National Botanical Research Institute Tender

Supply, fabrication & fixing in position wooden cupboard shutter under kitchen platform of size 3.00 (L) x0.75m (D) x0.75m (Ht.) Approx. made out of Malaysia sal wood frame of section 65x40mm and shutter of commercial board 19mm century/Archid or eqvt. make fixed/screwed in proper position divided in five parts with vertical sal wood members and board of same size & one Horizontal shelf with same board of same size in one parts of cup-board. In central parts a provision of one drawer will also be made will same boards with runners etc. complete. The front shutter shall be provided with 1mm thick Marino/Century or eqvt. make mica pasted over board and hinged with parliamentary hinges of full ht. With teak wood lipping on edges of shutter complete including all fittings such as chapka magnet wooden knobs. The entire assembly shall be painted with syn. enamel paint over a coat of primer on exposed wooden surface in desired shade. The job will be completed to entire satisfaction of Engineer-In-charge (Front area will be measured for payment.)

Supply, fabrication and erection of wooden racks over kitchen platform of size 2.44m (L) x0.30m (d)x0.60(ht.) (approx) with 19mm thick commercial board Century/archid or eqvt. make. The rack will be divided in three equal parts vertically and two equal parts horizontally with same board the shutter will be hinged by means of parliamentary hinges complete with teak wood lipping i/c fittings such as aluminum chapka, wooden knob, clip in each shutter. The frontage shall be glued over board with 1mm thick mica Marino/Century make in approved shade. The entire paint of desired/matching shade over primer complete. The job will be completed to entire satisfaction of Engineer-In-Charge.(Front area will be measured for payment).

Providing and fixing wooden cupboard shutters with 19mm thick commercial board of approved make, including IInd class teak wood lipping of 19mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge