Moradabad Development Authority Tender

(i) P/F false ceilling on aluminium frame with POP or including supply of all materials labour T&P etc. complete.

(ii) Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 13.26/DSR 2018

(iii) Cornies with design with POP. (A.R.)

(iv) Moulding with design with POP. (A.R.)

P/F POLY CRBONATE SHEET DOME 10MM THICK. (P.A.)

Designing, fabricating, testing, installing and fixing in position CurtainWall with Aluminium Composite Panel Cladding, with open grooves forlinear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings forpressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.v(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched betweentwo Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour andCode Description Unit RateNo.SUB HEAD : 8.0 CLADDING WORK 129shade on face # 1 and polymer (Service) coating on face # 2 as specifiedusing stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot DipGalvanised with serrations and serrated washers to arrest the wind loadmovement, fasteners, SS 316 Pins and anchor bolts of approved makein SS 316, Nylon separators to prevent bi-metallic contacts all completerequired to perform as per specification and drawing The item includescost of all material & labour component, the cost of all mock ups atsite, cost of all samples of the individual components for testing in anapproved laboratory, field tests on the assembled working curtain wallwith aluminium composite panel cladding, cleaning and protection ofthe curtain wall with aluminium composite panel cladding till the handingover of the building for occupation. Base frame work for ACP cladding ispayable under the relevant aluminium item.s The Contractor shall providecurtain wall with aluminium composite panel cladding, having all theperformance characteristics all complete , as per the Architecturalrawings, as per item description, as specified, as per the approvedshop drawings and as directed by the Engineer-in-Charge. However, forthe purpose of payment, only the actual area on the external face of thecurtain wall with Aluminum Composite Panel Cladding (including widthof groove) shall be measured in sqm. up to two decimal places. DSR 8.32/2018

Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coates.CH.-15 New Item-12/2019

Supply and fixing of 32mm thick flush doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden clears and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied. S.I. 470(i)/2019

Providing and laying rectified Glazed Ceramic floor tiles 300 X 300 mm (thickness to be specified by the manufacture) of Ist quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete. DSR- 11.39/2018

Supply and fixing 6mm china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry joining and polishing complete including supply of all materials, labour T& P etc. required for proper completion of the work. S.I. 628/2019

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured To the backing by means of cramps, which shall be paid for separately). Area of slab over 0.5 sqm. DSR- 8.1.1.2

Painting first coat over priming coat (but excluding cost of priming coat) on wood and other metal surface with superior synthetic enamel paint of standered make brushing to give an even shade and finished and including cleaning the surface all durt and other foreing metter sand paparing and stripping including cost matter and scoured with wire brushed fine steel/wood scrappers sand paparing and knotting including coat of all and supply of all materials, labour tools and plants etc. required for proper completion of the work. Same as in item above but on previously painted old surface with paint of : Superior quality PWD SOR New Item 3 (iii)/2019

Painting first coat over priming coat (but excluding cost of priming coat) on steel and other metal surface with superior synthetic enamel paint of standered make brushing to give an even shade and finished and including cleaning the surface all durt and other foreing metter sand paparing and stripping including cost matter and scoured with wire brushed fine steel/wood scrappers sand paparing and knotting including coat of all and supply of all materials, labour tools and plants etc. required for proper completion of the work. Same as in item above but on previously painted old surface with paint of : Superior quality. PWD SOR New Item 3 (iii)/2019

Finishing walls with Deluxe Multi surface system for interiors and exteriors using primer as per manufactures specifications, Two or more coats applied @ 1.25 ltr / 10 sqm over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. DSR- 13.48.1/2018

Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR 13.46.1/2018

White washing Two coat including supply of all materials labour, T.& P.etc. required for proper completion of the work. PWD SOR 672 /2019

Finishing wall with Two coat of water proof cement paint snowcem of approved quailty on previously old treatd surface with this paint to give and even shade including supply of all materials, labour and T&P etc. required for proper completion of the work. PWD SOR 662+662/2019

Mirror polishing on marble work / Granite work / stone work where ever required to give high gloss finish complete. DSR- 8.6/2018

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete PWD SOR 9.96 CH-9 /2019 (A) (i) Sliding bolt 300x16mm,

(ii) Sliding bolt 250x16mm

(B) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete PWD SOR 9.97 CH-9 /2019 (i) 250x10mm

(ii) 200x10mm

(iii) 150x10mm

(C) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete. PWD SOR 9.100 CH-9 /2019 (i) 125mm

(ii) 100mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Fox fixed portion Anodised aluminium (anodised transparent or dyed to reuired shade according to IS : 1865, Minimum anodic coating of grade Ac 15) DSR- 21.1.1.1/2018

Class-150 brick work in 1:4 (1 cement : 4 coarse sand ) inin s/s for 230 mm thick wall including supply of all material, labour, T&P etc. required for proper completion of work. IN super structure (S.I. 307(a) +310) 4650+250 PWD SOR

P/L in Cement Concrete 4:2:1 of not less than strength of M-150 stone ballast (20mm normal size) :2 approved coarse sand:1 cement ) and curing complete including cost of form work supply of all material lab T&P etc all complete.(SI.No-279A)

RCC work with cement approved coarse sand and 2cm (3/4")gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates) in RCC coloumn including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete. PWD SOR 289

Fixing Panes 3.8 to 4.7mm thick of glass with equal of equivalent ISI marked quality brands and springs and including of all materials and labour etc. complete PWS SOR New Item 2(B) CH-19

Providing and applying integral crystalline slurry of hydrophilic innature for waterproofing treatment to the RCC structures like retainingwalls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applyingthe same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm sqm 484.45 DSR 22.23.1/2018

For horizontal surface one coat @1.10 kg per sqm. sqm 373.40. DSR 22.23.2/2018

Supply & Installtion at site of 150 Ltr . Cooling capacity & 150 Ltr. Storage capacity & 50 Ltr. Per hour inbuilt RO with acoucut system. Water body should be made of 304 grade & 24 gauge stainless steel, 11/4HP commressor of Emerson (kriloskar Reciopocating), 02 Nos. taps of approved quallity R. O. mamberin should be of flimtech/CMS make and pump should be kemflow make & including cost of required Voltage stablizer of recuired capacity including supply of all material, labour, T&P, GST 18% instaulation & cartage/transportation etc. required for proper complication of the work. (P.A.R. on quation)

Providding & Fixing in position Collapsible steel shutter with vertical channels 20x10 with top and bootom rails of T iran 40x40x6mm with 38mm dia steel pulles with bolts nuts locking arrangment stoppers handles complate including appling a priming coat. S.I. No. 518 SOR 2019

Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm) DSR 21.3.3/2018

Mild steel of iren work in Heavy sizes such as trusses; builts up gates, door, frames, record recks roof work, gates etc. wrought to required form including drilling holes riveting or weliding whare necessary, and also inculiding supply of steel, bolts, S.I. No 503 SOR-2019

Supply & Fixing 80mm thick Precast cement concrete I-Shape interlocking paver block a with top layer of minimum 8mm thickness having plan dimension 200×(160+120mm) of O.P. cement, Smooth high gloss finish, skid reditant, manufactured from rubber moulds through vibro-compression machanis. The compressve stressive strength of concrere paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS; 15658-2006 with a 4 cm thick layer of fine sand including cost of material, labour, T&P TAXES etc requried for proper completion of the work as directed by Enginner-in charge. 5 New Item no-5. (Page No. 50/ S.O.R. 2019) (1) Grey color (2) Red color (hingh Quality Pigment/lanxess, Bayer Chamicals)

P/F Steel Banch 4 Seater (As per quation)

ACP Sheet Joint Filling with silicon sealant , (As per quation)

P/F in Glazing neoprpne/ EPDM rubber Gas Kit

Dismantling cement concrete or granolithic floors including base concrete and including stacking of dismantled material as directed by the Engineer-in-charge with un a distance of 60 meter (200feet). Item No. 697 DSR-2019

(A) P/F Metal Neon Light Sign Boards

(B) P/F Matel sign name plate

PART ''B'' - SANITARY WORK Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or strap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle level) conforming to IS: 7231. with all fitting and fi. White vitreous china orissa pattern W.C. pan of size 580x440mm with integral type foot rests. PWD SOR 17.1.1 CH-22 /2019

Providing and fixing white vetreous china pedestal type water coset (European type) with seal and lid 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting & C.I. brackets, 40mm flush bend, overflow arrangement with spcloset squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or strap, 10 litre low level white P.V.C. flushing cisttemwith manually controlled device (handle level) conforming to IS: 7231. with all fitting and fi. PWD SOR 17.3 CH-22 /2019

Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standrad flush pipe and C.P. brass speaders with brass unions and One urinal basin with 5 litres white P.V.C. automatic flushing cistern. PWD SOR 17.4 CH-22 /2019

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC slovent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer - in - charge. Concealed work including cutting chases and making good the walls etc. (DSR- 18.8.1)/2018 (i) 15 mm

(ii) 20 mm

(iii) 25 mm

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weithing not less than 810gms. 15mm nominal bore. PWD SOR 18.50.1 CH-22 /2019

Supply and fixing 10cm internal dia P.V.C. down pipe everest or charminar make complete with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5cm x 3 mm fixed to wall with and including supply of 10 cm long 6 mm dia nuts and bolts including washers of required size. all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe. As per item No. 730 above but with PVC pipe, 6kg/per sq.cm. pressure 100cm dia.

Providing and fixing G.I. pipes complete with G.I. fitting and clamps including cutting and making good the walls etc. linternal work exposed on wall. PWD SOR 18.10/CH-22 /2019 (i) 15mm dia nominal bore (S.I. No. 18.10.1/2019)

(ii) 20mm dia nominal bore (S.I. No. 18.10.2/2019)

(iii) 25mm dia nominal bore (S.I. No. 18.10.3/2019)