Directorate Of Urban Local Bodies Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Directorate Of Urban Local Bodies Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Sep 2022
Closing DateCancelled
Tender Amount₹ 1,48,13,216
Costs
EMD
₹ 2,96,265Document Cost
₹ 17,476Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_DOLBU_730279_1Bid Award Id
ViewTender No
331/NPP-BHINGA-E-TENDER NOTICE/2022 DT16-09-22Tender Authority
Directorate Of Urban Local Bodies ViewPurchaser Address
-Website
http://http://localbodies.up.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand : 8 40 mm nominal size Brick Ballast) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
27.52
-
4400
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.288.
27.57
-
9600
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
10.65
-
10700
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
17.8
-
10200
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
138.98
-
5850
... More
M-150 class brick work in 1:4 cement and coarse sand 2.25 F.M.mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.305(b),309 & 310(a)
66.26
-
6690
... More
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
318.84
-
74.5
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
43.98
-
6150
... More
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
344
-
245
... More
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
1204
-
150
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.47.1.
1548
-
123
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
35.89
-
125
... More
Construction of embankment with approved material obtain from availble land as per permitted and approved by Engineer in charge and as per technical spesification clause 301.3,4,1 with all lift and leads spreading , gradding to required slope and compecting to meet requirement of table 300.1 and 300.2 as per technical spesification clause 301.5
17.88
-
286.4
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand : 8 40 mm nominal size Brick Ballast) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
13.51
-
4400
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.288.
2.44
-
9600
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
1.57
-
10700
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
2.99
-
10200
... More
RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC slab excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.287
5.59
-
10600
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
15.33
-
5850
... More
M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.303,309 & 310
24.76
-
6690
... More
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
227.15
-
74.5
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
6.87
-
6150
... More
Supply and fixing of 35 mm thick Flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts locks,handles,springs fitting as per DSR-9.21.1
3.99
-
1474.7
... More
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300mm long with necessary screws etc.completenas per DSR-9.62.1
4
-
383.9
... More
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.63.1
4
-
100.8
... More
Providing and fixing ISI marked oxidised M.S.door handles 125 mm long conforming to IS:4992 with necessary screws etc.completenas per DSR-9.66.1
4
-
89.2
... More
Providing and fixing galss panes with putty and glazing clips in steeel doors,windows,clerestory windows all complete with 4 mm thick galss panes as DSR-10.30.1
3.29
-
1030.2
... More
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc.complet as per DSR.No.11.41.2
39.78
-
1533.74
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture),of approved make,in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-chage,in skirting,risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per sqm,including pointing in white cement mixed with pigment of matching shade complete as per DSR-11.36
16.23
-
1245.2
... More
Providing andlaying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacture),of 1st quality conforming to IS:15622 of approved makein all colours,shades exceptwhite,ivory,Grey,Fume red Brown laid on 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand) including pointing the joints with white cement matching pigments etc. complete as per DSR-11.40
3.15
-
1046.67
... More
4.0 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601 With tri Mixing Machine and Hardener upto 2.50 cm Depth.
17.5
-
500
... More
Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 & 642
14.55
-
112
... More
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
229.55
-
150
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.80.
229.55
-
99
... More
One priming coat and two coat of oil bound distemper on new work including the supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.649 & 650.
131.84
-
92
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.47.1.
97.71
-
123
... More
Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2
7.2
-
363
... More
Providing and fixing white Vitreous water closet squating pan (Indian type W.C.pan) of size 580x440 mm with intergral type foot resrts with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C.flushing cistern,including flush pipe,with manually controlled device (handle lever) conformin to IS:7231,with all fittings and floors complete,including cutting and making good the walls and floors wherever required as per DSR 17.1.1
1
-
6319.7
... More
Providing and fixing wash basin with C.I.brackets,15mm C.P.brass pillar taps.32mm C.P.brass waste of standard pattern,including painting of fitting and brackets,cutting and making good the walls wherever require.White Viterous China flat back wash basin size 550x400mm with single 15mm C.P.brass pillar tap as per DSR-17.7.4
1
-
5540.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.18.7.2
Internal work - Exposed on wall 20 mm nominal outer dia Pipes
10
-
192.31
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 18.8 15 mm nominal outer dia Pipes
10
-
279.74
... More
Providing and fixing 15 mm dia nominal bore brass bib cock of approved quality as per DSR-18.15.1
2
-
635.1
... More
Providing and fixing 15 mm nominal bore brass stop cock of approved quality
4
-
635.1
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipes but without fittings and base support for tank
500
-
11.9
... More
Providing and fixing CP brass long body 15 mm nominal bore dia bib cock of approved quality conforming to IS standards and weighting not less than 690gms.
1
-
649.6
... More
Providing & fixing 125 mm nominal dia circular type with 25 mm waste hole grating of approved quality and colour.
2
-
104.1
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
273.12
-
125
... More
Construction of embankment with approved material obtain from availble land as per permitted and approved by Engineer in charge and as per technical spesification clause 301.3,4,1 with all lift and leads spreading , gradding to required slope and compecting to meet requirement of table 300.1 and 300.2 as per technical spesification clause 301.5
130.08
-
286.4
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand : 8 40 mm nominal size Brick Ballast) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
172.2
-
4400
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.288.
32.96
-
9600
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
18.72
-
10700
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
93.92
-
10200
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
110.08
-
5850
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
15.64
-
6000
... More
M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.303,309 & 310
27.92
-
6690
... More
Brick soling with straight over burnt bricks (M-150) laid on edge and dry labour only including preparation of sub-grade to prescribed camber filling joints with local earth spreading binding coat 1 cm. 3/8" depth of 'local earth over the entire surface .
650.34
-
497.3
... More
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
12277.58
-
74.5
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
142.88
-
6150
... More
4.0 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601 With tri Mixing Machine and Hardener upto 2.50 cm Depth.
255.44
-
500
... More
Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 & 642
650.9
-
112
... More
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
262.08
-
150
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.80.
511.68
-
99
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.47.1.
511.68
-
123
... More
Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and
shape wherever required.
793.2
-
395.1
... More
Providing and fixing ridges and hips in fibre cement reinforced by organic fibresand/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.Corrugated serrated adjustable ridges
113.2
-
380.3
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheetgutter with iron brackets 40x3mm size, bolts, nuts and washers etc., includingmaking necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m²
339.6
-
694.1
... More
Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2
128
-
363
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
44.57
-
125
... More
Construction of embankment with approved material obtain from availble land as per permitted and approved by Engineer in charge and as per technical spesification clause 301.3,4,1 with all lift and leads spreading , gradding to required slope and compecting to meet requirement of table 300.1 and 300.2 as per technical spesification clause 301.5
64.44
-
286.4
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand : 8 40 mm nominal size Brick Ballast) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
27.9
-
4400
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.288.
5.35
-
9600
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
3.78
-
10700
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
4.72
-
10200
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
24.66
-
5850
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
2.24
-
6000
... More
M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.303,309 & 310
45.15
-
6690
... More
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
588.21
-
74.5
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
13.59
-
6150
... More
4.0 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601 With tri Mixing Machine and Hardener upto 2.50 cm Depth.
200.21
-
500
... More
Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 & 642
101.99
-
112
... More
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
463.4
-
150
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.80.
463.4
-
99
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.47.1.
220.4
-
123
... More
One priming coat and two coat of oil bound distemper on new work including the supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.649 & 650.
243
-
92
... More
Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and
shape wherever required.
116.11
-
395.1
... More
Providing and fixing ridges and hips in fibre cement reinforced by organic fibresand/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.Corrugated serrated adjustable ridges
15.69
-
380.3
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheetgutter with iron brackets 40x3mm size, bolts, nuts and washers etc., includingmaking necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m²
47.07
-
694.1
... More
Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2
20
-
363
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
8
-
125
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand : 8 40 mm nominal size Brick Ballast) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
16
-
4400
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
5.8
-
10200
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
12
-
5850
... More
Brick soling with straight over burnt bricks (M-150) laid on edge and dry labour only including preparation of sub-grade to prescribed camber filling joints with local earth spreading binding coat 1 cm. 3/8" depth of 'local earth over the entire surface .
120
-
497.3
... More
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
24
-
150
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.47.1.
45.6
-
123
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipes but without fittings and base support for tank
10000
-
11.9
... More
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
2000
-
74.5
... More
Providing and Fixing G.I. Pipe complete with G.I Pipe with Fittings including trenching and refiling etc 40 mm dia nominal bore
40
-
403.19
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.18.7.2
Internal work - Exposed on wall 15 mm dia
52
-
169.28
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.18.7.2
Internal work - Exposed on wall 20 mm dia
71
-
211.71
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.18.7.2
Internal work - Exposed on wall 25 mm dia
78
-
305.13
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
18.76
-
125
... More
Add extra to above SI No.251 for every additional lift 1.50 m or every additional lead 50m as per SI No.254
6.25
-
20
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 including supply of all materials,labour and T & P etc.required for proper completion of the work and curing complete including cost of form work in foundation and floors as per SI No.281.
2.01
-
10200
... More
Providing and laying in cement concrete 4:2:1 of not less than stength of M-150 stone ballast(20mm nominal size)2 approved coarse sand:1 cement and curing complete including cost of form work in foundation and floors as per SI No.279(b).
0.19
-
9600
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
6.85
-
5850
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
2.19
-
6000
... More
12 mm thick plaster with cement and coarse sand in 1:3 with water proofing compound including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.583.
250
-
250
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in slabs excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.284.
1.2
-
10600
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
0.94
-
6150
... More
Supply and laying of 40 mm gauge over burnt brick ballast including all materials,labour and T&P etc.for proper completion of the work.
4.7
-
1250
... More
Providing M.S.foot rest including fixing with 20 x20 10 cm cement concrete block 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design with 20x20 mm sq.bars.
6
-
337.6
... More
Providing and fixing S.W.tee at the inlet and outlet of septic tank..
6
-
250
... More
Providing and fixing soil 75 mm dia centifugally cast iron socket & spigot (S & S) pipe as per IS:3989.,waste and vent pipes as per DSR-17.35.1.2
2
-
880
... More
Providing & fixing of 75 mm dia cast iron terminal guard.
1
-
330
... More
Providing and fixing in position precast RCC man hole cover and frame Circular shape 560 mm internal diameter with L.D.-20 of required shape and approved quality.
1
-
1600
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
29.4
-
125
... More
Construction of embankment with approved material obtain from availble land as per permitted and approved by Engineer in charge and as per technical spesification clause 301.3,4,1 with all lift and leads spreading , gradding to required slope and compecting to meet requirement of table 300.1 and 300.2 as per technical spesification clause 301.5
289.41
-
110
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand : 8 graded Brick Ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
14.7
-
4400
... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per (MORD) Technical Specification Clause 401.
73.5
-
4618.3
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
33.81
-
6000
... More
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
122.5
-
150
... More
Sand filling in plinth under floors including lead upto 50m and lift upto 1.50m including materials,labour and T&P for proper completion of the work as per SI No.255
18.38
-
810
... More
P/L of 80mm thick Rubber Moulded Zig-Zag Reflective interlocking Tiles with sand filling including supply of all materials labour & T&P etc all complete.
735
-
898
... More
PCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:2:4 in bed plates excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.279.
5.27
-
9600
... More
Wiring point for two ways light with 1 sq. mm.FRLSH PVC insulated multistrandsingle core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuitywire and two numbers two ways piano type switches & ceilingrose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc, complete in all
16
-
825
... More
Add for light/ fan points with modulartype switch in place of piano
type switch
16
-
125
... More
Supply and wiringof submainwith two number 4 sq.mm. FRLSH
PVC insulated 1100 V grade multistrand single core copper
conductor cable in 20 mm dia heavy guage rigidsteel conduit partly concealed in wall and partly laid in slab alongwithreinforcement before concreting, with one number 14 SWG copper earth continuitywire includingmatchingcolour wash etc. complete in all
respect.
64
-
210
... More
Supply and fixingof LED Tube Lightwith batten suitablefor up
to 1 X 22 watt LED tube light complete includingtube etc on
surface complete in all respect. AAA
16
-
1820
... More
S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.
1
-
4200
... More
S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve
5
-
250
... More
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve
1
-
2210
... More
) S&F single pole MCB blanking plate
5
-
25
... More
Supply and fixingof switch box made up of 16 SWG (1.5 mm) thick M.S.sheet of 175 x 100 x 65mm size duly painted with red oxide primer and flushedin wall includingcuttingof brick work, fixingit to the level with cement sand mortar, includingmatchingcolour wash with s/o all materials, labour and T&P required for proper completionof work as directed at site by the Engineerin charge.
2
-
90
... More
Supply and fixingof switch box made up of 16 SWG (1.5 mm) thick M.S.sheet of 175 x 100 x 65mm size duly painted with red oxide primer and flushedin wall includingcuttingof brick work, fixingit to the level with cement sand mortar, includingmatchingcolour wash with s/o all materials, labour and T&P required for proper completionof work as directed at site by the Engineerin charge.
2
-
90
... More
Supply and burying of 600 mm x 600 mm x 3.0 mm copper plate,vertically for earthing with its top atleast 3 mts.below ground level complete with 20 mm dia G.I.pipe and funnel for watering and one earthing leads of two no.8 to 10 SWG copper wire in 15 mm dia G.I.pipe upto switch board ( from apron to switch board the cost of G.I.pipe and copper wire will be extra) 30 cm square C.I.frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc.complete in all respects as per SI.No.704.
1
-
8535
... More
Supply and burying earth electrode for lighting conductor of 600 mm x 600 mm x 3.0 mm copper plate,vertically with its top atleast 3 metres below ground level complete with 20 mm dia G.I.pipe for watering funnel,30 cm square C.I.frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc.as per directions of Engineer-in-charge complete in all respects as per SI.No.708.
1
-
10150
... More
Supply and fixing of one number 8 SWG G.I.wire in 15 mm dia G.I.pipe for earthing,laid in ground or in wall duly concealed including the cost of cement,sand labour, T&P other material required for proper copletion of the work as pe SI.No.721.
20
-
200
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground levelover a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in allrespect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc16 sq. mm 4 core
25
-
376
... More
Supply and fixingof brass nickleplated compressiongland for PVC insulated& armoured served sheathed, undergroundcable including rubber ring etc. complete in all respect. The armouringof the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 sq. mm 4 core
2
-
100
... More
Supply and fixingof plainor pin type copper tin plated cable socket( lug ) to the cable leads, insulatingwith tape and makingconnectionetc. complete in all respect as per direction of the EngineerIncharge.16 sq. mm
2
-
21
... More
Wiring point for two ways light with 1 sq. mm.FRLSH PVC insulated multistrandsingle core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuitywire and two numbers two ways piano type switches & ceilingrose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc, complete in all
5
-
825
... More
Wiring point for fan / fresh air fan (light duty exhaust fan) with 1
sq.mm.FRLSH PVC insulated multistrand single core copper
conductor cable in heavy guage rigidsteel conduitpartly concealed in
wall and partly laid in slab alongwith the reinforcement before
concreting, complete with 14 SWG copper earth continuitywire,
piano type switch& ceilingrose on 3 mm. thick backelite sheet etc.,
complete in allrespect includingmatchingcolour wash.
1
-
780
... More
Wiring point for plug with 1 sq. mm.FRLSH PVC insulated
multistrandsinglecore copper conductor cable in heavy guage rigid
steel conduitpartly concealed in wall and partly laid in slab alongwith
the reinforcement before concreting,complete with14 SWG copper
earth continuity wire and piano type switch and socket etc.,
complete in allrespect includingmatchingcolour wash.
1
-
340
... More
Add for light/ fan points with modulartype switch in place of piano
type switch
1
-
125
... More
Add for plug point with modularswitch & socket in place of piano
type switch& socket.
1
-
215
... More
Add for HPMV/Exhaustfan point with modulartype switch in place
of piano type switch.
1
-
125
... More
Supply and wiringof submainwith two number 4 sq.mm. FRLSH
PVC insulated 1100 V grade multistrand single core copper
conductor cable in 20 mm dia heavy guage rigidsteel conduit partly concealed in wall and partly laid in slab alongwithreinforcement before concreting, with one number 14 SWG copper earth continuitywire includingmatchingcolour wash etc. complete in all
respect.
32
-
210
... More
Supply and fixingand concealingof 20 mm dia. 16 SWG (1.5 mm.)
thick rigid steel conduit pipe in the wall includingcutting of brick
work, layingof conduit and fixing it with M.S. hooks and then
plastering with cement, sand mortar finished to the level, with
matching colour wash includingcost of proper threading of the
conduit& providingnecessary socket, bends and chuck nuts and as
directed by the Engineer in charge with the supply of all material
labour and T&P required for proper completionof work.
40
-
210
... More
Erectionand testingof ceilingfan and regulatorfor room heightupto
3.5 metres includingsupply of 3mm thick G.I.Pipe19mmdia. Duly
painted, complete in allrespect.
1
-
135
... More
Erection and testingof exhaustfan on the existinghole with suitable
size of rag bolts, nuts and washers etc., complete in allrespect.
1
-
130
... More
Supply and fixinghexagonalfan box with hexagonalside of approx
80mm in length fabricated from 16 SWG MS sheet incorporating
10mm dia. M.S. round bar duly bent for supportingfan hanger duly
painted with red oxide and screwing arrangement with wiring
conduit laid in the R.C.C. roof before concreting alongwithsupply
of all material,labour, T&P etc. required for proper completionof
the work.
1
-
135
... More
Supply and fixingof electronicfan regulator(Modular) 120-280 V.
ISI marked, on the existing switch board including making
connections, required material, labour T&P etc. for proper
completion of work to the satisfaction of Engineer in charge of
work
1
-
675
... More
Supply and erection of BEE 5 star 1200 mm sweep ceiling fan with fan motor of A.C.Permanent insulation,capacitor rating conforming BEE 5 Star rating and IS:374/79mand also comply with IS:1709/1984 with latest amendment.The rated voltage 220/240 volts,50 Hz,1-ph AC the fan assemble should consists of down rod blades,shackle canopies etc and with double ball bearing system as per SI.No.1501(i).
1
-
1800
... More
Supply and fixingof LED Tube Lightwith batten suitablefor up
to 1 X 22 watt LED tube light complete includingtube etc on
surface complete in all respect.
2
-
1820
... More
S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.
1
-
4200
... More
S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve
1
-
250
... More
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve
1
-
2210
... More
) S&F single pole MCB blanking plate
1
-
25
... More
Supply and burying of 600 mm x 600 mm x 3.0 mm copper plate,vertically for earthing with its top atleast 3 mts.below ground level complete with 20 mm dia G.I.pipe and funnel for watering and one earthing leads of two no.8 to 10 SWG copper wire in 15 mm dia G.I.pipe upto switch board ( from apron to switch board the cost of G.I.pipe and copper wire will be extra) 30 cm square C.I.frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc.complete in all respects as per SI.No.704.
1
-
8535
... More
Supply and burying earth electrode for lighting conductor of 600 mm x 600 mm x 3.0 mm copper plate,vertically with its top atleast 3 metres below ground level complete with 20 mm dia G.I.pipe for watering funnel,30 cm square C.I.frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc.as per directions of Engineer-in-charge complete in all respects as per SI.No.708.
1
-
10150
... More
Supply and fixing of one number 8 SWG G.I.wire in 15 mm dia G.I.pipe for earthing,laid in ground or in wall duly concealed including the cost of cement,sand labour, T&P other material required for proper copletion of the work as pe SI.No.721.
20
-
200
... More
Supply and fixingof plainor pin type copper tin plated cable socket( lug ) to the cable leads, insulatingwith tape and makingconnectionetc. complete in all respect as per direction of the EngineerIncharge.16 sq. mm
1
-
21
... More
Supply and fixingof A/c 230/250 Volts 50 Hz Exhast fans including all 300 mm Sweep
1
-
1765
... More
S/F of Bulb
2
-
250
... More
Wiring point for two ways light with 1 sq. mm.FRLSH PVC insulated multistrandsingle core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuitywire and two numbers two ways piano type switches & ceilingrose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc, complete in all
10
-
825
... More
Add for light/ fan points with modulartype switch in place of piano
type switch
10
-
125
... More
Supply and wiringof submainwith two number 4 sq.mm. FRLSH
PVC insulated 1100 V grade multistrand single core copper
conductor cable in 20 mm dia heavy guage rigidsteel conduit partly concealed in wall and partly laid in slab alongwithreinforcement before concreting, with one number 14 SWG copper earth continuitywire includingmatchingcolour wash etc. complete in all
respect.
54
-
210
... More
Supply and fixingof LED Tube Lightwith batten suitablefor up
to 1 X 22 watt LED tube light complete includingtube etc on
surface complete in all respect.
8
-
1820
... More
S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.
1
-
4200
... More
S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve
2
-
250
... More
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve
1
-
2210
... More
) S&F single pole MCB blanking plate
5
-
25
... More
Supply and fixingof switch box made up of 16 SWG (1.5 mm) thick M.S.sheet of 175 x 100 x 65mm size duly painted with red oxide primer and flushedin wall includingcuttingof brick work, fixingit to the level with cement sand mortar, includingmatchingcolour wash with s/o all materials, labour and T&P required for proper completionof work as directed at site by the Engineerin charge.
2
-
90
... More
Supply and burying of 600 mm x 600 mm x 3.0 mm copper plate,vertically for earthing with its top atleast 3 mts.below ground level complete with 20 mm dia G.I.pipe and funnel for watering and one earthing leads of two no.8 to 10 SWG copper wire in 15 mm dia G.I.pipe upto switch board ( from apron to switch board the cost of G.I.pipe and copper wire will be extra) 30 cm square C.I.frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc.complete in all respects as per SI.No.704.
1
-
8535
... More
Supply and burying earth electrode for lighting conductor of 600 mm x 600 mm x 3.0 mm copper plate,vertically with its top atleast 3 metres below ground level complete with 20 mm dia G.I.pipe for watering funnel,30 cm square C.I.frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc.as per directions of Engineer-in-charge complete in all respects as per SI.No.708.
1
-
10150
... More
Supply and fixing of one number 8 SWG G.I.wire in 15 mm dia G.I.pipe for earthing,laid in ground or in wall duly concealed including the cost of cement,sand labour, T&P other material required for proper copletion of the work as pe SI.No.721.
20
-
200
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground levelover a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in allrespect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc16 sq. mm 4 core
18
-
376
... More
Supply and fixingof brass nickleplated compressiongland for PVC insulated& armoured served sheathed, undergroundcable including rubber ring etc. complete in all respect. The armouringof the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 sq. mm 4 core
2
-
100
... More
Supply and fixingof plainor pin type copper tin plated cable socket( lug ) to the cable leads, insulatingwith tape and makingconnectionetc. complete in all respect as per direction of the EngineerIncharge.16 sq. mm
2
-
21
... More
S/F of Bulb
2
-
250
... More
Transportation chage of rig Machin cramp shifting and assesroies
1
-
8000
... More
Making water arrangment charges for the construction of TW during drilling
1
-
3000
... More
Drilling of 300 mm dia Bore Hole in slluvium strata by revers rig Machin
65
-
750
... More
Cost of PVC casing Pipe 200 mm Dia
30
-
700
... More
Cost of PVC ribbed strainer pipe 100 mm dia
30
-
600
... More
Cost of PVC casing Pipe100 mm dia
25
-
450
... More
Cost of PVC well Cam 150 mm Dia
1
-
200
... More
Cost of PVC End Cap 100mm dia
1
-
125
... More
Cost of PVC Reducer 150mm dia
1
-
1200
... More
cost Pea gravel 2mm to 3.35mm sige
4.75
-
3500
... More
Lowaring od assambling with transportation
1
-
4200
... More
transportation charges of compressar and its accerories with installation
1
-
2000
... More
Devlopment by air compressar 200 to 250 PSI
8
-
1450
... More
S/F of Bentonite
6
-
300
... More
Providing and fixing of Solar submercible pump standerd with control panal and suort wire
1
-
210000
... More
Providing and fixing 3 core PVC insulated coper submercible 2.5 mm squir
30
-
165
... More
Providing and fixing G.I.Column Pipe 50 mm dia C class with fitting with riser pipe
20
-
350
... More
Providing and fixing TW accessories i.e. well crap camp band nur bolt packing etc
1
-
2000
... More
Providing and fixing Gate Valve
1
-
750
... More
Fixing testing and commissing of ump set with lowring and electric wiring with starter etc all complete
1
-
3000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements