Municipal Corporation Tender

Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work

M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work.

Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I.

12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work.

S/stacking of 22-4 -53 mm size stone ballast

Consalidation of stone ballast excluding of roller charges

construction of un reinforced. with out Dowel jointed at expansion and construction joint only, plain cement concrete pavement,thickness as per design,over a prepared sub base with 43grade cement or any other type as per clause 1501.2.2 coarse and Fineaggregates confirming to IS 383 maximum size of coarseaggregate not exceeding 25 mm,mixed in a concrete mixer og not less then 0.2 cum capacity and appropriate weinght batcher using approved mix desing, laid in approved fixed side form work ( steel channel,laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrele with shovels. rake compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraclion and expansion, construction jointsas per norms, applying debonding strips primer, sealant,dowel bars, near approaaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14 day, curing compound ( where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 including cost of polythene sheet and dowel bar and also including complete shifting of matrials @concrete when thikness of cc is less then 20 cm(without dowel bar) m-30

R.C.C. 1:1.5:3 in cement corse sand and ston grit. As SIN 284(A)

M. s.(Tor steel or plain) in plain work such as R c c or R B work in cluding bending.

S/ fixing sign board all Camplete

Deduction Cost of old Interlocking Tiles

Deduct cost of old bricks S.I.N,1(A)

Deducti cost of old brick bats S.I.N 1(F)