Municipal Corporation Tender

Tree Ring is a light fixture that is designed to attach to a tree by encircling the trunk or a branch. It usually accommodates up to many lights that can be pointed in varying degrees of rotation. Tree rings are a must-have for landscape lighting designs. MS Flat – 1” Circle Diameter - 4’ Waterproof Neon strip light both side ❖Customizable – Yes ❖Material :MS ❖Color – Warm white light and As per directions of Engineer-In-Charge with 3 years warranty.

Supply & erection of Bolard with laser cut & pattern arrangement. Bollard Wattages: 15W ,Nominal Voltage: 240V,Color Temperature: 3000K, 150mm pipe dia ,Surge Protection: 4.5kV built-in driver,Height : 900mm ,Graphite Grey Powder Coated MS Body . Length of the bollard 900 mm. Specialy design bollard and design will be approved by authority. Symmetrical light distribution. Luminaire made of square extruded aluminium, aluminium components and non corrosivestainless steel fasteners. Inner toughened clear glass. Bespoke laser cutting design options. Pressure die cast aluminium mounting plate square 250 x 4mm or above thick with 3 elongated holes 20 x 12 to suit M10 bolts at PCD 90 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP54. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K / 6500K. Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz singlephase ac supply. Driver efficiency 85%, Power factor 0.9, THD 10%, Surge protection 2.5KV. Luminaire dimension : 150mm square x 910mm height. CE & BIS Certified(Including Defect Liability period of 1 Year)

S/f of LED/Wire/Slip Circuit Board/Sensor & Lighting function 5 led to 10 led/meter all colors skirting water proof 100% repairable1 year warranty led skirting light 100 only 4-5 watt power consumption Make in India products. Including All necessary machinery and equipments as per T&C. Proper Completion of work in all respect as per direction by Engineer-in-Charge

Artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated deer shaped sculpture (Male, Female and Baby deer) . These should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Size of the set should be 180 x 140 x 60cm, 160 x 140 x 60cm and 150 x 130 x 60cm. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt. Bidder should submit the Design Registration Certificate / Representation sheet of the product from Government of India at the time of Bid. with 3 years warranty.

Artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Horse shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Horse should be 6 feet x proportionate length. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt. with 3 years warranty.

Artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Pegasus shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Pegasus should be 6 feet x proportionate length. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt.with 3 years warranty.

Artistic a pair of animals form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Swans shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Swans should be minimum 2 feet. DC24V IP67 LED Driver should be provided seperately for each pair of animal. Each animal should be installed on concrete base structure using anchor bolt.with 3 years warranty.

Artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Squirrel shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Squirrel should be minimum 2 feet. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt. with 3 years warranty.

Artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Rabbit shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Rabbit should be minimum 2 feet. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt.with 3 years warranty.

Artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Peacock shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Size of the Peacock should be minimum 4 feet height x proportionate width. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt. with 3 years warranty. Bidder should submit the Design Registration Certificate / Representation sheet of the product from Government of India at the time of Bid.

Artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Tiger shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Tiger should be minimum 3 feet x proportionate width. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt. Bidder should submit the Design Registration Certificate / Representation sheet of the product from Government of India at the time of Bid.with 3 years warranty.

SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Lion shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Lion should be minimum 4 feet x proportionate width. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt.with 3 years warranty

Artistic bird form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Crane (Model 2) shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. The sculpture should be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the bird form. Height of the Crane should be minimum 3 feet x proportionate width. DC24V IP67 LED Driver should be provided seperately for each bird sculpture. Each bird sculpture should be installed on concrete base structure using anchor bolt.with 3 years warranty.

Selfie Point made in ACP sheet of 3 mm thickness with embellishment of the desired colour. This artistic element should have artistic shape of spread feathers of width 9 feet in the desired colour material. Centre point stand to be given for ease of visitor to take desired selfies. Homogeneous tube made with LED light to be used to embellish the wings of the selfie point. Height of the structure to be 6 feet. Structure to be of suitable strength so that it can stand on its own. Structure to be fixed on strong civil foundation at the bottom as per site suitability. Selfie Point should be provided with constant voltage DC24V LED Driver. Bidder should submit the Design Registration Certificate / Representation sheet of the product from Government of India at the time of Bid. with 3 years warranty.

Applicable G.S.T. @ 18% of Rs. 25193620.00