Directorate Of Urban Local Bodies Tender

R.c.c. footing with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:2:4 in R.c.c. excluding supply of reinforcement.(Chap.15 , S.No.13, S.O.R- 287)

R.C.C. plinth beam in 1:2:4 in cement coarse sand and 40 mm gauge grit stone ballast prepared subgrade complete in all.As per S.l no 10 sch 285

R.c.c. column work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:2:4 in R.c.c. excluding supply of reinforcement.(As per S.l no 14 sch 288)SOR

First class Brick Work in 1:4 cement and fine sand of 1.25 finesand modulous mortar in foundation and plinth including supply of all materials, labour , tools and plants etc. required for proper completion of the work.(As per S.l no.1, 303 sch of SOR)

Providing and laying cement concrete 1:2:4( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and curing comlete, including cost of formwork .(As per S.l no.19,sch 4.5 of SOR)

R.c.c. slab work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:2:4 in R.c.c. excluding supply of reinforcement.(As per S.l no.14,sch 288 of DSR)

Mild steel or iron such as in all r.c.c. work including benefit for proper completion of work and including supply of all metarials and labour etc. complete in all.(As per S.l no.3,sch 504 of DSR)

12mm thick cement Plaster with cement mortar in proportion of 1:4 cement and fine sand in single coat on fair side of single or half brick wall for interior plastering including arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in grit and finished even and smooth.(As per S.l no.2,sch 13.4 of DSR)

Providing and laying 2.50 cm thick with cement concrete consisting of one part cement 1.5 part of course sand and three part of approved 10 mm graded stone grit and including water proofing martreail as apporved by the engineer -in- charge in the proportion as specified by manufacturer .(As per S.I no - 2 sch 361 of DSR )

Supply and fixing 6mm (1/4") China white glazed tiles in wall, flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete i/c supply of all materials, labour T&P etc. required for proper completion of work.(As per S.l no.10,sch 8.31 of DSR)

Providing and laying of 8 to 10mm ivory or light shade vitrified tiles of 300 x 300mm size in flooring or skirting laid with 1:4 cement mortar(1 cement :4 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete including supply of all materials labour and T&P etc. required for proper completion of work.(As per S.l no.27,sch 11.41 of DSR)

Supply and fixing of granite stone.(As per S.l no.15, 11.23A of DSR)

Providing and fixing latest digision of white china glaze bakelite seat covers with comod white chap 24 S.l no 2

Supply and fixing white glazed earthware pan 580 mm dia (Indian Type). With 10 ltr low lebel white P.V.C Flasing system including flash pipe etc chap . 24 , CPWD Spec no 17.1.1

Single half stall urinal with 5ltr P.V.C automatic flushing cistern.(Chap. 24 S.No.4A spec 17.5.1)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills. diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part 1): 2011 (Board with BIS Certification marks) Sr.no. 12.45 chapt.12

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even & smooth complete.(As per S.l no.31 of DSR)

Finishing walls with premium Acrylic smooth exterior emulsion paint with silicon additives of required shade New work (Two or more coats applied @ 1.25 ltr / 10 sqm over and including priming coat of exterior primer applied.(As per S.l no.35 of DSR)

Supply and fixing white glazed china pedestal Wash basing(550x400mm) with single hole/rubber of holes for pillat tap with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting.(As per S.l no.3C,spec. 17.7.3 of DSR)

Supply and fixing rain water pipe, 500L water tank, waste pipe , materials for drainge plumbing bib cock , stop cock etc. complete in all.(As per market)

Supply and fixing of electrical material as light , cable , switches ,plugs ,exhaust, etc. complete in all (As per market)

Aluminium door fiting I.S.I mark aluminium work of small size and section such as holding downwards , hold fast , tie nods grindiing best qualty with vantkater cut to size inculding wastage black /grey tinted etc ,ruf required from incuding supply to bolts nuts , vastage etc there fiksing required for proper completion of work. (As per S.l no.36 of DSR)