Municipal Corporation Tender

12 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work

Cement Concrete with 2.0 cm. gaug;e Approved stone grit coarse sand & cement in the proportion of 4:2:1 including supply of all material labour tools and plant etc required for proper completion of work

RCC work with cement coarse sand and 2 cm. gauge.approved stone grit in proportion of 1:1.5:3 in lintel of doors and windows excluding supply of reinforcement and its bending but i/c its fixing and binding the same with 24 BWGGI binding wire and i/c neccesary centering and shuttering etc, and supply of all material labour, tools and plants etc. required for proper completion of work i/c cost of binding wire .the rate excludes making of drip course which shall be paid extra

Mild steel or iron such as in plane reinforcement concrete.

Supply and stacking 53mm to 22.4mm size stone aggregate.

consolidtion of kankar by hand rammer i/c opening out stacks sorting kankar into three sizes,repairing patches in existing road surface with kankar making medhi to retain water and ramming and also i/c carriage of metal upto 30 mtr carriage of water 200 mtr supply and maintenance of barriers and all tools and plants required for proper completion of work ,kanker to be supplied to the contractor free at site but upto 10cm loose thick coat but excluding roller charge

Construction of without double bar expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and also including complete shifting of matrials & Concrete etc.(M-20) but when thikness of CC is less then 20 cm. (without dowel Bar)

Supplying & fixing 80 mm thick Precast cement concrete I shape inter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5 mm thickness having plan dimention 200x( 160+120mm) of op cement , smooth high gloss finish, skid resistant,manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than 40MPa and weight 4.5 kg per no. including cost of meterial, with blanket layer of 4.00cm thick fine sand including labour T& P etc required for proper completion of the work as directed by Engineer-in-charge.

Supply/ fixing of black granite stone sign board with cutting of given maters as per direction of engineer in charge in all complete