Municipal Corporation Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Municipal Corporation Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Mar 2024
Closing Date8 Apr 2024
Tender Amount₹ 1,56,83,000
Costs
EMD
₹ 3,14,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NNAMC_919335_1Bid Award Id
ViewTender No
ASPIRATIONALTender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://http://allahabadmc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Sand filling in the plinth including supply of necessary quality of sand from a distance not exceding 8.00 Km from the site of work and including watering and dressing etc. Rate Includes cost of material labour and tools and plants etc. required for proper completion of work. DSR 2.27
16.18
30352
1876.14
Providing & injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc., complete (plinth area of the building at ground floor only shall be measured as per IS-6313 Part II 1981)Aldrine emulisifiable concentrate or any other approved material such as Hepthachlor or Chlordance will be used. The rate of application of chemical emulsion shall be as follows (1) Treatment for masonary & foundation 5 Ltr. per Sqm. (II) Back fill in immediate contact with foundation 7.5 Ltr.per Sqm. (III) Treatment of top surface of plinth filling 5 Ltr.per Sqm. (IV) Treatment of soil along external peri meter of
135.9
29626
218
RC.C. work with cement, approved arse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. As per 5.1. No. 284A
41.51
386043
9300
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured. As per s.i.no. 504
32.59
202058
6200
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is one brick (230) mm) ded for RCC column and beam
33.38
201047
6023
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is Half brick (115 mm) 305+309+310+310A
2.95
18216
6175
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer in-charge. (DSR- 9.117.1) Extruded section profile size 42x50 mm
65.2
18301
280.7
Providing and fixing ISI marked flush door shutters conforming to 15 2202 (Part 1) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
35.56
109741
3086.1
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) (riction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47.x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. | Area of window upto 2.50
1.08
8398
7776.7
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Float glass panes 6.0 mm thick glass panes (DSR-9.7.7.2)
1.08
2091
1936.9
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm, all complete. With 12 mm mild steel U beading. (DS.R. 9.135.2)
1.08
1135
1051.75
12 mm thick plaster with cement mortar inproportion of 1:6 cement and F/sand over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper, comletion of work. As per 586
525.74
76232
145
6mm plaster on ceiling including chipping of CC/RCC surface before plastering in cement mortar of mix 1:3 (1 cement: 3 Fine sand) (Not Less than in 1.25 FM)
91.74
16971
185
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
387.95
549589
1416.65
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R. 13.80 (Nos 19+20)
91.74
11284
123
One priming coat of cement primer and two coats oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (S.I. No. 649 +651)
91.74
9449
103
Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR 13.45.1)
65.6
16072
245
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. (DSR 11.56.2)
72.19
169445
2347.22
Stone tile (polished) work for vali lining over 12mm thick bed of roment mortar 1:3 (1 cement: 3 coarse sand) and cement slurry # 3.3 kg/sa including pointing in white cement complete. (DSR 8.9.1.2) 8MM THICK GRANITE TILES FOR WALL CLADDING
113.94
310200
2722.49
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. 12.22
6
1599
266.6
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to 15:5382, leaving 10 mm gap for thermal expansion, (1) Single socketed pipes. (110 mm diameter) D.S.R. 12.41.2
18
5755
319.75
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (a) Single push fit Coupler 110 mm
6
663
110.6
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (b) Bend 87.50 110 mm bend. D.S.R. 12.42.5.2
6
792
132
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (c) Shoe plain 110 mm D.S.R. 12.42.62
6
695
115.95
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. D.S.R. 12.43.2
6
1857
309.5
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. D.S.R. 12.44
6
287
47.9
Roof Work (Water Profing Treatment) Standard Water Proofing - Methodology Cleaning the Surface of all loose material, dirt & Grit, Coating exposed slab surface with Water Proofing chemical as instructed by Engineer in charge. Top coat cover in M15 Cement concrete with 8mm Aggregate, with a minimum thickness of 50mm and laid to gradient to drain of all 31 surface water.
91.74
65364
712.5
External works Providing & Fixing of Signages with light, as per direction of engineer-in-charge.
1
23000
23000
Providing & Fixing of mild steel Gate as per Design, including applying pimer, enamel paint & direction of engineer-in-charge.
1
18500
18500
Sanitary Items Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to 15: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
18
69300
3850
Providing and fixing white vitreous china pedestal Type water cdoset (European Type W.c pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever conforming to 157231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
2
7600
3800
Providing and fixing white vitreous china Fat back or wall corner type lipped front urinal besin of 30-260-350 mm and 340-410-265 mm sars respectively with autamatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required (a) One urinal basin with 5 litre white P.V.C. sutomatic flushing cistern
2
6000
3000
Providing and fixing wash basin with CI brackets, 15 mm C.P. brass pillar taps 12 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (b) White Vitreous China Wash basin size 630×450 mim with a single 15mm CP. brass pillar tap
4
8000
2000
S/F of Fresh air fan with complete set made of 44 haja having 12 dia
10
14250
1425
P/F of URINAL Divider made of 20 mm thick 45 block granite slab
3
5164
1721.6
Providing and fixing CP. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15mm Bore
40
26737
668.43
Providing and fing 16 mm M.S. Tan clamps of standard shape and size in existing RCC vah including cutting chase, anchoring dame to reinforcement bar, including cleaning, refilling making good the chase with matching concrete. plastering and painting the exposed portion of the clamps complete
4
1000
250
S/F of ceilling fan with complete set made of 49 baisy hoang 48" da
4
5800
1450
If 600 x 400 mm bevelled edge mirror
4
3536
884.1
P/F MS (RHS 160*80*5) fabricated canopy complets with fixing and painting at Entrance
1000
125000
125
Terracotta clay tiles for Visual Screen & Ventilation
8.4
61320
7300
Add for UPVC Plumbing & SWR Sanitary Lines Sintex water TANKS, GATE vaives etc 10%
1
272442
272442.78
Add For Electrification 5%
1
136221
136221.39
Add for dismantelling & removal works of plaster & Masonary
1
40000
40000
Ded. Cost for scrap useable materials
1
-30000
30000
ADD for borwell 150dia depth upto90m with 2Hp sumberciable pump etc all complete as per attached details
1
141000
141000
Clearing of Grass and Removal of rubbish upto distance or 30 m out side the pherriphery of the area as per technical specification clause 201.
150
1204
8.03
Excavation in foundation in ordinary soil (Loam, day or sand) including lift upto 1.50m and lead upto 30m. and including filling watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge. As per S.I. No. 251
88.99
14238
160
Earth work in filling plinth with cartage earth AR-1
51.3
25296
493.1
Concrete with 40mm gauge Stone ballast, 8:4:1 In foundation Including supply of all materials labour and tools and plants etc. required for proper completion of work. As per SL 281
3.8
18620
4900
Sand filling in the plinth including supply of necessary quality of sand from a distance not exceding 8.00 Km from the site of work and including watering and dressing etc. Rate Includes cost of material labour and tools and plants etc. required for proper completion of work. DSR 2.27
4.62
8667
1876.14
Providing & injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc., complete (plinth area of the building at ground floor only shall be measured as per IS-6313 Part II 1981)Aldrine emulisifiable concentrate or any other approved material such as Hepthachlor or Chlordance will be used. The rate of application of chemical emulsion shall be as follows (1) Treatment for masonary & foundation 5 Ltr. per Sqm. (II) Back fill in immediate contact with foundation 7.5 Ltr.per Sqm. (III) Treatment of top surface of plinth filling 5 Ltr.per Sqm. (IV) Treatment of soil along external peri meter of
116.17
25325
218
R.C.C.Work with cement approved coarse sand and 2cm gauge stone girt (Dala) in the propotion of 1:1.5:3 (M-20) in Column Footing excluding supply of reinforcement and its bending but including fixing and bending the same with 24
B.W.G.G.I. banding wire and including necessary centering and shuttring etc.& also including supply of all materilas, labour and T&P etc. required for proper completion of work. As per S.I.No.287A
15.8
139040
8800
R.C.C. work with cement, approved coarse sand and 20 mm gauge stone aggrigate with M-20 nominal mix 1:1.5:3 in Plinth Band & excluding the supply of reinforcement and its bending but including its fixing and binding with 24 BWGGI binding wire, centering and shuttering, supply of all materials, labour and tools and plants etc. required for proper completion of work. As per S.I.No. 283
2.65
22525
8500
R.C.C. Work with cement approved coarse sand and 20 mm gauge (nomianl size) dalla stone aggregate in the proporation of 1:1.5:3 M-20 in R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B W.G.G.I. binding wire and as required supply of all materials, labour centering and shuttering and removal of the same after completion of work. S.I. No. 289
8.8
90640
10300
R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. T-Beam excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. As per S.I. No. 288
13.99
153890
11000
RC.C. work with cement, approved arse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. As per 5.1. No. 284A
24.89
231477
9300
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured. As per s.i.no. 504
61.62
382044
6200
M-150 class brick work in 1:4 and C/sand mortar in foundation and plinth including supply of all materials, etc all complete work
2.41
13014
5400
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is one brick (230) mm) ded for RCC column and beam
25.53
153767
6023
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is Half brick (115 mm) 305+309+310+310A
12.89
79595
6175
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer in-charge. (DSR- 9.117.1) Extruded section profile size 42x50 mm
79.8
22399
280.7
Providing and fixing ISI marked flush door shutters conforming to 15 2202 (Part 1) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
24.19
74652
3086.1
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) (riction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47.x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. | Area of window upto 2.50
11.19
87021
7776.7
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Float glass panes 6.0 mm thick glass panes (DSR-9.7.7.2)
11.19
21673
1936.9
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm, all complete. With 12 mm mild steel U beading. (DS.R. 9.135.2)
11.19
11769
1051.75
EXTERIOR 12 mm cement plaster of mix (1:4 (1 cement: 4 coarse sand)) over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper,
95.33
29290
307.25
12 mm thick plaster with cement mortar inproportion of 1:6 cement and F/sand over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper, comletion of work. As per 586
84.17
12204
145
6mm plaster on ceiling including chipping of CC/RCC surface before plastering in cement mortar of mix 1:3 (1 cement: 3 Fine sand) (Not Less than in 1.25 FM)
108
19980
185
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
286
405161
1416.65
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R. 13.80 (Nos 19+20)
179.5
22078
123
One priming coat of cement primer and two coats oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (S.I. No. 649 +651)
179.5
18488
103
Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR 13.45.1)
95.33
23355
245
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. (DSR 11.56.2)
62.03
145598
2347.22
Stone tile (polished) work for vali lining over 12mm thick bed of roment mortar 1:3 (1 cement: 3 coarse sand) and cement slurry # 3.3 kg/sa including pointing in white cement complete. (DSR 8.9.1.2) 8MM THICK GRANITE TILES FOR WALL CLADDING
29.4
80041
2722.49
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. 12.22
4
1066
266.6
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to 15:5382, leaving 10 mm gap for thermal expansion, (1) Single socketed pipes. (110 mm diameter) D.S.R. 12.41.2
16
5116
319.75
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (a) Single push fit Coupler 110 mm
4
442
110.6
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (b) Bend 87.50 110 mm bend. D.S.R. 12.42.5.2
4
528
132
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (c) Shoe plain 110 mm D.S.R. 12.42.62
4
463
115.95
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. D.S.R. 12.43.2
24
7428
309.5
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. D.S.R. 12.44
4
191
47.9
Roof Work (Water Profing Treatment) Standard Water Proofing - Methodology Cleaning the Surface of all loose material, dirt & Grit, Coating exposed slab surface with Water Proofing chemical as instructed by Engineer in charge. Top coat cover in M15 Cement concrete with 8mm Aggregate, with a minimum thickness of 50mm and laid to gradient to drain of all 31 surface water.
108
76950
712.5
Gi Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. D.S.R. 12.54.2
82.65
154638
1871
External works Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
85
37400
440
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).
20
240
12
Providing & Fiving of Signages with light, as per direction of engineer-in-charge.
1
48000
48000
Sanitary Items Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to 15: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
8
30800
3850
Providing and fixing white vitreous china pedestal Type water cdoset (European Type W.c pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever conforming to 157231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
4
15200
3800
Providing and fixing white vitreous china Fat back or wall corner type lipped front urinal besin of 30-260-350 mm and 340-410-265 mm sars respectively with autamatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required (a) One urinal basin with 5 litre white P.V.C. sutomatic flushing cistern
3
9000
3000
Add extra touchless sensor flushing sysyem for Urinals
3
12600
4200
Providing and fixing wash basin with CI brackets, 15 mm C.P. brass pillar taps 12 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (b) White Vitreous China Wash basin size 630×450 mim with a single 15mm CP. brass pillar tap
4
8000
2000
Providing and fixing wash basin with C.1. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(b) White Vitreous China Wash basin size 630×450 mm with a single 15 mm C.P. brass pillar tap
6
12000
2000
Add extra touchless sensor faucets for basins
6
16800
2800
S/F of Fresh air fan with complete set made of 44 haja having 12 dia
12
17100
1425
P/F of URINAL Divider made of 20 mm thick 45 block granite slab
1.04
1790
1721.6
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS: 13983 with C.l. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.
2.04
6560
3216
Providing and fixing CP. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15mm Bore
15
10026
668.43
Providing and fing 16 mm M.S. Tan clamps of standard shape and size in existing RCC vah including cutting chase, anchoring dame to reinforcement bar, including cleaning, refilling making good the chase with matching concrete. plastering and painting the exposed portion of the clamps complete
4
1000
250
S/F of ceilling fan with complete set made of 49 baisy hoang 48" da
4
5800
1450
If 600 x 400 mm bevelled edge mirror
6
5304
884.1
P/F MS fabricated canopy r With acrylic sheet downlight panels and LED panel lightsover Entrance door
13.94
112495
8070
Terracotta clay tiles for Visual Screen & Ventilation
8.4
61320
7300
Add for UPVC Plumbing & SWR Sanitary Lines Sintex water TANKS, GATE vaives etc 10%
1
149559
149559.23
Add For Electrification 5%
1
194427
194427
Clearing of Grass and Removal of rubbish upto distance or 30 m out side the pherriphery of the area as per technical specification clause 201.
150
1204
8.03
Excavation in foundation in ordinary soil (Loam, day or sand) including lift upto 1.50m and lead upto 30m. and including filling watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge. As per S.I. No. 251
88.99
14238
160
Earth work in filling plinth with cartage earth AR-1
51.3
25296
493.1
Concrete with 40mm gauge Stone ballast, 8:4:1 In foundation Including supply of all materials labour and tools and plants etc. required for proper completion of work. As per SL 281
3.8
18620
4900
Sand filling in the plinth including supply of necessary quality of sand from a distance not exceding 8.00 Km from the site of work and including watering and dressing etc. Rate Includes cost of material labour and tools and plants etc. required for proper completion of work. DSR 2.27
4.62
8667
1876.14
Providing & injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc., complete (plinth area of the building at ground floor only shall be measured as per IS-6313 Part II 1981)Aldrine emulisifiable concentrate or any other approved material such as Hepthachlor or Chlordance will be used. The rate of application of chemical emulsion shall be as follows (1) Treatment for masonary & foundation 5 Ltr. per Sqm. (II) Back fill in immediate contact with foundation 7.5 Ltr.per Sqm. (III) Treatment of top surface of plinth filling 5 Ltr.per Sqm. (IV) Treatment of soil along external peri meter of
116.17
25325
218
R.C.C.Work with cement approved coarse sand and 2cm gauge stone girt (Dala) in the propotion of 1:1.5:3 (M-20) in Column Footing excluding supply of reinforcement and its bending but including fixing and bending the same with 24
B.W.G.G.I. banding wire and including necessary centering and shuttring etc.& also including supply of all materilas, labour and T&P etc. required for proper completion of work. As per S.I.No.287A
17.16
151008
8800
R.C.C. work with cement, approved coarse sand and 20 mm gauge stone aggrigate with M-20 nominal mix 1:1.5:3 in Plinth Band & excluding the supply of reinforcement and its bending but including its fixing and binding with 24 BWGGI binding wire, centering and shuttering, supply of all materials, labour and tools and plants etc. required for proper completion of work. As per S.I.No. 283
2.65
22525
8500
R.C.C. Work with cement approved coarse sand and 20 mm gauge (nomianl size) dalla stone aggregate in the proporation of 1:1.5:3 M-20 in R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B W.G.G.I. binding wire and as required supply of all materials, labour centering and shuttering and removal of the same after completion of work. S.I. No. 289
8.8
90640
10300
R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. T-Beam excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. As per S.I. No. 288
13.99
153890
11000
RC.C. work with cement, approved arse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. As per 5.1. No. 284A
24.89
231477
9300
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured. As per s.i.no. 504
61.62
382044
6200
M-150 class brick work in 1:4 and C/sand mortar in foundation and plinth including supply of all materials, etc all complete work
2.41
13014
5400
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is one brick (230) mm) ded for RCC column and beam
27.33
164608
6023
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is Half brick (115 mm) 305+309+310+310A
12.89
79595
6175
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer in-charge. (DSR- 9.117.1) Extruded section profile size 42x50 mm
79.8
22399
280.7
Providing and fixing ISI marked flush door shutters conforming to 15 2202 (Part 1) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
24.19
74652
3086.1
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) (riction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47.x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. | Area of window upto 2.50
11.19
87021
7776.7
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Float glass panes 6.0 mm thick glass panes (DSR-9.7.7.2)
11.19
21673
1936.9
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm, all complete. With 12 mm mild steel U beading. (DS.R. 9.135.2)
11.19
11769
1051.75
EXTERIOR 12 mm cement plaster of mix (1:4 (1 cement: 4 coarse sand)) over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper,
95.33
29290
307.25
12 mm thick plaster with cement mortar inproportion of 1:6 cement and F/sand over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper, comletion of work. As per 586
84.17
12204
145
6mm plaster on ceiling including chipping of CC/RCC surface before plastering in cement mortar of mix 1:3 (1 cement: 3 Fine sand) (Not Less than in 1.25 FM)
108
19980
185
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
286
405161
1416.65
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R. 13.80 (Nos 19+20)
179.5
22078
123
One priming coat of cement primer and two coats oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (S.I. No. 649 +651)
179.5
18488
103
Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR 13.45.1)
95.33
23355
245
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. (DSR 11.56.2)
62.03
145598
2347.22
Stone tile (polished) work for vali lining over 12mm thick bed of roment mortar 1:3 (1 cement: 3 coarse sand) and cement slurry # 3.3 kg/sa including pointing in white cement complete. (DSR 8.9.1.2) 8MM THICK GRANITE TILES FOR WALL CLADDING
29.4
80041
2722.49
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. 12.22
4
1066
266.6
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to 15:5382, leaving 10 mm gap for thermal expansion, (1) Single socketed pipes. (110 mm diameter) D.S.R. 12.41.2
16
5116
319.75
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (a) Single push fit Coupler 110 mm
4
442
110.6
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (b) Bend 87.50 110 mm bend. D.S.R. 12.42.5.2
4
528
132
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (c) Shoe plain 110 mm D.S.R. 12.42.62
4
463
115.95
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. D.S.R. 12.43.2
24
7428
309.5
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. D.S.R. 12.44
4
191
47.9
Roof Work (Water Profing Treatment) Standard Water Proofing - Methodology Cleaning the Surface of all loose material, dirt & Grit, Coating exposed slab surface with Water Proofing chemical as instructed by Engineer in charge. Top coat cover in M15 Cement concrete with 8mm Aggregate, with a minimum thickness of 50mm and laid to gradient to drain of all 31 surface water.
108
76950
712.5
Gi Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. D.S.R. 12.54.2
82.65
154638
1871
External works Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
85
37400
440
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).
20
240
12
Providing & Fiving of Signages with light, as per direction of engineer-in-charge.
1
48000
48000
Sanitary Items Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to 15: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
8
30800
3850
Providing and fixing white vitreous china pedestal Type water cdoset (European Type W.c pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever conforming to 157231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
4
15200
3800
Providing and fixing white vitreous china Fat back or wall corner type lipped front urinal besin of 30-260-350 mm and 340-410-265 mm sars respectively with autamatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required (a) One urinal basin with 5 litre white P.V.C. sutomatic flushing cistern
3
9000
3000
Add extra touchless sensor flushing sysyem for Urinals
3
12600
4200
Providing and fixing wash basin with CI brackets, 15 mm C.P. brass pillar taps 12 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (b) White Vitreous China Wash basin size 630×450 mim with a single 15mm CP. brass pillar tap
6
12000
2000
Providing and fixing wash basin with C.1. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(b) White Vitreous China Wash basin size 630×450 mm with a single 15 mm C.P. brass pillar tap
6
12000
2000
Add extra touchless sensor faucets for basins
6
16800
2800
S/F of Fresh air fan with complete set made of 44 haja having 12 dia
12
17100
1425
P/F of URINAL Divider made of 20 mm thick 45 block granite slab
1.04
1790
1721.6
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS: 13983 with C.l. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.
1
3216
3216
Providing and fixing CP. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15mm Bore
15
10026
668.43
Providing and fing 16 mm M.S. Tan clamps of standard shape and size in existing RCC vah including cutting chase, anchoring dame to reinforcement bar, including cleaning, refilling making good the chase with matching concrete. plastering and painting the exposed portion of the clamps complete
4
1000
250
S/F of ceilling fan with complete set made of 49 baisy hoang 48" da
4
5800
1450
If 600 x 400 mm bevelled edge mirror
6
5304
884.1
P/F MS fabricated canopy r With acrylic sheet downlight panels and LED panel lightsover Entrance door
13.94
112495
8070
Terracotta clay tiles for Visual Screen & Ventilation
5.28
38544
7300
Add for UPVC Plumbing & SWR Sanitary Lines Sintex water TANKS, GATE vaives etc 10%
1
149559
149559.23
Add For Electrification 5%
1
194427
194427
Clearing of Grass and Removal of rubbish upto distance or 30 m out side the pherriphery of the area as per technical specification clause 201.
150
1204
8.03
Excavation in foundation in ordinary soil (Loam, day or sand) including lift upto 1.50m and lead upto 30m. and including filling watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge. As per S.I. No. 251
88.99
14238
160
Earth work in filling plinth with cartage earth AR-1
51.3
25296
493.1
Concrete with 40mm gauge Stone ballast, 8:4:1 In foundation Including supply of all materials labour and tools and plants etc. required for proper completion of work. As per SL 281
3.8
18620
4900
Sand filling in the plinth including supply of necessary quality of sand from a distance not exceding 8.00 Km from the site of work and including watering and dressing etc. Rate Includes cost of material labour and tools and plants etc. required for proper completion of work. DSR 2.27
4.62
8667
1876.14
Providing & injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc., complete (plinth area of the building at ground floor only shall be measured as per IS-6313 Part II 1981)Aldrine emulisifiable concentrate or any other approved material such as Hepthachlor or Chlordance will be used. The rate of application of chemical emulsion shall be as follows (1) Treatment for masonary & foundation 5 Ltr. per Sqm. (II) Back fill in immediate contact with foundation 7.5 Ltr.per Sqm. (III) Treatment of top surface of plinth filling 5 Ltr.per Sqm. (IV) Treatment of soil along external peri meter of
116.17
25325
218
R.C.C.Work with cement approved coarse sand and 2cm gauge stone girt (Dala) in the propotion of 1:1.5:3 (M-20) in Column Footing excluding supply of reinforcement and its bending but including fixing and bending the same with 24
B.W.G.G.I. banding wire and including necessary centering and shuttring etc.& also including supply of all materilas, labour and T&P etc. required for proper completion of work. As per S.I.No.287A
17.16
151008
8800
R.C.C. work with cement, approved coarse sand and 20 mm gauge stone aggrigate with M-20 nominal mix 1:1.5:3 in Plinth Band & excluding the supply of reinforcement and its bending but including its fixing and binding with 24 BWGGI binding wire, centering and shuttering, supply of all materials, labour and tools and plants etc. required for proper completion of work. As per S.I.No. 283
2.65
22525
8500
R.C.C. Work with cement approved coarse sand and 20 mm gauge (nomianl size) dalla stone aggregate in the proporation of 1:1.5:3 M-20 in R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B W.G.G.I. binding wire and as required supply of all materials, labour centering and shuttering and removal of the same after completion of work. S.I. No. 289
8.8
90640
10300
R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. T-Beam excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. As per S.I. No. 288
13.99
153890
11000
RC.C. work with cement, approved arse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. As per 5.1. No. 284A
24.89
231477
9300
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured. As per s.i.no. 504
61.62
382044
6200
M-150 class brick work in 1:4 and C/sand mortar in foundation and plinth including supply of all materials, etc all complete work
2.41
13014
5400
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is one brick (230) mm) ded for RCC column and beam
27.33
164608
6023
M-150 class brick work in 1:4 and C/sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is Half brick (115 mm) 305+309+310+310A
12.89
79595
6175
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer in-charge. (DSR- 9.117.1) Extruded section profile size 42x50 mm
79.8
22399
280.7
Providing and fixing ISI marked flush door shutters conforming to 15 2202 (Part 1) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
24.19
74652
3086.1
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) (riction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47.x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. | Area of window upto 2.50
11.19
87021
7776.7
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Float glass panes 6.0 mm thick glass panes (DSR-9.7.7.2)
11.19
21673
1936.9
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm, all complete. With 12 mm mild steel U beading. (DS.R. 9.135.2)
11.19
11769
1051.75
EXTERIOR 12 mm cement plaster of mix (1:4 (1 cement: 4 coarse sand)) over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper,
95.33
29290
307.25
12 mm thick plaster with cement mortar inproportion of 1:6 cement and F/sand over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper, comletion of work. As per 586
84.17
12204
145
6mm plaster on ceiling including chipping of CC/RCC surface before plastering in cement mortar of mix 1:3 (1 cement: 3 Fine sand) (Not Less than in 1.25 FM)
108
19980
185
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
286
405161
1416.65
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R. 13.80 (Nos 19+20)
179.5
22078
123
One priming coat of cement primer and two coats oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (S.I. No. 649 +651)
179.5
18488
103
Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR 13.45.1)
95.33
23355
245
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. (DSR 11.56.2)
62.03
145598
2347.22
Stone tile (polished) work for vali lining over 12mm thick bed of roment mortar 1:3 (1 cement: 3 coarse sand) and cement slurry # 3.3 kg/sa including pointing in white cement complete. (DSR 8.9.1.2) 8MM THICK GRANITE TILES FOR WALL CLADDING
29.4
80041
2722.49
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. 12.22
4
1066
266.6
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to 15:5382, leaving 10 mm gap for thermal expansion, (1) Single socketed pipes. (110 mm diameter) D.S.R. 12.41.2
16
5116
319.75
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (a) Single push fit Coupler 110 mm
4
442
110.6
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (b) Bend 87.50 110 mm bend. D.S.R. 12.42.5.2
4
528
132
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. D.S.R. 12.42.2.2 (c) Shoe plain 110 mm D.S.R. 12.42.62
4
463
115.95
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. D.S.R. 12.43.2
24
7428
309.5
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. D.S.R. 12.44
4
191
47.9
Roof Work (Water Profing Treatment) Standard Water Proofing - Methodology Cleaning the Surface of all loose material, dirt & Grit, Coating exposed slab surface with Water Proofing chemical as instructed by Engineer in charge. Top coat cover in M15 Cement concrete with 8mm Aggregate, with a minimum thickness of 50mm and laid to gradient to drain of all 31 surface water.
108
76950
712.5
Gi Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. D.S.R. 12.54.2
82.65
154638
1871
External works Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
85
37400
440
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).
20
240
12
Providing & Fiving of Signages with light, as per direction of engineer-in-charge.
1
48000
48000
Sanitary Items Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to 15: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
8
30800
3850
Providing and fixing white vitreous china pedestal Type water cdoset (European Type W.c pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever conforming to 157231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
4
15200
3800
Providing and fixing white vitreous china Fat back or wall corner type lipped front urinal besin of 30-260-350 mm and 340-410-265 mm sars respectively with autamatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required (a) One urinal basin with 5 litre white P.V.C. sutomatic flushing cistern
3
9000
3000
Add extra touchless sensor flushing sysyem for Urinals
3
12600
4200
Providing and fixing wash basin with CI brackets, 15 mm C.P. brass pillar taps 12 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (b) White Vitreous China Wash basin size 630×450 mim with a single 15mm CP. brass pillar tap
6
12000
2000
Providing and fixing wash basin with C.1. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(b) White Vitreous China Wash basin size 630×450 mm with a single 15 mm C.P. brass pillar tap
6
12000
2000
Add extra touchless sensor faucets for basins
6
16800
2800
S/F of Fresh air fan with complete set made of 44 haja having 12 dia
12
17100
1425
P/F of URINAL Divider made of 20 mm thick 45 block granite slab
1.04
1790
1721.6
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS: 13983 with C.l. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.
1
3216
3216
Providing and fixing CP. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15mm Bore
15
10026
668.43
Providing and fing 16 mm M.S. Tan clamps of standard shape and size in existing RCC vah including cutting chase, anchoring dame to reinforcement bar, including cleaning, refilling making good the chase with matching concrete. plastering and painting the exposed portion of the clamps complete
4
1000
250
S/F of ceilling fan with complete set made of 49 baisy hoang 48" da
4
5800
1450
If 600 x 400 mm bevelled edge mirror
6
5304
884.1
P/F MS fabricated canopy r With acrylic sheet downlight panels and LED panel lightsover Entrance door
13.94
112495
8070
Terracotta clay tiles for Visual Screen & Ventilation
5.28
38544
7300
Add for UPVC Plumbing & SWR Sanitary Lines Sintex water TANKS, GATE vaives etc 10%
1
149559
149559.23
Add For Electrification 5%
1
194427
194427
Add GST@18.00%=
1
2392128
2392128
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements