Directorate Of Urban Local Bodies Tender

Excavation in foundation in ordinary soil( Loam,clay or sand) including lift up to 1.5 M,and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the plinth and removal and disposal of surplush earth as directed by the Engineer-in-charge up to a distance of 30 M from the foundation trenches (Where machine con not reach/move) For building work only,(Excluding royalty)

Earth work in filling upto distance 5.00 km lead with cartage/royalty for levelling dressing including supply of all material,labour and T&P etc.required for proper completion of work

Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5)Treatment of soil along external perimeter of building 7.5 liters/sqm. (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)

Cement Concrete with 4cm gauge approved brick ballast coarse sand and cement in proporation of 1:4:8 inculuding supply of all materail labour and T&P etc.required for proper completion.

M-150 brick work in 1:6 with (one cement and six fine sand of 1.25 F.M mortar) in foundation and plinth inculuding supply of all meterials,labour and T&P etc.reuired for proper complete of work.

M-150 brick work in 1:6 with (one cement and six fine sand of 1.25 F.M mortar) in Superstructure i/c cutting necessary and moulding of brick inculuding supply of all meterials,labour and T&P etc.reuired for proper complete of work.

12mm thick Plaster in 1:4 with cement,coarse sand mortar including supply of all material ,labour and T&P etc.required for proper completion of work

Supply & laying of 8mm thick vetrified tiles 600x600mm size of approved make in flooring including 2.50cm thick base in 1:4 with cement coarse sand mortor with white cement slurry jointing and polishing including supply of all material,labour and T&P etc.required for proper completion of work

Supply & fixing 6mm thick China glazed tiles of first quality at wall or skirtting with 1.3 cement coarse sand mortor with white cement slurry jointing and polishing including supply of all material,labour and T&P etc.required for proper completion of work

Cement concrete with 4cm gague approved stone ballast coarse sand and cement in proporation of 4:2:1 but with 2cm gaguge stone gritt instead of 4cm gauge stone ballast inculding supply of all materials labour and T&P etc for proper completion of work.As par S.I No-279A Ch.-05

R.C.C raft foundation work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:1.5:3 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost.

R.C.C lighter beam having spans upto 6M work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:2:4 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost.

R.C.C columns work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:1.5:3 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost.

Mild steel or iron in plain work such as concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work.

Fabrication of grill and staircase railling 45kg/sqm=0.45qtl/sqm including supply of all material,labour and T&P etc.required for proper completion of work

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm As per S.I. No. 17.25.1

Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and One urinal basin with 5 litre white P.V.C. automatic flushing cistern. As per S.I. No. 17.4.1

Providing and fixing water closet squatting pan (Indian type W.C pan)with 100mm sand cast iron p or strap 10 liter low level white P.V.c flushing cisten with manually controlled device (hand level) conforming to IS 7231 with fittings and Fi

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall : 15 mm dia. nominal bore. As per S.I. No. 18.10.1

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia. nominal bore. As per S.I. No. 18.11.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm dia. nominal bore As per S.I. No. 18.51.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm dia. nominal bore. As per S.I. No. 18.53.1

Providing & fixing rolling Shutter of approved made make of 80x125mm cold rolled MS lath lock including supply of all material ,labour and T&P etc.required for proper completion of work

Supply & fixing of Coil spring for Rolling shutterincluding supply of all material,labour and T&P etc.required for proper completion of work

Supply & fixing of Hood cover for Rolling shutter including supply of all material ,labour and T&P etc.required for proper completion of work

Supply & fixing of Ball bearing for Rolling shutter including supply of all material ,labour and T&P etc.required for proper completion of work

Providing wall Putty on new srface with approved quality materail of berger/J.K/Birla or similar make 2 coat

Applying Oil Bond distempering/ snowcem with primer coatincluding supply of all material ,labour and T&P etc.required for proper completion of work

Applying two coat enaimel paint over one coat primer including supply of all material ,labour and T&P etc.required for proper completion of work

Add Internal & External Electric Fitting @ 8.00%