National Botanical Research Institute Tender

Supply, fabrication and installation of Working Table of size 1620x 600mm and 750 mm height with cupboard and drawer unit underneath. The either sides of table will have drawers unit comprising 03 Nos drawer and central portion will be side hung cupboard shutters. The table top will be 18mm thick black granite stone with moulded edges on front side. The table frames will be teak wood of section 75x40mm and drawer unit will be 19mm commercial board Century/Archid or eqvt. make except back of table and bottom of drawer. The back will be 12mm commercial ply and drawer bottom will be 6mm commercial ply of Century/Archid or eqvt. make. The cupboards unit will have openable type side hunged shutter with single horizontal shelf in middle with same material. All exposed exterior surface will be polished with French sprite polish and inner surface will be painted with enamel paint of approved colour & shade over primer complete. The job includes telescopic channel Ozone/Hettich make, SS handle 100mm, teak wood lipping 19x6mm, MS hinges 75x19x12mm, magnet and MP lock Godrej/Link or eqvt. make. The work will be completed to entire satisfaction of Engineer In-charge.

Same as item No1 but underneath the table top, 02 nos cupboard shutters compartments and one drawer unit comprising 03 Nos drawer will be provided instead of 02 Nos drawer unit & one cupboard unit.

Supply, fabrication and installation of wall mounted wooden storage rack of size 1900x800mm and 280mm deep having three nos vertical compartment with one nos horizontal shelf. Each compartment will have double leaf side hinged shutter. The unit will be made out of 19mm Commercial board Century/Archid or eqvt. make except back which will be 12mm thick commercial ply Century/Archid or eqvt. make. The all exposed surface will be provided 1mm thick laminate Century/Archid or eqvt. make except back. The remaining inner surface will be painted with synthetic enamel paint of approved colour and shade over wood primer. The job includes all T&P, parliamentary hinges, S.S. handle, magnet, MP Lock, nails screws etc. complete. The job will be completed to entire satisfaction of Engineer In-Charge (front area of the rack will be measured for payment).