Moradabad Development Authority Tender

Distempering two coat with oil brand and of manufacture and of required shade on undecorated wall surfaces to with an shade over and including a primer coat with cement primer of brand and manupactur such as british and similar ashian paints after throughly brushing the surface free from morter droppings and and other forgein matter and also including preparing the surface even sand papered smooth including cost of all materials. (PWI) SI.No-649-6501 2022 SOR

Painting Two coat over previs only painted old surface on steel and other metal surface with superior synthetic enamel paint of standered make brushing to give an even shade and finished and including cleaning the surface all durt and other foreing metter sand paparing and stripping including cost matter and scoured with wire brushed fine steel/wood scrappers sand paparing and knotting including coat of all and supply of all materials, labour tools and plants etc. required for proper completion of the work for jali, window painal new Item no.3(iii) +4(iii) / SOR 2022 Chepter 15

Supply and fixing of 6 mm thick china glazed tiles of first Quality in Skritiom or dado laid with I:3 cement and approved coarser morter white cement slurry jointion and polishing complete. materials, labour and T&P etc. required for proper comletionof work. S.I. NO 628/2022

Providing and fixing of fly proof galvanised MS wire gauge to windows and clerestory windows using galvanised MS wire gauge to avarage with of aperture 1.4 mm in both directions with wire of dia 0.63 mm with 2nd class Teak wood beading 62 X 19 mm ( S I no.9.51.1/2022)

Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm) DSR 8.2.2.1/2021

P/L vitirified floor tiles (BELL/KAJARIA/SOMANI or other standard make) in different sizes (thickness to be specified by the manufaturer) with water absorptions less then 0.08 % and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement, 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. SOR new item. 4 page 39/2022

Supply and fixing of 32mm thick flush door commercial quality conforming to I.S. 2022 Part I (1983) including fixing of wooden clears and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied S.I.470(i) SOR 2022

Providing and fixing 25 mm thick shutters for cupboards etc. including ISI marked black enamelled M.S. butt hinges with necessary screws. SI.No. 9.19.1.1/SOR 2022

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) DSR No 9.168/2021

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in charg DSR No 9.169/2021

Providing and fixing 30 mm thik wire gauze shutter using galvanised M.S. wire gauze of average width of aperture 1.4 mm wire of dia 0.63 mm for doors windos and clerestory windows including ISI marked bright finished black enamelled MS kiled seasoned amd chemically treated Hol lock wood (S.I no 9.30.2/2022)

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) DSR No 9.172+9.173/2021

fixing pans of glass with ISI mark quality putty, brads and springs including supply of all material , labour etc concreate SI no. new item 2B chapter 19 pg no.47 SOR 2022

Supply and fixing of swich box made up 16SWG (1.5mm) thick M.S. Sheet of 100x100x65 mm size dully painted with red oxide primer & flused in wall including cutting of brick work fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge. (SOR No 159)/2018 (A) 150x150x65

Supply and fixing of swich box made up 16SWG (1.5mm) thick M.S. Sheet of 100x100x65 mm size dully painted with red oxide primer & flused in wall including cutting of brick work fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge. (SOR No 159)/2018 (B) 175x100x65

Supply and fixing of swich box made up 16SWG (1.5mm) thick M.S. Sheet of 100x100x65 mm size dully painted with red oxide primer & flused in wall including cutting of brick work fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge. (SOR No 159)/2018 (C) 200x250x65

Supply and fixing of swich box made up 16SWG (1.5mm) thick M.S. Sheet of 100x100x65 mm size dully painted with red oxide primer & flused in wall including cutting of brick work fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge. (SOR No 159)/2018 (D 100x100x65

S&F of 6 Amp to 32 Amp M.C.B.(10K) SOR No 1002

Supply and fixing 10cm internal dia P.V.C. down pipe everest or charminar make complete with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5cm x 3 mm fixed to wall with and including supply of 10 cm long 6 mm dia nuts and bolts including washers of required size. all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe.As per item No. 730 above but with PVC pipe, 6kg/per sq.cm. pressure 100cm dia.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 13.46.1

Sanitary work-(B) Providing and fixing white vetreous china wash basin including making connection but exculding the cost of fittings, Flat back wash basin of size 630X450 mm SI.no- 17.25.1

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weithing not less then 690 gms. 15mm nominal bore. (DSR 18.51.1/2019)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250 mm / DSR 2021

Providing and fixing white vetreous china pedestal type water closed* ( uropean type) with seal and lid, 10 litre low level white vitreous china "Aching cistern & C l' flush bend with fittings & C.1 brackets, 40mm flush !bend overflow ananpomont with specials of standard make and mosquito iproof coupling of approved municipal design complete including painting of ifittings and brackets, cutting and making good the walls and floors; wherever required. 17.3.1 / SOR 2022

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC slovent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer - in - charge. Concealed work including cutting chases and making good the walls etc. 15 mm Dia (DSR- 18.8.1)/2021

25 mm (DSR- 18.8.3)/2021

Providing and placing on terrace (at all floor leveis) polyethyiene water storage tank ISI, 12701 marked with cover and sulitable locking arrangement and making necessary hles for inlet, outlet and overflow pipes but without fittings and the base support for tank. SI.No. 18.48/SOR 2022