Directorate Of Urban Local Bodies Tender

Deduct cost of old interlocking tiles

first class brick work in 1:4 one cement &four coarse sand of 2.20 F.M.mortar.

12mm thick cement plaster in 1:4 one cement four coarse sand mix mortar

concrete with 4 cm gauge brick ballast fine sand of 1.25 FM and cement in proportion of 1:6:12 in foundation under floors including supply of all material labour tools & plants etc .

S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge

Construction of un reinforced dowel joints at expansion and construction joint only plain cement concrete pavement including of expansion joint

cartage of ballast kankar coal grit or sand including loading & unloading but excluding but excluding stacking on pakka roads lead upto 8km

Retro reflecting sheeting type-X1 with 4mm thick ACM single side providing and Fixing of reflective sign with a corrison resistant 4mm thick 0.4 to 0.5 both side aluminium skin aluminim composite panel face to be fully covered with high intensity prismatic sheeting type IV as per IRC:67:2012 retro reflecting sheeting with back frame MS angle 35*35*5 mm Legends, Letters, numerals and border etc.should be as per MoRTH specification. No.801.3.7 The sheeting shall have a presure sensitive adhesive of the aggressive -tack type requiring no heat, solvent other preparation for adhesion to a clean smooth surface ,in a manner recommended by the sheeting manufacturer. The ACM ( Aluminium composite Materials ) shall be fixed on the back frame MS Angle with riveting .Micro prismatic type IV retro reflecting sheeting confirming to ASTM 04956-09 shall be pressure fixed .The retro reflective Sheeting shall be tested for certificate of having the sheeting tested for coefficient o f retro reflection , daytime colour and luminance ,shrinkage,flexibility,liner removal,adhesion,impact resistance,specular as per direction of in charge Engineer

Deduction cost of brick bats

GST