Moradabad Development Authority Tender

Cement Concrete with 2 cm guage approved stone ballast coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of work. S.I.No-279A/SOR-2022

Earth work in cutting or in embankment & disposel of 1 km. distance excavation to be in the form of regular pits not exceeding 1/2 meter depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to be required levels and 30M lead. the earth from cutting to be used in making embankment or ito be deposited as spoil banks with in 30M distance as directed by the Engg-in-Charge. S.I.No-253(a)

Cement Concrete with 4 cm guage approved stone ballast coarse sand and cement in proportion of 8:4:1 including supply of all materials, labour and T&P etc. required for proper completion of work. S.I.No-281/SOR-2022

M-150 brick work in 1:4 (one cement and four coarse sand of 2.20 F.M. mortar) in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work. S.I.No-307(a)/SOR-2022

Providing and laying in position ready mixed or site batched design mixcement concrete for reinforced cement concrete work; using coarseaggregate and fine aggregate derived from natural sources and usingrecycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, toimprove durability and workability without impairing strength; includingpumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.. Concrete of M25 grade with minimum cement content of 330 kg /cum 5.33.A.2.1 D.S.R 2021

Mild steel or TMT Bars (Fe-500 d grade or higher) or HYSD Bars or iron in plain work such as reinforced concrete or reinfoced brick work (when not includied in an over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply o all steel S.I.No.504/SOR/2022