New Okhla Industrial Development Authority Tender

S/F of power plug with 15A/240V flush type switch and 5 pin 15 A/250V flush type universal socket in suitable M.S box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer. As per P.S No 1139.

Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, with one number 14 SWG copper earth continuity wire etc., complete in all respects including matching colour wash etc. complete in all respect. as per P.S No. 1304 B.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respect. . PS No 216B

Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire etc. complete in all respect as per PS No 217 B.

S/F of 5 Amp to 32 Amp SP MCB Havells make 10KA Complte in all respect as per PS No.- 1002 Cat-A.

S/F of 4 Pole MCB 63A Havells make. Complete in all respects.PS. No. 1020(A) (10KA) UPSR-2018

S/F surface /flush mounting 4 Way TPN distribution board without MCB complete in all rescpect as directed at site by E/I. PS No 1026 Cat-A.

S/F surface /flush mounting 8 Way TPN distribution board without MCB complete in all rescpect as directed at site by E/I. PS No 1028 Cat-A.

S/F of Ceiling fan 1200 mm sweep incl. proper connection. Complete in all respects (AOR)

S/F of 12" (300mm) Exhaust Fan Khaitan/Almonard Make. Complete in all respects (AOR)

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. as per PS No.1406(Cat-AAA)

Supply & laying of Al. Conductor PVC Insulated armoured served sheathed cables 1100 Volt grade at a depth of below ground level over a cusion of 750mm below ground level over a cushion of 75mm. thick sand all round and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer - Incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per PS No.-501 (1) 70 Sq.mm. x 3.5 Core (PS No. 501)

i) 16 sq. mm 4 core

S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of E/I. P.S No. 504 1) -'ii) 16 sq. mm

S/F of Fan Regulator Dimmer type 300x400 watt ISI marked on the existing switch board including making connection, required material, labour T/P etc. for proper completion of work of Anchor/Kinjal make. As per PS No. 1203 UPSR-2018

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR-18 (Elect.) Item No-14.16 -a)-90 mm dia (OD-90 mm & ID-76 mm nominal) SR-18 (Elect.) Item No-14.16.2

Supply and Fixing of Recess/ Surface/ Pendant mounting round 10 to 15 Watt Led Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. P.S.-1402 Cat-AAA UPSR-2018

Supply and Fixing of LED Tube light batten Fitting suitable for upto 1x22 watt. LED tube light on surface complete in all respects. P.S. 1413 CAT-AA

S&F of 100 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect P.S. 346

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS No. 725 (B)

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting,M.S. Channel Base with bottom and top cableentreis Electrical control panel with TPN ACB(65KA,4Pole Elect draw out , Micor processer ReleaseIPR2 ) and TPN MCCB's (Four Pole 36 KA withthermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrumentchamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall havesuitable capacity electrolytic aluminium busbars asper IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switchboard shall be of cat A & B Only. Incoming 200 Amp. MCCB-1 NoOutgoing 100 Amp. MCCB-2 Nos.Cat. B. Pannel Cubicle Type PS No-812