New Okhla Industrial Development Authority Tender

P/L following size of Finolex makes PVC Pipe 6kg/Cm2 with required PVC standered special confirming to IS codes with latest amendmant and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to length and making joints i/c cost of socket, plstochem PV-85 pvc solvent cement complete, PVC pipe must be confirming to IS : 4985-2000 with latest amendment. Make-Finolax industries Ltd,/Kisan/ Supreme industries Ltd (Rate per Comparative Statement per Rm.) ...3.01) 110 mm dia with coupler @ 6kgf/Cm2 Pressure wit i/c all PVC standered Specials.

140 mm dia with coupler @ 6kgf/Cm2 Pressure wit i/c all PVC standered Specials.

160 mm dia with coupler @ 6kgf/Cm2 Pressure wit i/c all PVC standered Specials.

200 mm dia with coupler @ 6kgf/Cm2 Pressure wit i/c all PVC standered Specials.

P/L following size of Finolex makes PVC Pipe 10 kg/Cm2 with required PVC standered special confirming to IS codes with latest amendmant and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to length and making joints i/c cost of socket, plstochem PV-85 pvc solvent cement complete, PVC pipe must be confirming to IS : 4985-2000 with latest amendment. Make-Finolax industries Ltd,/Kisan/ Supreme industries Ltd (Rate per Comparative Statement per Rm.) ....250 mm dia with coupler @ 10kgf/Cm2 Pressure wit i/c all PVC standered Specials.

P/L S&S centrigugaly cast (Spun)/Ductile Iron pipes conforming to IS : 8329 (DSR-2018, I.No. 18.72.3 ….5.01) 300 mm dia.

350 mm dia.

Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. External work. 15 mm nominal outer dia Pipes.

Supply and installation of required size steel pipe10 mm thick confirming to IS :3589 through trenchless excavation of thrust pit and receiving pit of required size and the excavation & filling back and compaction complete as per specification for road crossing by Auger boring method pipe will be installed at depth beyond 3.0 m below the ground surface in downward required slope(7.10) 300 mm dia

350 mm dia.

P/F M.S. specials such as tee, bends, collars, pipe tail piece etc. in required thick of MS sheet complete in all respect as per direction by the E/I. NSI

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing Sluice valve shall generally confirm to IS 14846 with latest amendment, with length over flanges as per PD of IS 14846 corrosponding to BS EN-558/ ISO 5752 Basic series 3 in CI construction having metal seating ( IS 318 Gr.LTB 2). with complete compone 1- Body / Door/ Dome-cast iron IS 210 Gr. FG 260 2- Sipindle- Non rising, Stainless Steel AISI 410 3- Body seat/ Door face - Gun metal; IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed) 4-Rivets - soft annealed brass 5 - Spindle Nut - Gun metal ; IS 318 Gr. LTB 2 6 - Stem seal - Greased Hemp 7- Fasteners - Carbon steel 8 - Flange Drilling - IS 1538 Table 4 & 6 (9) PN 1.0 10-Accessories (400 mm and above) - Ball thrust bearing to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear box for ease of operation , Air Plug 11-Painting/ Coating- inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE) 12- Hydro- test-( Open Ended only ) Seat; 10/16 Kg/cm2; Body15/24 Kg/cm2 13-Upto 600 mm dia Manual Operarted & above 600 mm Gear box Make-Indian Valve Pvt. (IVC)/ Kirloskar / Brothers Limited (KIRLOSKAR) (11.10) 100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

350 mm dia

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 10.00 .

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 10.00 .

Hiring of Gas cutting Set with Oxygen and LPG running time @ 6 Hrs

Hiring of welding Set running time @ 6 Hrs

Hire Charges of 50 KVA D.G. Set(Including cost Service of operating staff,supply of lubricating oil and diesel also)

Hiring of Diesel Engine ( including cost of Diesel, lubricant & Operator)