Moradabad Development Authority Tender

R.C.C. work with cement approved coarse sand & 2cms(3/4") gauge stone grit in proportion of 1:1.5:3 in coloumns and walls excluding supply of reinforcement and its bending but including its fixing & binding the same with 24BWGGI Binding wire & including necessary centering & shuttering etc. & and also including supply of all material labour T&P etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. ( S.I NO. 289 CH-5)/2022

Mild steel (Tor steel or plain) or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured up to foor two level . (PWD S.I No- 504)

M-150 brick work in 1:4 (one cement and four coarse sand of 2.25 F.M. mortar) in foundation and including supply of all material and T &P etc. required for proper completion of work. (S.1. 307A)/2022

12 mm thick plaster with (1:4) One part of cement and Four part of approved Corse sand includig supply of all material and completion of work. S.I No. 584/2022

Providing & Installing of Floor Mounted M 20 chlorinator 5 kg/ Hour the complete system consist of Tonner, Gas piping, Water booster pump set, Electric Panel/Cables, Water Side piping, Solution side piping, Chlorine gas detector, Safety equipment, Material Handling equipment, Mandatory spares, Leak Gas absorption Equipment. completed in all respect for proper functioning of the system as per requirement at site. (Make:- Metito, Pennwalt, M.U.)

For Water Analyzer: Measurement Parameters: pH, COD, BOD & TSS Online Water Analyzer for measurement of pH, COD, BOD & TSS Model: UV300 Make:Horiba Advanced Techno France SAS (Formerly Tethys Instruments SAS, France Specifications: COD, BOD & TSS measurement by UV light absorption method pH measurement by Electrochemical method - Input: 01 No. 4-20mA input module to connect signal cable from 01 No. flowmeter Power Supply: 90-264 VAC 50/60 Hz 40 VA Screen: Colour TFT LCD, Size: 5.7", resolution: 320 X 240 pixels, LED backlight, Resistive touch screen Communication: RS232 MODBUS protocol & USB Enclosure: Stainless steel with epoxy coating, IP65 - Measurement Range: COD: 0 - 500 ppm (Other higher ranges available upon request) "TSS: 0 - 500 ppm BOD: 0 - 200 ppm (Other higher ranges available upon request) completed in all respect for proper functioning of the system as per requirement at site " TSS: 0 - 500 ppm BOD: 0 - 200 ppm (Other higher ranges available upon request) completed in all respect for proper functioning of the system as per requirement at site

flow meter Providing, fixing, testing and commissioning of Prosonic FMU40 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. The envelope curve can be shown on the on-site display for simple diagnosis. Linearization function (up to 32 points) for conversion of the measured value into any unit of length, volume or flow rate a.Process connection: Thread b.Temperature: -40 to +80°C (-40 to +176°F) c.Pressure: +0.7 to +3bar (+10 to +44psi) d.Maximum measuring distance: Liquids 5m (16ft), Solids 2m (16ft) e.Blocking distance: Liquids and Solids 0.25m (0.8ft) completed in all respect for proper functioning of the system as per requirement at your of site