National Botanical Research Institute Tender

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood.

Providing and fixing wire gauge shutters in door, windows, clerestory window in existing pattern and design using stainless steel grade 304 wire gauge with wire of dia 0.56 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutter using Sal Wood.

Providing and fixing door window/clerestory window glazed shutter in existing pattern & design using 4mm thick frosted glass panes i/c ISI marked M.S. pressed butt hinges bright finished of reqd. size with necessary screws: Sal wood 35mm.

Providing & fixing looking glass mirror of superior glass of approved quality and of reqd. shape and size with plastic moulded frame of approved make and shape with 6mm thick hard board backing size 600x450mm.

Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

(a) 200x10mm

(b) 150x10mm

(c) 100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4 mm.

Fixing chowkhats in existing opening in brick / RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhats and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62x19 mm.

Supply, fabrication & fixing in position wooden cupboard shutter under kitchen platform of size 3.00 (L) x0.75m (D) x0.75m (Ht.) Approx. made out of Malaysia sal wood frame of section 65x40mm and shutter of commercial board 19mm century/Archid or eqvt. make fixed/screwed in proper position divided in five parts with vertical sal wood members and board of same size & one Horizontal shelf with same board of same size in one parts of cup-board. In central parts a provision of one drawer will also be made will same boards with runners etc. complete. The front shutter shall be provided with 1mm thick Marino/Century or eqvt. make mica pasted over board and hinged with parliamentary hinges of full ht. With teak wood lipping on edges of shutter complete including all fittings such as chapka magnet wooden knobs. The entire assembly shall be painted with syn. enamel paint over a coat of primer on exposed wooden surface in desired shade. The job will be completed to entire satisfaction of Engineer-In-charge (Front area will be measured for payment.)

Supply, fabrication and erection of wooden racks over kitchen platform of size 2.44m (L) x0.30m (d)x0.60(ht.) (approx) with 19mm thick commercial board Century/archid or eqvt. make. The rack will be divided in three equal parts vertically and two equal parts horizontally with same board the shutter will be hinged by means of parliamentary hinges complete with teak wood lipping i/c fittings such as aluminum chapka, wooden knob, clip in each shutter. The frontage shall be glued over board with 1mm thick mica Marino/Century make in approved shade. The entire paint of desired/matching shade over primer complete. The job will be completed to entire satisfaction of Engineer-In-Charge.(Front area will be measured for payment).

Providing and fixing horizontal shelf in cupboards made out of 19mm thick commercial board Century/archid or eqvt. make. to be supported over sal wood buttons of section 35x25mm duly screwed on wall. The front of the shelf will have teak wood lipping of size 19x6mm duly pasted and screwed. The surface will be painted with enamel paint of approved shade and make over wood primer.

Providing and fixing wooden cupboard shutters with 19mm thick commercial board of approved make, including IInd class teak wood lipping of 19mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge

Note:- Rates should be quoted inclusive of all Taxes, GST etc.