National Botanical Research Institute Tender

Supply and fabrication of wooden working table cum cupboards unit of size 2720x600mm and ht.750mm underneath. The unit will have both side drawer in 450mm length, 550mm deep and middle will be cupboard having openable double leaf shutter with one horizontal shelf. The unit will be fabricated with 19mm commercial board Century/Archid or eqvt. make except bottom of drawer and back which will be 12mm commercial ply Century/Archid or eqvt. make . The front, side & top will have laminate 1.00mm thick Centaury/Greenlam/Merino or eqvt. make. The job includes all fittings such as L drop, channel, SS handle, magnet MP lock, second class teak lipping on edges and painting of inner exposed surface with enamel paint of approved shade and make over wood primer complete.

Supply, fabrication and installation of wall mounted wooden storage rack of size 1820x670mm and 400mm deep having three nos vertical compartment with one nos horizontal shelf. Each compartment will have double leaf side hinged shutter. The unit will be made out of 19mm Commercial board Century/Archid or eqvt. make except back which will be 12mm thick commercial ply Century/Archid or eqvt. make. The fornt and outside surface will be provided 1mm thick laminate Century/Archid or eqvt. make except inner and back. The remaining inner surface will be painted with synthetic enamel paint of approved colour and shade over wood primer. The job includes all T&P, parliamentary hinges, S.S. handle, magnet, MP Lock, nails screws etc. complete. The job will be completed to entire satisfaction of Engineer In-Charge (front area of the rack will be measured for payment).

Supply, fabrication and installation of display box of size 1820x600m and 300mm deep having one vertical partition. The unit will be fabricated with 19mm Centaury/Archid or eqvt. make except back & front. The back will be 12mm commercial ply Centaury/Archid or eqvt. make and front will be sliding glass with 6mm thick float glass. The inner back surface will have pin board and velvet cloth over head. The exposed wooden surface will be provided 1mm thick laminate Centaury/Merino or eqvt. make . the edge will have 2nd class teak wood lipping of size 19x6mm duly polished with French sprite polish. The job will be completed to entire satisfactions of Engineer In charge.