Moradabad Development Authority Tender

Earthwork: Excavation in trenches for foundations,pipes cables etc. in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 50m and drassing of sides and ramming of bottom disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m . (PWD SI No-251)/2022

M-150 Class brick work in 1:4 (one part cement & four part of coarse sand of 2.75 FM) mortar one brick work in Superstructure including supply of all materials, labour, T&P required for proper completion of the work. S.I. 307(A)+309+310 A UPPWD SOR-2022

M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.2.M ) Half Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall one brick thick. (1:4 cement & coarse sand) ( S.I NO. 307A+309+310/22)

Mild steel or iron work of small size and section such as holding down bolts hold fast, tie roads gratiings etc .(when not included in an over all rates )wrought to required form including of supply of steel, bolts , nuts and wastage etc .and fixing (S.I. No. 502)/UPPWD SOR-2022

12 mm thick plaster with 1:4 (one part cement & four parts of coarse sand of 2.75 F.M) over brick work minimum thickness not to be less than 1 cms with neat cement topping ncluding supply of all material, labour, T & P etc. required for proper completion of the work (S.I. No.-584/UPPUD SOR-2022)

Finishing walls with superior quality water proof cemen paint/snowcem of approved make and quality of new work with two coats to give eben shade including preparing surface by the thoroughly cleaning and sand preparing and supply of all mateials, labour and T&P ETC.required for proper completion of the work. SOR N0 660/2022 Page N0 42

painting two coat over priming coat (but including cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel paint of standared make brushing to give an even shade and finished and including cleanig the surface all dirt dust and other foreign matter sand paparing and stripping including coast matter and scoured with wire brushes fine steel/wood scrappers sand papering and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper comletion of the work.SOR New Item 2+1(a)+4(iii) page No 42 SOR 2022

Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 By Mix in Place Method

Bricks edging on both sides of the road of first class (M-150) brick on edge laid with mud mortar including labour and supply of bricks finished to the required templete and in proper alignment and also including dressing and ramming the excavated earth as directed by the E/I. SOR item no.765

Supply & Laying of 80mm thick Interlocking Tile I-Shape interlocking pavar block a with top layar of minimum 8mm thikness having plan dimension 200x(160+120mm) of O.P. cement, Smooth high class finish skid reditant manufactured rubber moulds through vibro-compression machanism. The compreddive strength of concrete pavar block shall not be less than 30 MPa (M-30) and wight 5kg per no confirming to IS: 15658-2006 including cost of material, labour T&P etc. required for proper completion of the work as directed by Engineer-in-charge. including laveling and dressing of surface to required lavel and slope, filling joints with local sand including the cost of all labour T&P etc. (1) Grey color (2) Red color complete but excluding. but excluding UP. VAT: Additional S.I. No. 51/P51 SOR 2022

supply & fixing of RCC garden bench with back rest consists of 2 nos.L- shaps base supports in gray cement color (thikcness:100 mm, back height :1000mm, front height :450mm, base width: 620mm and 5 nos. reinforced concrete planks in approved /Red colour or terrazzo finish of size 1500mm X 100mm X50mm, and 1 No. of reinforced concrete plank of size 1500 X200mm X 50mm, overall Dimensions: seating length of the bench : 1500mm; seating height of the bench : 450 mm; total height of the bench ;1000m. All components should be reinforced suitably long use and to prevent damage during handling, transporation, and erection , All part are joined together with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly. Bench top and back planks are treated with special anticorrosive , water proop coating so as to make surface glossy and water proof. All components shuld be compaction process complete in all respect ,P.S rate

Cost of Bricks M150 1(A) ch.1 SOR 2022