Moradabad Development Authority Tender

S/F of single arm bracket as per direction of E/I

S/F of junction box with provision and including of bus bar, kit-kat/MCB etc. required as per site complete in all respect.

S/E of Double walled corrugated HDPE pipe size 90/63 mm complete in all respect as per direction of E/I.

S/E of aluminum conductor PVC insulated Armoured 1100 volts grade LT Cable Size 16 square mm x 4 core. Completed As per direction [Item NO 501(i)/PWD SOR-2018]

S/L of aluminum conductor PVC insulated armored served sheathed cable 1100 volts grade devider on top surface etc. comp. ((PWD SOR Item NO 501/ 2018) 70 Sq.mm. x 3 ½ core 501(m)/2018

S/F of palm or pin type copper tin planted cable socket (lug) to the cable leads etc. comp. (PWD SOR 504/2018) 16 Sq.mm (504 d)

70 Sq.mm (504 h)

S/F of 4.0 sqmm copper conductor cable. (P.S.R)

S/F og G.I. pipe 100mm dia 'B' class for climbing up the cable from ground to overe head line (P.S.R.)

S/F of LED Street light fitting having die cast 'Al' body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 Protection complete in all Respect. CAT-AAA, (Item NO 1423/PWD SOR-2018).

S/F of LED Street light fitting having die cast 'Al' body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all Respect. CAT-AAA, (Item NO 1425/PWD SOR-2018).

S/F of 63 amp 415 volt. Metal clad TPN HRC Type Switch Fuse unit Complete with HRC Fuse on angle Iron bracket Complete in all Respect. (Item No-327\PWD SOR-2018). Make Havells

Painting of electric pole with two coats of aluminum paint over red oxide comp. in all respect (PWD SOR Item NO 634/2018)

S/E of double pole structure 410 SP-62 in 1:3:6 cement concrete including 3 Nos. channel of size 100mm x 50mm and one channel of size 75x40mm including nut/bolt and packing piece comp. as per direction of E/I (P.S.R.)

S/F of straight M.S. channel 100x50mm (7.9 kg/m) 1.15 meter long as per design of cross arm(P.S.R.)

S/F straight M.S. channel 75x40 mm (5.75 kg/m) 2.24 meter long as per design of guarding PSR.

S/F of Clamps made of 75x10 mm M.S. flat with packing piece for securing channel of cross arm. This will be painted with aluminum paint in two coats & over one coat of red oxide comp. with bolts & nuts etc of item No. 4 & 5 (P.S.R.)

S/F of 11 KV TPMO switch of 400 Amp comp PSR

S/F of 11 KV D.O. fuse set. comp PSR

S/E of 11 KV Lighting arrester. comp PSR.

S/F of 11 KV pin insulator on cross arm fixed on S.T.pole (P.S.R.)

S/F of 11 kv disc insulator fitting on cross arm cum clamp fixed on S.T. pole including all bolts, nuts etc. (P.S.R.)

S/E of over head line with ACSR conductor on poles service bracket including binding etc. comp in all respect. (Weasel) (PWD SOR Item NO 627/2018)

S/E of over head line with G.I. wire on poles 8 to 4SWG wire on poles service bracket including binding etc. comp in all respect. (PWD SOR Item NO 628/2018)

S/F of transformer of 11/0.433 of 63 KVA (4 star rating) copper wounded, 3 phase oil immerce naturally cooled, step down outdoor type will be standard accessories complete first filling of oil including commissioning testing and making connection etc. all comp. Analysis as per approved by UPPCL 05 Years Warranty) (P.S.R.)

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable enteies Electrical control panel with TPN MCCB's (Four pole 36 KA with thermal maganatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F., KW etc.) in each phase with touch type selector switches for different reading, instrument fuses, current transfomer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B only. Incoming 100 Amp MCCB-1 No. Outgoing 32 Amp MCCB-3 Nos. S.I. No. 811 (b) (ii) Cat. B. Pannel Cubicle Type

S/M suitable earthing of N/body of T/F/DF/ACB/LA of 600x600x6.0 mm G.I. plate vertically for earthing with its top at least 3.0m below ground level comp. with 20mm dia G.I. pipe and funnel for watering and earthing lead of two nos. 8 to 10 SWG. G.I. wire in 15mm dia G.I. pipe etc. alternate layers of charcial/ coke and salt at least 150mm thick alround etc. comp. as per E/I. 702/2018