Motilal Nehru National Institute Of Technology Tender

Supply & laying of 10 sq mm x 4 core aluminium conductor XLPE armored served aseathed cable 1100 volts grade of following size at suitable depth below ground level over cushion of 75 mm thick sand alround and protected with well burnt bricks on & along the cable & back filling after digging the soil & it back filling/ on wall/ floor the cable run cancealed manner, with cutting and plastering, complete in all respect as per direction of engineering incharge. The armouring of cable shall be properly connected with the earth terminal of the pole panel and as required lugs,, gland etc. Make- Gloster,Kalinga Premium, Rallision, RR Kable, Havells,KEI.

Supply & laying of 6 sq mm x 4 core aluminium conductor XLPE armored served aseathed cable 1100 volts grade of following size at suitable depth below ground level over cushion of 75 mm thick sand alround and protected with well burnt bricks on & along the cable & back filling after digging the soil & it back filling/ on wall/ floor the cable run cancealed manner, with cutting and plastering, complete in all respect as per direction of engineering incharge. The armouring of cable shall be properly connected with the earth terminal of the pole panel and as required lugs,, gland etc. Make- Gloster, Kalinga Premium, Rallision, RR Kable, Havells,KEI.

Supply and fixing of following plain or pin type copper pin plated lug to cable laed insulating with tape and making connection. Complete in all respect. 6 sq mm

Supply and fixing of following plain or pin type copper pin plated lug to cable laed insulating with tape and making connection. Complete in all respect. 10 sq mm

Supply & fixing of of brass nickel plated compression gland for PVC insulated & armoured served sheathed,underground cable including rubber ring etc.complete in all respect.The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 6 sq mm 4 core

Supply & fixing of of brass nickel plated compression gland for PVC insulated & armoured served sheathed,underground cable including rubber ring etc.complete in all respect.The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 10 sq mm 4 core

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator Make- L&T, Havells, Legrand, HPL, C&S. 6 way Double Door

Supplying and fixing 6 to 32 amps rating, FP , 415 volts, miniature circuit breaker (10kA), C curve, suitable for inductive load of following poles in the existing MCB DBcomplete with connections,testing and commissioning etc. as required.complete in all respect.Make- L&T, Havells, Legrand, HPL, C&S. CAT-A

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. Complete in all respect.Make- L&T, Havells,Rallision, HPL, R R Kable, Kalinga Premium, KEI. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supply & Erracetion of factory fabricated & wired metal clad du8st and vermir proof floor mounting , M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four )Pole 36 KA with therma magnatic release) Switches complete and insturment chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flushtype digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F., KW etc.) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolyting aluminiuous bars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable covers and shll be suitable for extension on the sides. The MCCB's shall be complete with suitable cable and boxews, compression glands and indicating lamp on incoming ec.The job includes the grounting of the board as per direction of Engineer-incharge. All out goings of 100 Amp and above shall hve an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm Cubicletype switch board shall be of cat A & B only. (Outdoor type) Incoming 100 Amp. MCCB-1 No Outgoing 63 Amp. MCCB-2 Nos. Cat. B. Pannel Cubicle Type

Supply & erection of 600 mm long cross arm of 50 mm x 50 mm x 6 mm mild steel angle iron with necessary clamps, bolts, nuts etc. on poles complete in all respects including painting with aluminium paint.

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc.as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also).

Supply and fixing of two number 8 SWG G.I. wire in 15 dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the post of cement, sand, labour, T&P other material required for proper completion of the work with 2 Nos.8 SWG G.I. wire. complete in all respect.