Muzaffarnagar Development Authority Tender

Finishing wall with weather coat paint of approved make & quality on new work with two coats to given an even shade including supply of all material, labour, tools and plant etc. required for completion of the work. [SI No.new item of Ch-15]

Providing & fixing GI pipes B - class Jindal or equivalent complete with GI fittings and clamps, including cutting & making good the walls etc. Internal work- Exposed on wall complete and testing also as per direction of Engineer in charge. Internal work- Exposed on wall 25mm nominal dia

Supply and fixing 10 to 12 mm thick kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry,jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work.

Providing and eracting direction and place identification of retro reflectorised sign boards as per IRC:67 made of high intensity grade sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thickwith area exceeding 0.9 sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 02 nos firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60 cm , 60cm below ground level as per approved drawing with 7 years warrenty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royality etc., all materials, labour, T&P/machine etc. required for proper completion of the work. NOTE: The comosite warrenty jointly signed by original manufacturer and authorised convertar of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage.

Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 watt confirming to IP 66 and above protection complete in all respect. CAT AAA SI (elect) No. 1423.

Supply and fixing of pre cast cc benches

Supply and fixing of the following machine for open GYM including supply of all materials, labour. T&P etc. required for proper completion of the work as per direction of Engineer in charge-

(a)Stair steper- Dimension 1000x800x1400mm

(b)Arm wheel- Dimension 850x800x1800mm

(c)Elliptical exerciser- Dimension 1200x540x1600mm

(d)Twister - Dimension 1700x1300x1300mm