length of the panel the incoming and outgoing feeder breakers, fuses, indicating lamps etc shall be accomadated in a modular multilier arrangement. The panel shall be powder coated through 9 tank process. Adequate size cable alley shall be provided forcable termination.The outgoing feeders inside shall be connected through bus bars/ flexible cable links. Incoming: One (1) no. 200A TP 25 KA MCCB with thermomagnetic Digital flush mounted 0-200A ammeter with 3 way and OFF selection switch with 3 Nos. 200/5 Amp CT. 1 set (3 Nos. ) of phase indication lamps 200A 25 KA TPN Aluminium bus bar. It shall be insulated with heat shrinkable sleeves and shall be color coded. Outgoing: Recirculation pump Six (6) Nos. Star Delta starter complete with separate single phasing protection feature. ON/OFF indicating lamps, relay, contractors, start/stop push button, auto/manual selector switch, sufficient nos of potential free spare contacts, etc for suitable HP 3 Nos. 6AMP DP MCB of suitable rating with correct thermal range suitable for chemical dosing 3 Nos. Toggle switch for doser 3 Nos. 6AMP DP MCB of suitable rating with correct thermal range suitable for UV 3 Nos. Toggle switch for UV 1 Nos.16AMP DP MCB of suitable rating with correct thermal range suitable for Underwater Lights 1 Nos. Toggle switch for LED Pool Lights Total C/O to Summary
1Set-329065
... more
ENTRY WATER BODYPressure sand filter Supply, instalation, Testing & Commissioning of Bobbin Wound Top Mount Sand Filter manufactured with fiber glass and polyester resin,UV resistance surface,Non Corrosive material, complete with 6-way 2" multiport valve with filter connection / Inter-Connecting Piping, Pressure gauge, water drain/empty drain for filter.including Corse & Fine Sand media for filter as per approved calculation Capacity 15000 ltrs/hr Design @ 35000 ltrs/sqm/hr. Diameter 750 mm
1Nos.-68010
... more
Filter re-circulation pump Supply, instalation, Testing & Commissioning of Self Priming pumps with plastic body, in built strainer basket, Impeller in PPO, Motor shaft in stainless steel AISI-420, Mechanical seal in SIC/graphite and steatite, Motor housing in aluminium, with motor -2800rpm, F class insulation, protection IP-55. (1W+1S) Capacity 15000 ltrs/hr Head 12 mtr Hp 2.0, Three Phase
2Nos.-67377
... more
Fountain re-circulation pump Single stage High speed horizontal centrifugal monobloc with volute type delivery casing pool recirculation Submersible pump, delivery casing & Motor body in CI, Motorshafts in carbon steel, impeller in CI with motor HP 7.5, Three Phase
2Nos.-55339
... more
Single stage High speed horizontal centrifugal monobloc with volute type delivery casing pool recirculation Submersible pump, delivery casing & Motor body in CI, Motorshafts in carbon steel, impeller in CI with motor HP 2.0, Single Phase
1Nos.-29998
... more
Swimming Pool U.V. Sterlizer Supply, instalation, Testing & Commissioning of U.V. Sterlizer with S.S. Housing outside, U.V. Lamp, glass tube and all other accessories with cleaning arrangement, supports, inlet outlet connection with bypass arrangement including S.S. Cabinet with glass door of suitable size to house the U.V. Sterlizer complete with required accessories. Flow rate = 20000 Ltr/Hr working Pressure = 2.5 Kg/Sqm UV Lamp Wattage = 40 W
1Nos.-49961
... more
Chlorine Tablet Feeder Supply, instalation, Testing & Commissioning of Chlorine tablet Feeder with Accessories Capacity = 4.5 Kg
1Nos.-17327
... more
Stainless Steel Drain Supply, instalation, Testing & Commissioning of Stainless steel drain grating plate made out of 316 quality S S plates with suitable supporting frame and of following sizes and having holes of required size for drainout chamber. Size 200X200 MM
1Nos.-15426
... more
Fountain Nozzle Supply, instalation, Testing & Commissioning of Brass crome plated GyserJet Nozzle with 1" connection with required accessories.
24Nos.-8457
... more
Suction Inlets (Vacuum points) Supply, instalation, Testing & Commissioning of ABS white plastic suction port / Vacuum nozzle with 2 inch solvent cement connection
1Nos.-5270
... more
Supply of 12Volt 12W under water stainless steel 316 Ring Underwater LED Lights Type LED Warm White Light ( IP 68) including all required assessories & making connection as required. with 2 Mtr power cord. For fountain nozzle
25Nos.-25554
... more
Power Supply Supply, instalation, Testing & Commissioning of Transformer for LED Lights 12V DC, 30 amp
1Nos.-12883
... more
Supply, instalation, Testing & Commissioning of RGB Programmer for LED Lights.
1Nos.-25554
... more
Deck Box Supply, instalation, Testing & Commissioning of ABS white plastic deck.
4Nos.-1479
... more
uPVC pipes Providing and fixing uPVC pressure Pipes (10kg/cm2) with plain socket suitable for solvent cement jointing conforming to IS:4985/2000 & fittings conforming to IS 7834/87. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc. The pipes & fittings shall be tested to a pressure of 10 Kg/Sq.cm. a)32 mm dia
12RM-841
... more
50 mm dia
18RM-963
... more
63 mm dia
40RM-1071
... more
75 mm dia
6RM-1161
... more
90 mm dia
42RM-1442
... more
110 mm dia
60RM-1750
... more
160 mm dia (Rate only)
---
... more
200 mm dia (Rate only)
---
... more
Ball Valve Providing and fixing Pvc lever operated ball valve of full flow with setting and gland of superior quality having minimum Ball working pressure of 10 kg/cm2 with union, flanges where as required. a)32mm dia (Rate only)
---
... more
40mm dia (Rate only)
---
... more
50mm dia
4Nos.-1804
... more
63mm dia
9Nos.-2743
... more
75mm dia
3Nos.-7118
... more
90mm dia (Rate only)
---
... more
Butterfly Valve Providing and fixing uPVC butterfly valves. Tested to a pressure not less than 10 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers complete as required. a)90 mm dia (Rate only)
---
... more
110mm dia
1Nos.-11850
... more
160 mm dia (Rate only)
---
... more
200 mm dia (Rate only)
---
... more
Non return valve Providing and fixing Pvc ball Type Or Spring Loaded Non Return valve with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 with union, flanges where as required. 50mm dia (Rate only)
---
... more
63mm dia
3Nos.-5080
... more
75mm dia
1Nos.-8394
... more
Providing and fixing of uPVC Wafer Check Valve non-return valves (PN 10) complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes. a)75mm dia (Rate only)
---
... more
90 mm dia
1Nos.-4939
... more
110 mm dia
1Nos.-5707
... more
Puddles Sleeve Supply & fixing of following sizes of heavy duty PVC puddle flanges (uPVC pipe(10 kg/cm2) fixed with flanges, length 400 to 600 mm length) on the wall of plantroom, balancing tank and the water body walls & Slab (As required). To be laid in between the steel reinforcement before RCC. Does not include any civil work. a)32 mm dia (Rate only)
---
... more
50mm dia (Rate only)
---
... more
Supply, laying, testing and commissioning of SS 304 Grade 200MM DIA Pump Delivery Header with 1 Nos 200mm Dia Flange Connection For Filter Inlet Header, 1 No. 160 mm Dia Flange Connection For Drain Pipe & 4 No. 160mm Dia Flange Connection For Pump Delivery.
1Nos.-106623
... more
Supply, laying, testing and commissioning of following size PVC insulated sheathed copper conductor 1100 V grade unarmoured cable with required size of sleeves complete as required. a)4 x 16 sq.mm
50RM-892
... more
4 x 2.5 sq.mm
50RM-214
... more
3 x 4 sq.mm
100RM-218
... more
2 x 6 sq.mm
100RM-248
... more
2 x 4 sq.mm (Rate only)
---
... more
2 x 1.5 sq.mm
100RM-119
... more
Providing & fixing M.S. structural work fabricated from standard section e.g. M.S rounds, angles, channels, plates including cutting to size,drilling,welding fixing and welding to insert plates in RCC structural members as directed by engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps etc.)
150Kg-209
... more
ELECTRICAL CONTROL PANEL Supply, installation, testing and commissioning of 415 V, 1 / 3 Phase and 50 Hz motor. The switchboard cubical indoor type made of 16 SWG CRCA Sheet Painted with powder coated paint of Siemens grey shade. The cubical is wall mounted with dust & vermin Proof construction with inter connection. It comprise with the following: a)One incoming mains of 63 Amps. MCCB – TP, Schneider b)One no. 0 – 600 V Digital Voltmeter, mecon make 96 Sq.mm with voltage selector switch. make. c)Three phase LED type indicating lights for incoming mains. d)One no. CT operated 0 – 60/5 A Digital Ammeter, mecon e)Two no. Star Delta starter Schneider make with ON/OFF push button and ON/OFF indication light f)Two no. Star Delta starter Schneider make with ON/OFF push button and ON/OFF indication light g)Four no. Auto/Manual selector switches, Salzer make h)One no. MCB DP 6 Amps. for U/V system, Schneider make. i)One no. Toggle switch for U/V system, HSD make. j)One no. MCB SP 6 Amps. for SMPS DC Power Supply for LED light, Schneider make. k)One no. Toggle switch for LED Pool Lights, HSD make.Total C/O to Summary
1Set-181321
... more
POND AERATION Supply, instalation, Testing & Commissioning of surface aerating fountain with pump, float, spray/fountain nozzle,conrtol, lights and cable, pump capacity 1-3 hp The aerator shall be a floating
4NOS-353107
... more
Supply, instalation, Testing & Commissioning of surface aerating fountain with pump, float, spray/fountain nozzle,conrtol, lights and cable, pump capacity 5-7.5 hp The aerator shall be a floating
4NOS-473481
... more
Supply, instalation, Testing & Commissioning of surface aerating fountain with pump, float, spray/fountain nozzle,conrtol, lights and cable, pump capacity 10 hp The aerator shall be a floating
4NOS-543171
... more
Supply, instalation, Testing & Commissioning of surface aerating fountain with pump, float, spray/fountain nozzle,conrtol, lights ss frame and cable, pump capacity 10 hp The aerator shall be a floating
2NOS-606526
... more
Miscellaneous item (hanging wire etc) Total C/O to Summary
2lot-258075
... more
GOLF COURSE WATER BODIES/PONDS STP WATER SUPPLY: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : a)25 to 40 mm nominal bore
1each-673.45
... more
b)50 to 80 mm nominal bore
1each-1432.75
... more
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
1each-606.55
... more
BRASS FITTINGS Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a)25 mm nominal bore
10each-497.15
... more
b)20 mm nominal bore
15each-460.2
... more
c)32 mm nominal bore.
12each-581.25
... more
d)40 mm nominal bore
10each-678.4
... more
e)50 mm nominal bore
25each-869.2
... more
f)65 mm nominal bore
35each-1488.1
... more
g)80 mm nominal bore
10each-2217.9
... more
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : a)15 mm nominal bore
250each-338.7
... more
b)20 mm nominal bore
150each-386.4
... more
c) 25 mm nominal bore
35each-394
... more
Providing and fixing gun metal non- return valve of approved quality (screwed end) : a)25 mm nominal bore Horizontal
10each-477.7
... more
Vertical
5each-504.45
... more
b) 32 mm nominal bore Horizontal
15each-641.75
... more
Vertical
2each-708.65
... more
c)40 mm nominal bore Horizontal
6each-792.4
... more
Vertical
2each-979.7
... more
d)50 mm nominal bore Horizontal
10each-1144.05
... more
Vertical
2each-1251.1
... more
e)65 mm nominal bore Horizontal
2each-2043.95
... more
Vertical
1each-2057.35
... more
f)80 mm nominal bore Horizontal
1each-2890.7
... more
Vertical
1each-3399.1
... more
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore
1each-295.15
... more
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore
1each-340.35
... more
25 mm nominal bore
1each-438.35
... more
C.I./DUCTILE IRON PIPES & SPECIALS Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class): a)Up to 300 mm dia
2quintal-5320.4
... more
b)Over 300 mm dia
1quintal-5454.2
... more
Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : a)Up to 300 mm dia
1quintal-7862.5
... more
b)Over 300 mm dia
1quintal-7862.5
... more
Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : a)100 mm dia pipe
10metre-1201.95
... more
b)125 mm dia pipe
10metre-1499.8
... more
c)150 mm dia pipe
3500metre-1810.75
... more
d)200 mm dia pipe
600metre-3062.75
... more
e)250 mm dia pipe
300metre-4002
... more
Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : a)100 mm diameter pipe
2each-374.8
... more
b)125 mm diameter pipe
2each-556.65
... more
c)150 mm diameter pipe
585each-562.7
... more
d)200 mm diameter pipe
100each-747.65
... more
e)250 mm diameter pipe
50each-934.5
... more
Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : a)100 mm diameter pipe
2each-265
... more
b)125 mm diameter pipe
2each-278.35
... more
c)150 mm diameter pipe
585each-327.4
... more
d)200 mm diameter pipe
100each-355.5
... more
e)250 mm diameter pipe
50each-484.7
... more
C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : a)100 mm diameter Class I
1each-3977.6
... more
Class II
1each-4426.05
... more
b)150 mm diameter Class I
6each-5836.6
... more
Class II
2each-6442.35
... more
200 mm diameter Class I
4each-11357.75
... more
Class II
1each-13376.85
... more
250 mm diameter Class I
1each-16566.4
... more
Class II
1each-21527.85
... more
300 mm diameter Class I
1each-22942.1
... more
Class II
1each-26861.85
... more
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
6each-9288.4
... more
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (Rate only)
---
... more
Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2each-22363.2
... more
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (Rate only)
---
... more
AIR VALVE & WATER METER (BULK TYPE): Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50 mm dia
1each-5157
... more
80 mm dia
1each-6240.7
... more
100 mm dia
2each-8193.1
... more
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 150 mm dia nominal bore
1each-7725.8
... more
200 mm dia nominal bore
1each-8429.55
... more
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm dia
1each-4097.9
... more
100 mm dia
1each-6585.5
... more
150 mm dia
1each-8345.25
... more
200 mm dia
2each-11644.65
... more
Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 : Up to 300 mm dia
1quintal-11971.3
... more
Filter feed Pump : Providing and fixing vertical, inline multistage centrifugal pumping set (Complete manufactured Skid-Mounted arrangement with manifold and accessories) with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with pressure gauge and with gunmetal isolation cocks, vibration elimination pads etc. complete with base and frame, nuts and bolts and necessary RCC foundations as per requirement as per instructions and pump shall have following duty: A).No. of Pumps : 3(2 Working + 1 Standby ) B).Capacity : 2000 LPM C).Head : 35 M D).Capacity : 2000 LPM E).HP (Motors) : 75 HP
3Each-365778
... more
Pressure Filter (Domestic Water): Providing and fixing vertical Dual Media Pressure Filter (comprising of minimum 300mm bed depth of Anthracite and support media and minimum Height on Straight 2500mm) fabricated from high performance M.S plate of minimum 10mm thick for shell & 12mm thick for dished ends (Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8) internally treated with coal-tar epoxy, complete with air scouring, collection system complete with initial charge of media, M.S face piping, valves, accessories, external painting with 2 coats of red oxide primer and enamel paint, testing and commissioning complete. (Tested to 5.0 Kg/m2) A).Discharge : App.120000 lph (each) B).Filtration Rate : 24,500 lit./m2/h C).Each Suggested dia app. : As per Manifacture detail
2Each-739571
... more
Water Softener: Providing and fixing ‘Cation’ ION exchange water softener fabricated from minimum 10mm thick M.S. plate on min. shell and 12mm thick M.S. plate on dished ends (Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8) complete with initial charge of filter media and ION exchange resins, face piping accessories, diaphragm valves of approved specifications, HDPE Brine tank of min. 500 Liters, piping testing and commissioning complete with resins of approved quality and make and regeneration assembly complete with valves, ejector, brine suction valves and piping. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration). All internal parts of the softener shall be rubber lined as per approved specifications. A).Minimum expected rate of flow: App.32,000 lph B).Total soft water to be produced between two regenerations: app. 256 Cu.m C).Expected raw water hardness : app. 450-500 ppm D).Expected treated water hardness: less than 5 ppm (Zero Commercial Hardness) E).Max. working pressure : 4 Kg/cm2
2Each-954977
... more
CUBICAL PANEL BOARD - PLUMBING : Supply, installation, testing and commissioning of Cubical type sectionalised floor standing switch board of 31 MVA fault capacity at 415 V complete with 3.5 strip, 160 A capacity Aluminium Bus - Bar Electrolytic grade, cable alley, switchgears of following capacity & as per specifications. INCOMER : 600 A TP MCCB with heavy duty solid neutral link with (0-100A) ammeter with 3 CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection fuse. - 01 Set OUTGOINGS : i) For 5 x 75 HP Domestic Water fixed speed hydroneumatic Pumps (1 duty + 1 stand by) II) For 2 x 5 HP sump Pump (1 Duty + 1 Stand by) 150 A TP MCB with 40 A DOL starter, overload relay, 96 mm (0-40A) ammeter with single CT, start / stop push buttons, on / off / trip indication lights with protection fuse, single phase preventer. - 01 set. 40A TP MCB with 25 A DOL starter, overload relay, 96 mm (0-25A) ammeter with single CT, start / stop push buttons, on / off / trip indication lights with protection fuse, single phase preventer. - 01 set.
1Each-384784
Total Amount ₹ 3.4 Cr
Quoted Amount
Calculate Bid Estimation
-5
×
%
₹ 3.2 Cr
Evaluation Notes How It Works ?

Result

No Result Available
Click here to view all tender results of this authority
Business Providers

No Business Providers available

Business Seekers

No Business Seekers available

https://bidassist.com/pricing/1?referer=Banners
7 DAY
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
whatsapp chat