New Okhla Industrial Development Authority Tender

Supply & installtion OF LED LIGHT LIGHT FIXTURE , 36-40W, Power Module LED, 3000K, IP65, Suspended Body with threaded coupling G3/4"" for suspended mounting at the top, made of spun aluminum. Drop shaped screen in polymethylmethacrylate (PMMA), transparent made in single piece using injection moulding process. Pure polyester powder coating in Customized Metallic Grey Colour. Silicone gasket ensures IP Rating - IP 65. Height – 405mm, Diameter - 347mm, LED Module with Company /brand name printed on PCB with the metal core plate. LED chips of CREE/NICHIA/OSRAM/LUMILED make shall be used. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PMMA/PC . LED Lifetime >1,00,000hours. LM80 report from LED Manufacturer should be submitted. Safety test report as per IEC 60598/IS 10322 from UL/UL Authorised/3rd party NABL should be submitted. LM79 report also should be submitted fromUL/UL Authorised/3rd party NABL Laboratory. Sample should be submitted for approval from concerned engineer-in charge.Complete in all Respects as per Direction of E/I. Make-Neri, K-Lite,Ligman,Vak, Unilamp, Kesslec.

SITC OF 4.4M HEIGHT DECORATIVE TWIN ARM POLE 4.4M height decorative twin arm pole Made in combination of steel pipe sections 89mm dia. & top Maia design bracket which is made in combination of 60mm dia.(vertical), gradually bent 42mm dia. & two cast iron elements (No.1- dim.- 392mmx 303mm. ,No.-2-dim.- 103mmx120mm) to get 770 mm horizonal arm length & pleasing aesthetics. Decorative Base in Steel - Its design starting with dia 260mm for 170mm height, then tapers to 180mm, followed by a cylindrical section of 165mm dia., 365mm Height. It ends with a Top section consist of a Ring of 205mm dia. and 40mm height followed by a taperinng section with Bottom dia. 175mm, Top dia 105mm and Height of 90mm. Total Height of the Base is 700mm. A Steel base plate of 300mm x 300mm is welded at the bottom of the base. This base plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. Decorative Ring (89mm/60mm-) made of cast iron. Decorative cast iron pole top starts from bottom with a ring section of dia. 67mm followed by a ring of dia. 75mm, radially increases to 100mm dia. for a height 15mm,then radially reduces to 46mm for a height 20mm followed by a jack shaped section(45mm(W & 20mm(H), followed by a ring of dia.

60mm which is followed by a Conical section(bottom dia. 40mm & top dia.10mm,140mm(H) with sphere shape(30mm dia.) on top-total height of the pole top is 260mm. After Fabrication, Pole made of steel pipe sections should be shot blasted for the effective adhesion of 3layer coating so as to avoid the corrosion. Entire pole including the decorative elements shall be made to provide pleasing aesthetics as approved by Architect/ Engineer in-charge. The pole should be provided with an inbuilt junction box with 1No. 32A Heavy Duty Stud type connector and 1No. 6A SP MCB, at the bottom - the inbuilt box should have a flush door of suitable size. Wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole strength. Pole & Cast iron parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint. Sample should be submitted for approval from Architect/ engineer-in-charge. including foundation as per enclosed drwaing. Complete installation including laying of foundation plinth with foundation bolts as per foundation drawing enclosed. Complete in all Respects as per Direction of E/I. Make-Neri, K-Lite,Ligman,Vak, Unilamp, Kesslec.