National Projects Construction Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
National Projects Construction Corporation Limited - NPCC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Oct 2023
Closing Date31 Oct 2023
Tender Amount₹ 7,21,44,000
Costs
EMD
₹ 14,42,880Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_NPCC_170092_1Bid Award Id
ViewTender No
UPZ/347/NVS/Mathura/23-24/703Tender Authority
National Projects Construction Corporation Limited ViewPurchaser Address
-Website
http://http://npcc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
1332.98
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
99.03
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size)
179.66
-
-
... More
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
... More
Upto plinth level
-
-
-
... More
R.C.C. work in Footing
296.33
-
-
... More
R.C.C. work in Beam
88.78
-
-
... More
R.C.C. work in Columns
11.46
-
-
... More
Above plinth to floor-V lvl
-
-
-
... More
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
... More
R.C.C. work in Columns
95.56
-
-
... More
R.C.C. work in Lintel
21.73
-
-
... More
R.C.C. work in Beam
147.1
-
-
... More
R.C.C. work in Slab
300.31
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
773.3
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
667.68
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
2725.94
-
-
... More
Columns,Pillars, Piers, Abutments, Posts and Struts.
1596.84
-
-
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide.
2374.43
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
46.61
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
154.42
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
154.42
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
615.22
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
1402.69
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
1402.69
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
... More
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
... More
Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge.
-
-
-
... More
Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
... More
The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
1274.61
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
-
-
-
... More
a) Single leaf
382.52
-
-
... More
b) Double leaf
5.99
-
-
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer
-
-
-
... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size
3768.6
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.
4767.92
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube
607.5
-
-
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
6170.29
-
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.
263.46
-
-
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
-
-
-
... More
a 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood
286.13
-
-
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and
1.4 mm aperture on both sides
280.47
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
3016.67
-
-
... More
a 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
6977.24
-
-
... More
a 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1:6 (1 cement: 6 coarse sand)
5013.36
-
-
... More
a 6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand)
1929.25
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
334.74
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
1211.18
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
267.11
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
113.92
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
150.63
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm
32.36
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
179.78
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
483.96
-
-
... More
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia.
338.58
-
-
... More
Steel Painting:Applying priming coat:
-
-
-
... More
a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
701.29
-
-
... More
b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
701.29
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.
9247.53
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
5013.36
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
9247.53
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete. (a) 250mm x 16mm.
366
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
-
-
-
... More
A 300 x 10mm
366
-
-
... More
B 200 x 10mm
383
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (a) 125 mm.
852
-
-
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper
505
-
-
... More
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete.300 mm weighing not less than 330gms.
-
-
-
... More
a 300 mm weighing not less than 330gms.
366
-
-
... More
b 250 mm weighing not less than 280gms.
62
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
181.76
-
-
... More
Providing and filling of cinder in sunken portions.
33.74
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
65
-
-
... More
Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.
50
-
-
... More
SCHEDULE OF QUANTITIES FOR PLUMBING WORKS
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
31
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
-
-
-
... More
W.C. pan with ISI marked white plastic seat and lid
32
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia C.P. brass Single Hole Basin Mixture approved quality and make ,including painting of fittings and brackets, cutting and making good the walls wherever require.
-
-
-
... More
a) White Vitreous China wash basin size 550x 400 mm with 15 mm dia C.P. brass Single Hole Basin Mixture.
63
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
-
-
-
... More
Kitchen sink with drain board
-
-
-
... More
a 510x1040x200mm
31
-
-
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
a) 32mm dia
31
-
-
... More
b) 40mm dia
31
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
63
-
-
... More
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.
-
-
-
... More
a 15mm nominal bore
32
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet
-
-
-
... More
a) 100 mm diameter
63
-
-
... More
Providing and fixing CP Brass 32 mm size Bottal Trap of approved quality & make and as per thedirection of Enginer-in-charge.
63
-
-
... More
Providing and fixing CP Brass Single lever lelephonic wall mixture of quality & make and as per thedirection of Enginer-in-charge.
-
-
-
... More
a) 15mm dia nominal dia.
63
-
-
... More
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.
64
-
-
... More
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
63
-
-
... More
Providing and fixing Toilet paper holder
-
-
-
... More
a) C.P. brass
32
-
-
... More
Providing & fixing soil, waste and vent pipes.
-
-
-
... More
a) 100mm dia centrifugally cast iron S & S pipe as per IS:3989
132
-
-
... More
b) 75mm dia centrifugally cast iron S & S pipe as per IS:3989
170
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
-
-
-
... More
a) 100mm
129
-
-
... More
b) 75mm
165
-
-
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
-
-
-
... More
a) For 100mm dia pipe.
123
-
-
... More
b) For 75mm dia pipe.
84
-
-
... More
Providing & fixing cast iron coller.
-
-
-
... More
a) 100mm dia.
126
-
-
... More
b) 75mm dia.
90
-
-
... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.
-
-
-
... More
a) 100mm inlet & 75mm outlet.
187
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
... More
a) 100mm
35
-
-
... More
b) 75mm
68
-
-
... More
Providing and fixing plain cast iron S & S sanitary bend.
-
-
-
... More
a) 100mm
35
-
-
... More
b) 75mm
68
-
-
... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
-
-
-
... More
a) 100x100x100mm
34
-
-
... More
b) 75x75x75mm
37
-
-
... More
Providing and fixing cast iron terminal guard.
-
-
-
... More
a) 100mm
30
-
-
... More
b) 75mm
60
-
-
... More
Providing & fixing 32 # G.I. Pipes spout including cutting & making good the walls etc.
93
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
... More
a) 110mm diameter
172
-
-
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
a) 110 mm
42
-
-
... More
Bend 87.5 degree
-
-
-
... More
a) 110 mm Bend
84
-
-
... More
Shoe (Plain)
-
-
-
... More
a) 110 mm Shoe
42
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
42
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
a) 110mm
106
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
42
-
-
... More
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) around P.V.C /C.I. Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
-
-
-
... More
a) 110/75 mm diameter
125
-
-
... More
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
... More
(internal work)
-
-
-
... More
Exposed on wall
-
-
-
... More
a) 32mm dia nominal bore
125
-
-
... More
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.
-
-
-
... More
a) 32mm dia nominal bore.
140
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
internal work -Exposed on wall
-
-
-
... More
a) 20mm dia nominal outer dia pipes
215
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work including cutting chases and making good the walls etc.
-
-
-
... More
a) 15mm dia nominal outer dia pipes
215
-
-
... More
b) 20mm dia nominal outer dia pipes
105
-
-
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
... More
a) 15mm nominal bore
63
-
-
... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
a) 15mm nominal bore
78
-
-
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
... More
15mm nominal bore
105
-
-
... More
Providing & fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
125
-
-
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
a) 20 mm dia nominal bore
150
-
-
... More
b) 32mm dia nominal bore
16
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
... More
a) 25 mm nominal bore
30
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
8500
-
-
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
135
-
-
... More
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
... More
a) 100mm diameter
80
-
-
... More
b) 150mm diameter
60
-
-
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
... More
a) 100mm diameter S.W. Pipe
495
-
-
... More
b) 150mm diameter S.W. Pipe
255
-
-
... More
Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design:
-
-
-
... More
a) 150 x 100 mm. size P type
-
-
-
... More
With Sewer bricks conforming to IS : 4885
23
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
... More
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
... More
With FPS bricks of class designation 75
-
-
-
... More
For Sewer Line
19
-
-
... More
Extra for depth of man hole size 90x80 cm
10
-
-
... More
Inside size 90x120 cm & 90 cm deep including C.I. cover with frame (medium duty) total wt. of cover & frame to be not less than 116 Kg (wt. of cover 58 Kg & wt. of frame 58 Kg.
5
-
-
... More
Extra for depth of man hole size 90x120 cm
10
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design
-
-
-
... More
With 20x20 mm square bar
36
-
-
... More
SCHEDULE OF QUANTITIES FOR ELECTRICAL WORKS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group C
737
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular type switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
22
-
-
... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
a) 2X1.5 sqmm + 1x1.5 sqmm earth wire
875
-
-
... More
b) 2X2.5 sqmm + 1x 2.5 sqmm earth wire
1160
-
-
... More
c) 2X4.0 sqmm + 1x 4.0 sqmm earth wire
805
-
-
... More
d) 2X6.0 sqmm + 1x 6.0 sqmm earth wire
592
-
-
... More
e) 2X10.0 sqmm + 1x 6.0 sqmm earth wire
355
-
-
... More
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
440
-
-
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:
-
-
-
... More
a) 20mm
430
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
... More
TV antenna socket outlet
97
-
-
... More
Bell Push
31
-
-
... More
Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
110
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
164
-
-
... More
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
a) 1 or 2 module(75mm X 75 mm )
120
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc. as required.
528
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required.
188
-
-
... More
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connectionetc. as required.
104
-
-
... More
Supplying and fixing brass batten/angle holder including connectionetc. as required.
281
-
-
... More
Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.
239
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
37
-
-
... More
Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required.
126
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
114
-
-
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
315
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required.
-
-
-
... More
upto 450 mm sweep.
96
-
-
... More
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.
95
-
-
... More
Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.
68
-
-
... More
Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screwed, one loc at the conrners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
101
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
101
-
-
... More
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).
-
-
-
... More
a) 12 way, Double door
32
-
-
... More
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single Pole
313
-
-
... More
Double Pole
35
-
-
... More
Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required.
10
-
-
... More
Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
220
-
-
... More
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.
130
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Upto 35 sq. mm
90
-
-
... More
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
a) 3.5 X 35 sqmm. (32mm)
18
-
-
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
a) 100 mm Dia
135
-
-
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.
-
-
-
... More
a) 35 sqmm 3.5 core
560
-
-
... More
Supply and erection of 1X10 W mirror light complete in all respects
62
-
-
... More
Supply & fixing of 7/9 W LED BULB complete in all respect.
269
-
-
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect.
124
-
-
... More
Supply & fixing ofrecess/Surface/Pendent mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects.
-
-
-
... More
CAT AAA
108
-
-
... More
Supply of AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-Make: Havells-STANDARD -Refresh Air-SPS
-
-
-
... More
a) 300mm sweep.
92
-
-
... More
METER PANEL-BOAD (FOR TYPE-III RESIDENCE)
-
-
-
... More
Incoming :
-
-
-
... More
one (1) No.100Amp. MCCB-1No.
-
-
-
... More
Metering :
-
-
-
... More
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
... More
One (1) No. (0-100A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
... More
One (1) Set of Phase Indication Lamp.
-
-
-
... More
Bus Bar :
-
-
-
... More
One (1) No.125 A, TPN aluminimum bus bar of suitable length.
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
a) 32 Amp. DPMCB- 4 No.
-
-
-
... More
b) 25 Amp. SPMCB- 1 No.
-
-
-
... More
c) 32 Amp. DPMCB- 2 No-Spare.
-
-
-
... More
OR outgoing as per site requirment
9
-
-
... More
ANALYSIS OF RATE FOR SEPTIC TANK
4
-
-
... More
SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM
-
-
-
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
150
-
-
... More
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
... More
a) 150mm diameter
150
-
-
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
... More
a) 150mm diameter S.W. Pipe
150
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
... More
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
... More
With FPS bricks of class designation 75
-
-
-
... More
a) For Sewer Line
15
-
-
... More
Extra for depth of man hole size 90x80 cm
0.75
-
-
... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
12
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
For pipes 100 to 250mm diameter
45
-
-
... More
EXTERNAL WATER SUPPLY SYSTEM
-
-
-
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
Pipes, cables etc. not exceeding 80mm dia.
150
-
-
... More
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc.
-
-
-
... More
External work
-
-
-
... More
a) 25mm nominal bore.
50
-
-
... More
b) 32mm nominal bore.
40
-
-
... More
c) 50mm nominal bore.
60
-
-
... More
d) 80mm nominal bore.
75
-
-
... More
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.
-
-
-
... More
a) 25 mm diameter pipe
50
-
-
... More
b) 32 mm diameter pipe
40
-
-
... More
c) 50 mm diameter pipe
60
-
-
... More
d) 80 mm diameter pipe
75
-
-
... More
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.
-
-
-
... More
a) 25mm nominal bore.
2
-
-
... More
b) 32mm nominal bore.
2
-
-
... More
c) 50mm nominal bore.
1
-
-
... More
d) 80mm nominal bore.
2
-
-
... More
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With F.P.S. bricks
15
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
a) 25 to 40 mm dia nominal bore
8
-
-
... More
b) 50 to 80 mm dia nominal bore
5
-
-
... More
EXTERNAL ELECTRICAL WORKS
-
-
-
... More
Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required.
4
-
-
... More
Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
85
-
-
... More
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.
95
-
-
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
a) 100 mm Dia
25
-
-
... More
LAYING AND TERMINATION OF CABLE :
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Upto 35 sq. mm
270
-
-
... More
Above 35 sq. mm and Upto 95 sq. mm.
25
-
-
... More
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
a) 2 X 6 sqmm. (19mm)
2
-
-
... More
b) 2 X 10 sqmm. (19mm)
2
-
-
... More
c) 4 X 16 sqmm. (28mm)
2
-
-
... More
d) 3.5 X 70 sqmm. (38mm)
2
-
-
... More
CABLES
-
-
-
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.
-
-
-
... More
a) 6 sqmm 2.0 core
115
-
-
... More
b) 10 sqmm 2.0 core
55
-
-
... More
c) 16 sqmm 4.0 core
35
-
-
... More
d) 35 sqmm 3.5 core
65
-
-
... More
e) 70 sqmm 3.5 core
25
-
-
... More
EXTERNAL LIGHTING
-
-
-
... More
Supply, installation, testing and commissioning of external post top lantern with follong and complete as required.
-
-
-
... More
6m high(5.0m above ground) 65mm dia GI pole as approved, adopting socket at top for fixture mentioned below, base plate 300x300x6mm and provision for mounting junction box etc.-1 set
10
-
-
... More
Erection of pole in cement concrete 400x400x1000mm deep 1:3:6 ratio cement concrete foundation including excavation, refilling, secured with holding clamps, bolts, nuts, alighnment of poles casting etc. including 100 mm thick lean concrete shall be provided at the bottom.
10
-
-
... More
LED type 50 watt(street light) fittings of all types with all accessories.
10
-
-
... More
Suitable size control box with 1 no. incoming and 2 nos. outgoing terminals and 2 nos. tap-out terminal with 1 no. 5A hrc fuses complete.-1set
10
-
-
... More
Suitable number(S) 40mm dia class-B GI Pipes from above control box to upto 0.5 meter below ground level for power cable entry.
10
-
-
... More
PANELS
-
-
-
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.
-
-
-
... More
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only.
-
-
-
... More
The minimum clearances between bus bars shall be as follows :
-
-
-
... More
Phase to phase - minimum 20mm
-
-
-
... More
Phase to neutral-minimum 15mm
-
-
-
... More
CUBICAL PANEL BOARD ( MCCB TYPE )
-
-
-
... More
SUB PANEL-1 (IN SUBSTATION)
-
-
-
... More
Incoming :
-
-
-
... More
one (1) No.250Amp. MCCB-1No.
-
-
-
... More
Metering :
-
-
-
... More
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
... More
One (1) No. (0-250A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
... More
One (1) Set of Phase Indication Lamp.
-
-
-
... More
Bus Bar :
-
-
-
... More
One (1) No.315 A, TPN aluminimum bus bar of suitable length.
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
a 100 Amp. 4P MCCB- 1 No.
-
-
-
... More
a 63 Amp. 4P MCB- 1 No.
-
-
-
... More
a 32 Amp. SP MCB-2 No.
-
-
-
... More
a 100 Amp. 4P MCCB- 1 No-Spare.
-
-
-
... More
a 63 Amp. 4P MCB- 1 No-Spare.
-
-
-
... More
OR outgoing as per site requirment
1
-
-
... More
ABSTRACT OF COST FOR SURFACE DRAIN as per drawing to complete the job
850
-
-
... More
ANALYSIS RATE FOR 3.0 WIDE INTERLOCKING WITH BRICK TOE WALL(2.0 M LENGTH) PCC of 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) as per drawing to complete the job
1671.02
-
-
... More
ANALYSIS RATE FOR DRAIN (1.0 M LENGTH - 450X300 MM) as per drawing to complete the job
506.27
-
-
... More
ANALYSIS RATE FOR 3.0 WIDE P.C.C. ROAD WITH BRICK TOE WALL (2.0 M LENGTH) as pr Drawing to complete the job
569.34
-
-
... More
MAIN FEEDER PILLAR
-
-
-
... More
Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required.
-
-
-
... More
Incoming:
-
-
-
... More
a 1 No. - 800 Amp. 35ka 4 pole microprocessor release, MDO ACB (Ics=lcu=Icw) with O/L, S/C & earth fault protection.
-
-
-
... More
b 3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker 'ON'
-
-
-
... More
c 1 No. Intelligent multi-function digital panel meter for recording V (Between Phases and between each phase and neutral, A (In each phase and neutral), KWHr with suitable rating CTs, CT shorting links.
-
-
-
... More
Bus Bars:
-
-
-
... More
Electrolytic high conductivity aluminium three phase and neutral (full rated) busbars rated at 433V,50 Hz., 1000 amps, 35kA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints.
-
-
-
... More
Outgoing:
-
-
-
... More
a 125 Amp. 25ka FP Thermal based release, MCCB (Ics=lcu) with O/L, S/C & modular earth fault protection. - 9 Nos.
-
-
-
... More
b 100 Amp. 25ka FP Thermal based release, MCCB (Ics=lcu) with O/L, S/C & modular earth fault protection. - 7 Nos.
-
-
-
... More
c 63 Amp. 25ka FP Thermal based release, MCCB (Ics=lcu) with O/L, S/C & modular earth fault protection. -4 Nos.
-
-
-
... More
MAIN FEEDER PILLAR describe as above
1
-
-
... More
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :
-
-
-
... More
On bituminous surface @ 0.50 Kg / sqm
500
-
-
... More
a 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).
-
-
-
... More
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt
500
-
-
... More
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete.
500
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
25
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements