New Okhla Industrial Development Authority Tender

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. (0.00 to 1.50 Mtr.)

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil (1.50 to 3.00 Mtr.)

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil (3.00 to 4.50 Mtr.)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil , The Contractor has to detect different utilities like sewer line, water supply line, Electric cable, Telephone cable, Gas Pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer in Charge All kinds of soil. Pipes, cables etc. Exceeding 80 mm dia. but not exceeding 300 mm dia.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil , The Contractor has to detect different utilities like sewer line, water supply line, Electric cable, Telephone cable, Gas Pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer in Charge All kinds of soil. Pipes, cables etc. Exceeding 300 mm dia. but not exceeding 600 mm dia.

Supply and installation of required size steel pipe 10 mm thick confirming to IS:3589 through trenchless excavation of thrust pit and receiving pit of required size and the excavation & filling back & compaction complete as per specification for road crossing by Augor boring method. Pipe will be installed at depth beyond 3 below the ground surface in downward required slope. 350 mm dia

Supply and installation of required size steel pipe 8 mm thick confirming to IS:3589 through trenchless excavation of thrust pit and receiving pit of required size and the excavation & filling back & compaction complete as per specification for road crossing by Augor boring method. Pipe will be installed at depth beyond 3 below the ground surface in downward required slope. 200 mm dia

Supply and installation of required size steel pipe 8 mm thick confirming to IS:3589 through trenchless excavation of thrust pit and receiving pit of required size and the excavation & filling back & compaction complete as per specification for road crossing by Augor boring method. Pipe will be installed at depth beyond 3 below the ground surface in downward required slope. 250 mm dia

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS 8329 : 2000 350 mm dia Ductile Iron Class K-7 pipes

P/L following size of Finolex makes PVC pipes 10Kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to length and making joints i/c cost of socket, plstochem PV-85 pvc solvent cement complete. PVC Pipe must be confirming to IS : 4985-2000 with latest amendment. Make- Finolex Industries Ltd./Kisan/ SupremeIndustries Ltd (Rate As Per Comparative Statement per Rm.) 160 mm dia with coupler @ 10 Kgf/Cm2 Pressure with i/c all PVC standerd Specials 200 mm dia with coupler @ 10 Kgf/Cm2 Pressure with i/c all PVC standerd Specials

P/L following size of Finolex makes PVC pipes 10Kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to length and making joints i/c cost of socket, plstochem PV-85 pvc solvent cement complete. PVC Pipe must be confirming to IS : 4985-2000 with latest amendment. Make- Finolex Industries Ltd./Kisan/ SupremeIndustries Ltd (Rate As Per Comparative Statement per Rm.) 160 mm dia with coupler @ 10 Kgf/Cm2 Pressure with i/c all PVC standerd Specials 250 mm dia with coupler @ 10 Kgf/Cm2 Pressure with i/c all PVC standerd Specials

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

Cement Concrete with 2 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Cold twisted bars

M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.Same as item no. 305 but in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar. As in item 309 above but for walls of one brick thick, add for extra labour to the rate of item no. 309.

12 mm cement plaster of mix : 1:4 ( 1 cement : 4 coarse sand)

Providing and fixing C.l. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) 50 mm dia

Providing and fixing C.l. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) 100 mm dia

P/F M.S. specials such as Tee , Bends , Collars , Tapers, Gap pieces,including Flange Ends as required , Painting ,Cutting, welding as per site requirement of MS pipe thickness etc complete in all respect as per direction of E/I.

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100

P/F Reflex Valves upto 600 mm dia. shall conform to IS 5312 Part 1 & above to IS 5312 Part-2 with latest amendment , Valves shall be in graded CI with metal to metal (IS 318 Gr. LTB 2) seating, preferably slanted (and not perpendicular) vis-à-vis horizontal axis; SS AISI 410 stub pins & slant seat design. with complete Component & Material of construction following below :- 1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG 260 2 - Hinge pin (single door ) / Stub pin (multidoor type ) - SS AISI 410 3 - Seat & Face rings - Gun metal : IS 318 Gr. LTB 2 4 - Rivets - Soft annealed brass 5 - Fasteners - Carbon steel 6 - Flange Drilling - IS 1538 Table 4 7 - PN - 1.0 8 - By – pass arrangement - Optional 9 - Painting / Coating Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE) 10 - Hydro-test Seat: 10 / 16 Kg/cm2; Body: 15 / 24 Kg/cm2 Make- Indian Valve Pvt. Ltd. (IVC) / Kirloskar Brothers Limited (KIRLOSKAR) 150 MM dia

Same as item No. 26 above for Reflex valve of 300 mm dia

P/F Sluice Valve shall generally conform to IS 14846 with latest amendment , with length over flanges as per PD of IS 14846 corresponding to BS EN – 558 / ISO 5752 Basic Series 3 in CI construction having metal seating (IS 318 Gr. LTB 2) with complete Component & Material of construction as following below :- 1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG 260, 2 - Spindle - Non rising; Stainless Steel AISI 410, 3 - Body seat / Door face - Gun metal: IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed), 4 - Rivets - Soft annealed brass, 5- Spindle Nut - Gun metal: IS 318 Gr. LTB 2, 6 - Stem seal - Greased Hemp, 7 - Fasteners - Carbon steel, 8 - Flange Drilling - IS 1538 Table 4 & 6, 9 - PN- 1.0 10 - Accessories (400 mm and above) - Ball thrust bearings to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug, 11 - Painting / Coating - Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE), 12 - Hydro-test - (Open Ended only) Seat: 10 / 16 Kg/cm2; Body: 15 / 24 Kg/cm2 13 -Upto 600 mm dia Manual Operated & above 600 mm Gear box Make- Indian Valve Pvt. Ltd. (IVC) / Kirloskar Brothers Limited (KIRLOSKAR) 250 mm dia

Same as item No. 27 above for sluice valve of 300 mm dia

Same as item No. 27 above for sluice valve of 400 mm dia

Same as item No. 27 above for sluice valve of 500 mm dia

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supply, Erection, Testing and Commissioning of Non Clog Sewage Submersible pump set complete in all respect as per direction of engineer in-charge. Technical specification of pump set shall be as given below. 1. Motor type:- Sq. cage induction motor 960 rpm suitable for operation on 400/440 volts 3 phase, 50 hz AC supply with F class insulation & IP-68 protection. 2. Pump:- a) Body - cast iron with 2% nickel b) Impeller- cf8m(ss316) c) Shaft- stainless steel (ss304) d) Auto coupling stand-cf8m (ss316) e) Guide pipe- Stainless steel (ss304) @16 mtr f) Lifting chain - alloy steel @16 mtr g) Mechanical seal- Upper seal (carbon/chrome steel) & Lower seal (silicon carbide). 3. Field requirement:- a) Type: non clog sewage submersible pump b) Impeller Suction Type : End suction c) RPM: 960 d) Head: 28 mtr e) Copper cable for sewage submersible pump @ 25mtr f) Specific gravity of sewage:1.07 g) Solid handling capacity (dia) not less than 100 mm. Note-Contractor shall be submitted G.T.P. & all company test certificate of the material used in pump set. (Make- Pullen pump industries Pvt ltd / Aqua Machineries pvt. ltd. /Kishor pumps Pvt. ltd. ) Non Clog Sewage Submersible Pump set discharge 432 m³/hr., Head - 28 mtr, Rating 60/80, Outlet size of pipe 200 mm dia, Cable- 2 x50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

Supply and laying aluminum conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 185 sq. mm 3-1/2 core

Same as item No. 30 above but for 120 sq. mm 3-1/2 core

Supply & Fixing of Fully Automatic Control Panel Starter Including Controlling Instrument & Febricating works Pannel Board ie ASS, VSS, CTs Protection, Indicating Lamps, Fiber sheet , Aluminium Busbar, Suitable Control & Power wiring 1.5 sqmm to 25sqmm Thimble, Ferrules etc. and 14 SWG Cubical panel board with power coating paint , Auto transformer for suitable power MNX 225 Ampere Contactor L&T Make -3Nos, 250 Amp. MCB TPN L&T Make -1Nos, Timer L&T Make -2Nos, VPD & MPD soft-hard Make, WLC/Seal Monitor Pump care/Kishore Make-01No., Temp. Relay Control Tranformer Electra care/ Pioneer Make, Winding Temp Relay Make Minilec Suitable Auto Transformer etc as per direction of Engineer-in-charge as per approved Desgin & Drawing suitable for 100 to 150 HP motor.