Directorate Of Urban Local Bodies Tender

12 mm thick plaster 1:4 with one Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)

Cement Concrete with 2.0 cm. gauge Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)

providing laying spreading and compacted 22.40-53 mm graded stone aggregate with fine sand , laying in uniform compacted layers of 100 mm thick with hand roller in sub base/base course on well prepared surface and compacting including all T&P taxes & labour cess etc as directed by engineer in charges etc all. complete as per technical specification clarse 406.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate when thickness of CC is less then 20 cm. (without dowel Bar) (M-30) capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20) including (without dowel Bat) Sl No. 10.29 new item 9(1)

M.S. or iron work in stair case roilling in heavy sizes such as trusses, built up gates, records racks, roof work, Gates etc including rivetting or welding where necessary. (S.I. 502a)

Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked. ch 15 Sl.No.644

As in item (9) above but for every coat after the first coat.ch 15 Sl.No.645

Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.ch 15 Sl.No.660

As in item (9) above but for each coat of water proof cement paint after the first two coat to give an even shade.ch 15 Sl.No.661

Supply and fixing of P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) (4”) internal dia P.V.C. pipes Everest or Charminar make complete As ch 2 item no 30A iv 140+140x10%+20=174.

Supply and fixing of Cast iron Banch upto 1500 mm size decorative stand/legs(NA)(ci) including minimum weight of banch 40 kg etc per market Rate.

S/F Inogration of sign board with all complition.(L.S)

GST 18 %