Muzaffarnagar Development Authority Tender

M-150 Brick Work in 1:4 one cement and four coarse sand of 1.25 FM mortar in foundation and plinth including supply of all materials, labour , T&P etc. required for proper completion of the work. SI No. 305(a)/2022

RCC work with cement, approved Coarse sand and 20mm stone grit in proportion of 1:1.5:3 in raft and foundation excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. S.I. No. 287(a) /2022

RCC work with cement, approved Coarse sand and 20mm stone grit in proportion of 1:1.5:3 in column and Tie Beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (S.I. No. 289/2022)

M-150 Brick Work in 1:4 one cement and four coarse sand of 1.25 FM mortar in super structure including necessary cutting &moulding of bricks and required thickness of wall not be less than 1 brick. SI No. 305(a)+309+310/2022

Cement Concrete with 2 cm gauge stone grit, approved coarse sand, cement in proportion of 4:2:1 including supply of all materials, labour, T&P etc. required for proper completion of the work.SI No. 279(a)/2022

12mm thick plaster with cement and fine sand of 1.25 fineness modules mortar in 1:4 over brick work minimum thickness not to be less than 1cm including supply of all materials, labour, T&P etc. required for proper completion of the work.(S.I.no. 584/2022)

Add for Extra labour and material for plaster over Rough face on one brick wall. (S.I. No 596/2022)

Supply and fixing of Kota stone in floor ing 25mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for prorper completion of the work. (S.I. No 14.26 New item-2 ch.no-14)

M.S (Tor steel or plain) work in plain work such as RCC or RB work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire (S.I. No. 504/2022) A.R.

M.S. or iron work of small sizes and section such as M.S. Grills/Stair case railing/gates/trusher/racks etc. wrought to required from including supply of steel, bolts, nuts wastage etc. and their fixing required for proper completion of the work. (S.I. No 502a/2022)

Painting or varnishing work in small areas or new wood work with two coat (upto one square meter or ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools& plants etc. required for proper completion of the work. paint to be used ISI marked. (S.I. No. 641+642/2022)

Providing wall putty on new surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats, (New Item/Ch-15)

Providing cement primer on old/new surface (New item/Ch-15)

Finishing wall with one coat of weather coat paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools& plant etc.required for proper completion of the work. S.I. No (New item /Ch-15)

Supply and fixing of PVC corrugated conduits of 25 mm outer dia mtr. on surface as sleeving including all labour, T&P atc. Required for proper completion of work as per direction and satisfaction of Engineer in charge. (S.I. No 185(III))/2018 (Electrical)

Construction of Path Way

Excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50 M lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30 M from the foundation trenches. (S.I. No. 251a) /2022

Concrete with 4 cm gauge brick ballast, fine sand of 1.25 FM and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials, labour, T&P etc. required for proper completion of the work. (SI No.273/2022)

M-150 Brick Work in 1:4 one cement and four coarse sand of 1.25 FM mortar in foundation and plinth including supply of all materials, labour , T&P etc. required for proper completion of the work. SI No. 305(a)/2022

Cement Concrete with 2 cm gauge stone grit, approved coarse sand, cement in proportion of 4:2:1 including supply of all materials, labour, T&P etc. required for proper completion of the work.SI No. 279(a)/2022

12mm thick plaster with cement and fine sand of 1.25 fineness modules mortar in 1:4 over brick work minimum thickness not to be less than 1cm including supply of all materials, labour, T&P etc. required for proper completion of the work.(S.I.no. 584/2022)

Earthwork in cutting or in embankment in ordinary soil, excavation to be done from regular pits not exceeding 1/2 M. in depth and work embankment to be in 20 cm layer including ramming and dressing the surface to required levels and slopes and also including 1.5M lifts and lead up to 5 km . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30M distance as directed by the Engineer-in-charge, including the cost of royalty of earth.@30.00 per cum. SI. No. 253(a)+261(b)/2022.

Providing & laying of interlocking concrete Block Pavement having thickness 60mm as per drawings and technical specification Clause 1504 (Exclusive G.S.B.) (S.I. No New Item 13/Ch-20)

Supply and fixing of Kota stone in floor ing 25mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for prorper completion of the work. (S.I. No 14.26 New item-2 ch.no-14)

Light Work

Supply and fixing of modern lasercut design light column (Total heightSupply of lite Modern laser cut design light column (Total height -3500 mm), in square cross section (150x150mm) MS, MS Sheet thick--ness 23mm including laser profile jali pattern(2000mm height of laser MS sheet) cladded with opal acrylic diffuser and additional post top head with light element, MS pedestal base plate 250x250x12mm, black n colour, coated for high corrosion resistance UV protected PU paint, silicon gasket, SS Fasteners, Integral driver, IP66, IK07.360 degree light distribution in the column part is provided with 45 watt Led light mounted vertically (min 90lm/watt, top head comprising with 4X20Watt led lights (min 110 lm/watt) with low glare line of vision, Efficacy85%. co. related colour Temperature (CCT) 3000-3500 K, Ingress Protection P-66, Production Tolerance +-3% as per IS, LED Life 50000 Burning hours, Pre wired, with earth connection, Integral Junction chamber for cable termination- with 4Way 32 Amps heavy duty connector-1 No SP MCB and Driver of both lighting Units, bolts, Fasteners and all accessories. Operating Voltage - 240V AC, Frequency - 50 Hz, CRI 70, PF - 0.95, THD 10%, Internal Surge protection 4KV.External Surge Protection 10KV. Total wattage -125 watt complete in all respect as per E.I.as per Engineer-in-charge. (MR)

Supply and fixing of Urban Ornamental Led Post Luminaire (PT-E27) made of aluminium housing duly powder coated/PU painted with PC/PMMA Clear/Frosted single piece diffuser with sturdy six arm. High Lumen are directly mounted on aluminium heat sinks complete in all respect as per E.I.Base with S.S. Plate. (MR)

Supply and fixing of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with Cts etc. in case of TPN complete in all respect. 25 amp SPN (S.I. no 807 b(ii)/2018)

Supply and fixing of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length 2000mm, outer pipe 76mm inner Dia 38mm termina Dia 12 mm,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. S.I no 725(D)/2022

Supply and laying of 10.0mm. x 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts conductor grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (S.I. No 501(h)/2018 Elec)

Supply and fixing of plaing or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer- Incharge. (S.I. no 504(c)/2018)

Supply and fixing of 32 Amp. 240 V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respects. (S.I. no 302/2018)

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect as per direction of E/I S.I No. 652

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect as per direction of E/I S.I No 1455 CAT-AAA

Supply and fixing of single unit LED aviation Obstruction light complete with transformer and LED spiral etc complete in all respect. S.I No-409

Supply and fixing of cast iron pole which double arm bracket (Luxmax-BKT-40) with Lumax IRIS-N fixture (Lumax-PT-150H ornamental light) The poles are primer coated and painted with polyurethane paints. Pole are suitable for single/double/tripple/four side post top/drop down luminaries. The pole has a servise window at bottom comprising for way 24AMP connecter terminal and MCB poles 4.5 meter long, complete in all respect. (MR)

Supply and fixing and concealing of 25 mm dia. 2 mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with orinal resin/adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction fo Engineer in charge. (S.I. no 149(A)/2018 )

Supplty and fixing 1.5 sqmm PVC insulated double core aluminium conductor cable in heavy guage. (MR)