Directorate Of Urban Local Bodies Tender

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 8 : 4 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.

RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost.

Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in Superstructure including supply of all materials, labour and tools and plants etc. Required for proper completion of the work.

Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured.

12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 4 part of find sand of 1.25 fineness modulus.

15mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 4 part of find sand of 1.25 fineness modulus.

Supply and fixing 6mm (1/4") China white glazed tiles in flooring or in skirting or dado laid with ratio 1:3 cement and approved coarse sand finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tool and plants etc. required for proper cpmpletion of the work.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

supply & Fixing of 10cm Internal dia PVC pipes complete with rose- heads, bends abd gratings & including supply of necessary M.S. clamps 2.5cmx3mm (1"x1/8") fixed to walls, with & including supply of 15cm (6") long 6mm (1?4") dia nails & including supply of all materials, labour and T&P etc required for proper completion of the work and also including repair of plaster, pointing etc if damaged during fixing of pipes, details of 30' length.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

2cm (3/4") thick cement plaster in dado of skirting in 12 consisting of one part of cement and two parts of approved coarse sand laid in panels, finished with 3mm 1/8") flooating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Supply and fixing of 35 mm thick commercial quality Sitapur ply or other approved plywood flush shutters including stops and including fixing and adjustment of hinges, bolts, locks handles springs and/or other fittings but excluding their supply and including painting with two coats of black japan on all Iron fittings if necessary and including fixing the glass panes with putty and brad glass to be 4mm thick fitting with necessary screw to be supplied depertmentally. SOR -(470 (a) + 472 )

Providing and fixing first quality indian type white glazed earthen ware ISI marked WC pan size 580 mm. (Hindustan, Ceta make) with 10 cm. PVC "P" trap of approved make with 10 litres low level flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with syphon, brass fitting and GI chain pull, RS or CI Brackets, 32 mm. dia. GI flush pipe "B" class (2 m.) with brass unions etc. 32 mm. dia. PVC bend 32 mm. dia. PVC socket, 15 mm. dia. overflow pipe with specials and masquito proof couplings of approved minicipal design, 15 mm. dia. brass stop cock (400 gms.) plastic connection (1.5" x 1") with brass unions including supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3" thick C.C. in proportion of 12:6:1 including supply of all materials labour, T&P etc. complete.

Providing and fixing flat back 465 mm. x 355 mm. x 265 mm. size lipped fron urinal basin of white glazed earthen ware 1st quality (Hindustan, Neyeer make) ISI marked with 5 litres CI automatic flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with necessary fittings, RS or CI bracket standard size, 32 mm. dia. GI flush pipe "B" class with brass unions of fittings and GI waste pipe 25 mm. dia x 0.66 mm. complete including supply of all materials, labour and T&P etc. required for proper completion of the work including painting of cistern and fittings with approved paint, cutting and making good the wall and floors where required with cement sand and grit.

Providing and fixing 550mmx400 mm. wash hand basin of white glazed earthen ware 1st quality ISI marked (Hindustan, Neyer, Cera make) with RS or CI brackets painted white, 15 mm. dia. CP brass pillar cock with CP metal handle (weigth not less than 400 gms.) ISI marked and 32 mm. dia. CP brass chain with rubber plug, 32 mm. dia. CP brass waste standard pattern with check nut 32 mm. dia. CP brass P or S trap and unions complete with PVC connection 0.50 size including supply of all required materials, labour, T&P etc. required materials labour, T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement, coarse sand and grit, fittings used should be of superior quality.

2.5 cm (1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4") graded approved stone laid in panels finished with 3mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and excluding 8cm (3") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Supply and fixing Nahani Trap Indian make of approved heavy quality complete with CP brass grating, Nahani trap laid over base cement concrete 1:6:12 including supply of all materials, labour, T&P etc. required for proper completion of the work.

Providing and fixing 15 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete with G.I. specials such as bends, tee, socket cross, clamps, earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting, where required, cutting and making, good the walls etc. and materials, labour, T&P etc. complete. (Internal work)

Providing and fixing 25 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete with G.I. specials such as bends, tee, socket cross, clamps, earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting, where required, cutting and making, good the walls etc. and materials, labour, T&P etc. complete. (Internal work)

Supply and fixing C.P. brass bib cock heavy quality 15 mm. dia. (400 gms.) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work.

Supply and fixing C.P. brass stop cock heavy quality 15 mm. dia. ISI marked including cutting and threading the pipe, if required including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing low density polythene tank sintex or equivalent.

Providing and fixing 25 mm. dia. Brass ferrule including supply of all materials, labour and T&P etc. and boring and tapping the main required for proper completion of the work.

Providing and fixing 25 mm. dia. PVC ball float valve with barss rod and union complete ISI marked including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing sand cast iron jali (grating) for floor/nahani trap. 100mm dia

Wiring points for light with 1 sqmm FRLSH PVC insulated single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting. Complete with 1.5 sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.

plug point with modular switch & socket in place of piano type switch & socket.

Supply & wiring of sub-main with 2 nos 2.5 sqm FR PVC insulated 1100 volts grade multistand single core copper conductor cable in 20 mm diameter heavy duty 2mm thick PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete.

Supply & wiring of sub-main with 2 nos 6 sqm FR PVC insulated 1100 volts grade multistand single core copper conductor cable in 20 mm diameter heavy duty 2mm thick PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete

Supply and fixing of flush/surface mounting distribution boards without MCB with additional metal door complete in all respects. (CAT- B) 8 Way SPN

Supply & fixing of 5/6/7 5/10/15/20/25/30/32 Amp SPMCB 9 KA/10 KA

Supply and fixing of LED Tube Light batten fitting sunable for up to 1 X 22 Matt 1D tube light on surface complete in all respect.CAT - AAA

Supply and fixing of GP Modular switch box for 8 Module of approved make made up of 10 mm thick 1S1 Marked, G P sheet including adjestable Nakka and holes plugged with PVC Nylon Caps Two or more holes for pipe entry of 254 mm on upper and lower sides of the box Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed& brand name should be embossed Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer- in-charge. 40 Amp. DP MCB

Providing and fixing Display board etc all complete.