National Institute Of Fashion Technology Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size.

Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS : 2222 in super structure above plinth level upto floor five level in cement mortor (1 cement : 6 coarse sand).with modular bricks.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand).

12 mm of cement plaster of mix 1:4 (1 Cement :4 fine sand).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors.roofs,landing,balconies,and acess platform with water proof ply 12 mm thick.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.Johnson/Somany,Kajaria.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.Johnson/Somany,Kajaria.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providng and fixing CP Brass bib cock of approved quality confirming to IS :8931 15 MM dia nominal bore.

Providng and fixing 600X450mm bevelled dege mirror of superior glass (of approved quality) complete 6 mm thick hard board ground fixed to wooden cleats with CP Brass screws and washers complete.

Providing and fixing PTMT towel rail complete with bracket fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.450 MM long towel rail with total length of 495 MM ,78 MM wide and effective height of 88 mm , weighing not less than 170grams.

Providing and fixing angle cock of approved quality as per instruction of engineer incharge.

Providing and fixing cholrinated polynyle chloride (CPVC) pipe having thermal stability for hot and cold water supply ,including all CPVC plain and brass threated fitting and fixing the pipe with clamps 1.M spacing spacing .This includes jointing of pipe and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing the joint as per instruction of Engineer in charge.Concealed work including cutting chases and making good the wall etc.20 mm nominal dia pipe.18.8.2

Supply and fixing UPVC pipe of dia 110 mm with required socket solvent as per instruction of engineer in charge

Supply and fixing UPVC pipe of dia 90 mm with required socket solvent as per instruction of engineer in charge

Supply and fixing nahani trap of 90X100mm as per instruction of engineer in charge

Supply and fixing UPVC Elbow 110X110 mm as per instruction of engineer in charge

Supply and fixing UPVC Tee 90 mm as per instruction of engineer in charge

Supply and fixing UPVC Tee 110 mmX110 mm as per instruction of engineer in charge

Supply and fixing brass concelead stop cock as per instruction of engineer in charge

Supply and fixing CPVC Bib cock as per instruction of engineer in charge

Supply and fixing CPVC Brass elbow 20 mm as per instruction of engineer in charge

Supply and fixing CPVC plain elbow 20 mm as per instruction of engineer in charge

Supply and fixing CPVC Tee 20 mm as per instruction of engineer in charge

Supply and fixing CPVC Socket 20 mm as per instruction of engineer in charge

Supply and fixing CPVC endow cap 20 mm as per instruction of engineer in charge

Supply and fixing CPVC plug 20 mm as per instruction of engineer in charge

Supply and fixing CPVC Tank Nipple 32 mm as per instruction of engineer in charge

Supply and fixing CPVC Plain elbow 32 mm as per instruction of engineer in charge

Supply and fixing CPVC Socket 32 mm as per instruction of engineer in charge

Supply and fixing CPVC elbow 32X20 mm as per instruction of engineer in charge

Supply and fixing CPVC T 32X20 mm as per instruction of engineer in charge

Supply and fixing CPVC balvalve 32 mm as per instruction of engineer in charge

Supply and fixing CPVC pipe 32 mm as per instruction of engineer in charge

Constructing masonary chamber 60X60X75 cm inside in brick work in cement mortor 1:4 for sluice valve with CI surface box of 100 mm top diameter 160 mm bottom diameter and 180 mm (deep) with chain lid and RCC top slab 1:1.5:3 including necessary excavation foundation concrete 1:5:10 and inside plastering with cement mortor 1:3 12 mm thick finished with floating coat of neat cement complete as per standard design with common burnt clay F.P.S (non modular )brick of class designation 7.5

Providing and placing on terrace (at all floor level)polythylene water storage tank IS12701 marked with cover and suitable locking arrangment and making necessary holes for inlet,outlet and overflow pipes but without fitting and base support for the tank.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer- in-charge.(extruded section profile size 42X50 MM).

Providing and fixing 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (New Work two or more coat applied @1.43 ltr/10 sqmtr over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm).

Distempering with 1st quality acrylic distemper (ready mixed) having contained less than 50gram /ltrs of approved manufacturer and of required shade and all colour all complete to achieve even shade and colour .New Work two or more coat over and including water thinnable priming coat of cement primer having VOC content less than 50 gram/lttrs.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III)derived from natural sources : 6 graded stone aggregate 20 mm nominal size) derived from natural sources.

Providing and fixing steel work welded in built-up section /framed work including cutting, hosting fixing in position and applying primer coat of approved steel primer using structural steel etc. as required. MS angle of size 35mmX35mmX3mm and square bar 10mm. of Weight 40 Kgs. Galvanised MS wire wire gauge with 0.63 of 1.5sqm, Handle 2Nos.But hinges 100X75X10mm, tower bolt 202X42X18mm with sliding bolt etc. with complete fitting. Three kabja should be welded in the iron door frame.