New Okhla Industrial Development Authority Tender

... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

New Okhla Industrial Development Authority Tender

Works
Civil And Construction
Drainage Work
Eprocure
Opening Date7 Feb 2025
Closing Date20 Feb 2025
Tender Amount₹ 2,48,03,688 
Notes
Download

AI Insights

Bid Capacity
... View More
To determine the bid capacity required, we look at specific eligibility criteria. 1. Solvency: 40% of the total estimated cost equals 9921500.00 Rs, to be issued within a minimum of six months. 2. Experience: The bidder must have completed works in the last 7 years, with requirements including: - Three similar completed works, each costing not less than 40% of the estimated cost (9921500.00 Rs). - Or, two similar completed works, each costing not less than 60% of the estimated cost (14882300.00 Rs). - Or, one similar completed work costing not less than 80% of the estimated cost (19843000.00 Rs). 3. Turnover: The average annual financial turnover should be at least 30% of the estimated cost (7937500.00 Rs) for the last 3 consecutive financial years. Given these, the bid capacity can be summarized as: - Solvency: 0.4 * total estimated cost = 9921500.00 Rs - Experience: - Three works at 40% of estimated cost = 29764500.00 Rs - Or, two works at 60% of estimated cost = 29764600.00 Rs - Or, one work at 80% of estimated cost = 19843000.00 Rs - Turnover: Average annual turnover of at least 30% of estimated cost for 3 consecutive years = 7937500.00 Rs per year. The bid capacity required includes specific financial and technical capabilities, outlined by solvency, experience, and turnover requirements. However, a direct bid capacity formula or value beyond these requirements is not specified. The Earnest Money Deposit (EMD) value is mentioned as Rs 4,96,100.00, and there are formulas for calculating rates for altered, additional, or substituted work, but these do not directly equate to a "bid capacity" formula. Given the details, the bid capacity is outlined through solvency, experience, and turnover, but a specific formula or value directly labeled as "bid capacity" is not found.
Technical Capacity
... View More
The required prior work experience for the bidder includes completing similar works during the last 7 years. The bidder must have completed works with a value of at least 40% of the estimated cost put to tender, which is Rs. 9921500.00. The specific requirements are: - Three similar completed works each costing not less than Rs. 9921500.00 (40% of the estimated cost). - Alternatively, two similar completed works each costing not less than Rs. 14882300.00 (60% of the estimated cost). - Alternatively, one similar completed work costing not less than Rs. 19843000.00 (80% of the estimated cost). Additionally, for work experience of more than Rs 10 Lakh, the bidder should have successfully completed works during the last 7 years with Govt./Semi Govt./PSU only, meeting the experience qualification in one of the following ways: - Three similar completed works costing not less than the amount equal to 40% of estimated cost put to tender, - Two similar completed works costing not less than the amount equal to 60% of estimated cost put to tender, - One similar completed work of aggregate cost not less than the amount equal to 80% of estimated cost put to tender. Note that experience qualification will not be mandatory for work up to Rs 10.00 Lakh.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
3.0 to 4.50 m depth

122

37

4549.38

... More
4.50 to 6.00 m depth

79

55

4418.47

... More
6.00 to 7.50 m depth

50

74

3729

... More
7.50 to 10.00 m depth

30

93

2796.6

... More
Cemnet concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, Tools & plants etc. required for proper completion of the work.

10

6867

68676

... More
M-150 brick work in 1:4 one Cement & four Coarse Sand of 2.20 FM mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

72

5841

420552

... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

18

214

3858.12

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

7

9964

69750.8

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars

824

76

63217.28

... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

80

208

16687.2

... More
15 mm cement plaster on rough side of Single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

140

227

31865.4

... More
Neat cement punning

200.18

46

9242.08

... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layers by ramming, watering, etc. and disposing of suplus excavated soil as directed, within a lead of 50m. All kinds of soil. As per circular approved by Noida Authority.

-

-

-

... More
a) Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.

2250

216

487507.5

... More
Demolishing cement concrete manually/by mechanical means i/c disposal of material within 50 meters lead as per direction of E/I of nominal concrete 1:3:6 or richer mix.(i/c equivalent design mix).

90

1089

98067.6

... More
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.

-

-

-

... More
(a) Bituminous portion

450

3083

1387683

... More
(b) Water bound macadam

675

1770

1195188.75

... More
Supply and installation of required size steel pipe 10 mm thick confirming to IS:3589 through trenchless excavation of thrust pit and receiving pit of required size and the excavation & filling back & complaction complete as per specification for road crossing by AUGOR/HDD/TBM boring method. pipe will be installed at depth beyond 3m below the ground surface in downward required slope.

-

-

-

... More
300 mm dia MS pipe

150

12690

1903500

... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :

-

-

-

... More
a) 300 mm dia Ductile Iron Class K-9 pipes

2250

5914

13307062.5

... More
P/F of M.S. special such as tee, bends, collars , Tapers, Gap pieces , including flange ends as required , painting, cutting , welding as per site requirement of MS pipe thickness etc complete in all respect as per direction of E/I

9934

75

746043.4

... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

877

109

96241.98

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

2597

108

282969.12

... More
Constructing masonry Chamber 120 x 120 x 100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter,160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size) ,i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 100.

2

20167

40335.44

... More
P/F Sluice valve Shall generally comform to IS 14846 with latest amendment , with length over flanges as per PD of IS 14846 corresponding to BS EN-558 / ISO 5752 Basic Series 3 in CI Construction having metal seating (IS 318 Gr. LTB 2) with complete Component & Material of construction following below.

-

-

-

... More
1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG 260 2 - Spindle - Non rising ; Stainless Steel AISI 410 3 - Body seat / Door face - Gun metal IS 318 Gr. LTB 2 (rings to be prss fitted and riveted, no screw allowed) 4 - Rivets - Soft annealed brass 5 - Spindle Nut - Gun metal IS 318 Gr. LTB 2 6 - Stem seal - Greased Hemp 7 - Fasteners - Carbon steel 8 - Flange Drilling - IS 1538 Table 4 & 6 9 - PN 1.0

-

-

-

... More
10 - Accessories (400 mm and above) - Ball thrust bearings to be housed above the wet chamber ie above the gland.Enclosed spur Gear Box for ease of operation. Air Plug. 11 - Painting / Coating - Inside & Outside epoxy liquid coated ; DFT minimum 250 micron, shade RAL 5005 /5015 (BLUE) 12 - HYDRO - test - (Open ended only) seat : 10 / 16 Kg/Cm2; Body : 15 / 24 Kg/cm2 13 - Upto 600 mm dia Manual Operated & above 600 mm Gear Box Make- Indian valve Pvt. Ltd. (IVC)/ Kirloskar Brothers Limited (KIRLOSKAR)

-

-

-

... More
300 mm dia Kirloskar make

2

78362

156725.2

... More
P/F Reflex valve upto 600 mm dia. Shall conform to IS 5312 Part 1 & above to IS 5312 Part-2 with latest amendment , Valves shall be in graded CI with metal tometal (IS 318 Gr.LTB 2) seating , preferably slanted (and not perpendicular) vis-à-vis horizontal axis, SS AISI 410 stub pins & slant seat disign with complete component & material of construction followings below:-

-

-

-

... More
1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG 260 2 - Hinge pin (Single door)/Stub pin (multidoor type) - SS AISI 410 3 - seat & Face rings - Gun metal: IS 318 Gr. LTB 2 4 - Rivets - Soft annealed brass 5 - Fasteners - Carbon steel 6 - Flange Drilling - IS 1538 Table 4 & 6 7 - PN 1.0 8 - By - pass arranvement - Optional 9 - Painting / Coating - Inside & Outside epoxy liquid coated ; DFT minimum 250 micron, shade RAL 5005 /5015 (BLUE) 10 - HYDRO - test - (Open ended only) seat : 10 / 16 Kg/Cm2; Body : 15 / 24 Kg/cm2 Make- Indian valve Pvt. Ltd. (IVC)/ Kirloskar Brothers Limited (KIRLOSKAR)

-

-

-

... More
300 mm dia Kirloskar make

2

61284

122568.2

... More
SUPPLY, ERECTION, TESTING AND COMMISSIONING OF NON CLOG SEWAGE SUBMERSIBLE PUMP SET COMPLETE IN ALL RESPECT AS PER DIRECTION OF ENGINEER IN-CHARGE. TECHNICAL SPECIFICATION OF PUMP SET SHALL BE AS GIVEN BELOW. (1) MOTOR TYPE:- SQ. CAGE INDUCTION MOTOR 960 RPM SUITABLE FOR OPERATION ON 400/440 VOLTS 3 PHASE, 50 HZ AC SUPPLY WITH F CLASS INSULATION & IP-68 PROTECTION. 2) PUMP:- (A) BODY: - CAST IRON WITH 2% NICKEL (B) IMPELLER:- CF8M(SS316) (C) SHAFT:- STAINLESS STEEL (SS304) (D) AUTO COUPLING STAND:-CF8M (SS316) (E) GUIDE PIPE:-STAINLESS STEEL (SS304) @16 MTR (F) LIFTING CHAIN: - ALLOY STEEL @16 MTR (G) MECHANICAL SEAL: - UPPER SEAL (CARBON/CHROME STEEL). LOWER SEAL (SILICON CARBIDE). (3) FIELD REQUIREMENT:- (A) TYPE: - NON CLOG SEWAGE SUBMERSIBLE PUMP (C) RPM: - 960 (D) HEAD: - 28 MTR (E) COPPER CABLE FOR SEWAGE SUBMERSIBLE PUMP SUITABLE SIZE @ 25 MTR (F) SPECIFIC GRAVITY OF SEWAGE: - 1.07 (G) SOLID HANDLING CAPACITY (DIA) ;- NOT LESS THAN 100 MM Note- CONTRACTOR SHALL BE SUBMITTED G.T.P & ALL COMPANY TEST CERTIFICATE OF THE MATERIAL USED IN PUMP SET. (Make- PULLEN PUMP INDUSTRIES PVT LTD / M/S AQUA MACHINERIES PVT. LTD. /M/S KISHOR PUMPS PVT. LTD. )

-

-

-

... More
Non Clog Sewage Submersible pump set discharge 612 m³/hr., Head:- 28 mtr, Rating 90/120, Outlet size of pipe 200 mm dia, Cable 2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

1

1441017

1441017.7

... More
Non Clog Sewage Submersible pump set discharge 432 m³/hr., Head:- 28 mtr, Rating 60/80, Outlet size of pipe 200 mm dia, Cable 2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

1

1087296

1087296.4

... More
S/F of Submersible Motor Cable (Make-Tridev Electricals/Uttam Engineering Works/Sweta Electricals/Hitech) capacity 120 HP to 150 HP {2 x (50 sqmm x 4 core) + 1 x (1.5 sqmm 4 core)}

50

5459

272978

... More
S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

2

16567

33134.4

... More
Supply and fixing of fully automatic auto-transformer Control Panel for clear water pump sets with following features No-volt, Under-voltage, Over -voltage protection, Electronic overload protection, seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps as per directions of E/I.(Make = Contractor : L&T / MCCB : L&T /VPD & MPD : Softhard / Water Level Cum Seal Monitor : PumpCare & Kishor Pumps / Control Transformer & Power Transformer : Elect Care / Timer : L&T / WTR Relay : Minilec.) 100 HP

2

229881

459762

... More
S/E testing & commissioning of 100 K.V.A. Aluminium wound outdoor type transformer as per ISS. Including fees Complete in all respects Make:- P.M./ Kanohar/ LD Power/ Paramix as per direction of E/I.

1

136710

136710

... More
Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) nsulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 120 sq. mm x 3 Core

200

1746

349280

... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 120 sqmm x 3-1/2 Core

100

972

97232

... More
S/F of 11 KV TPMO Relco/Azad/Rama make 9 nos. insulator of Jai shree/BHEL/Rama /Rastriya make complete in all respects as per direction of E/I.

2

18292

36584

... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the EngineerIncharge. 240 Sqmm

-

-

-

... More
a) 120 sqmm.

30

138

4141.8

... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 120 Sqmm

2

8947

17894

... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 120 Sqmm

2

15001

30002

... More
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing

1

6313

6313

... More
S/F of 11 KV pin 12 " long with insulator of Jay Shri make fixed on cross arm on HT pole I/c all T&P.

4

196

784

... More
S/F of 11 KV disc insulater 70 KN and fitting B & S heavy duty with clamp of cros arm fixed on HT poles

4

315

1260

... More
S/L of 25x3mm GI strip from each electrode directly in the ground complete in all respect.

50

106

5310

... More
ST/Joist Girder Pole 11 Metre.

4

15049

60196

... More
S/F of Recess mounting round celling cutout 160 mm height 15 to 18 Watt LED down lighter having powder coated die cast aluminium housing with heat sink diffuser reflector & driver set complete in all respect. Cat-AAA

4

2206

8826.4

... More
S/F of Recess/Surface/Pendent mounting round 24 to 32 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. Cat-AAA

1

4130

4130

... More
S/E of straight MS channel TOP 100x5 x 2240mm (9.2 Kg.) 2.50 m.long as per direction of E/I.

4

826

3304

... More
S/F Clamp with bolts and nut in MS channel.

4

304

1216

... More
Hiring of Gas cutting set with oxygen and LPG running time @ 6 Hrs.

10

1875

18750

... More
Hiring of welding set runnign time @ 6 Hrs.

10

1650

16500

... More
DG Set/Generator 50 KVA

60

728

43698



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.