National Botanical Research Institute Tender

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm.

Providing & fixing UPVC glazed Sliding cum casement window /ventilator PSP/Descon Ecowin/ Wintech/Smita or equivalent make as per approved design made out of multi chambered UPVC section with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the window. The sliding outer frame having a overall size of 60x45, 94x45 or 108x45mm with reinforcement of 1.2mm thickness, Glass sash with overall size of 39x58mm with reinforcement of 1.2mm thickness, Mesh sash of overall size 39x58mm reinforced with 1.2mm of GI section Glazing bead for fixing of glass shall be of size 20x18coextruded with TPV gasket Windows may also have fixed casement portion on top and Ventilators(Openable & fixed) with outer frame size 60x55mm, sash size 75x60mm and beading of size 34x20mmWindow /Ventilators shall be provided with 5mm plain/4mm Pinhead float glass, standard hardware & looking system. Wall thickness of frame & sash shall be 2 – 2.2mm The installation shall be done using steel fasteners and all the edges shall be sealed using silicon on both inside & outside faces including coast and conveyance of all materials, accessories, labour charges for transportation, installation at site complete as per direction of Engineer-In-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and fixing sun-control film Garware or eqvt. make including adhesive, wastage, labour etc. complete.

Supply & Installation of vertical blinds 100mm Vista (Deluxe Collection) or eqvt. make in approved shade including top runner, cord chain & weight comp.

Supply, Fabrication & fixing in position wooden cupboard shutter under working platform made out of commercial board 19mm CENTURY/GREEN PLY or eqvt. make fixed/ screwed in proper position divided in Three vertical part and each parts will have one double leaf & one Single leaf side hung hinged shutters with IInd class teak wood leaping 19x6mm on edges. The one no horizontal shelf with same board will also be provided in the middle. The front will have laminate with 1.00mm thick mica Marino/IPL/Green Lam or eqvt. make and inner exposed face will be painted with enamel paint two or more coat over one coat of wood primer. The job includes MP lock, parliamentary hinges, S/S handle, Ball Catcher etc. complete. The job will be completed to entire satisfaction of Engineer-Incharge.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm.

Providing fixing CP brass Swan neck tap (three way) Vijay or eqvt. approved make heavy quality complete.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:15mm nominal bore.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Note:- Rates should be quoted inclusive of all Taxes, GST etc.