Ministry Of Road Transport And Highways Tender

Providing slurry seal for filling of hair cracks, surface cracks and preventive/renewal treatment as per MoRTH Specification Clause 512. a) Filling of surface cracks 3 -6 mm and preventing/ renewal treatment.

Repair to all types of damaged stone/brick masonry work in superstructure and substructure of bridges/CD works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure in cement work complete in all respects including testing etc. as directed by the Engineer conforming to MoRTH Specifications Clause no. 1300 and 2200. The rate quoted should be after due consideration of the salvage value of the dismantled material. a) Repair to brick masonry in 1:3 cement sand mortar.

Bill No. 2 : Road Property Maintenance

Painting two coats on old surface after minor repairs to give an even and smooth surface and printing letters and figures with 1st quality synthetic enamel paint of approved brand and manufacture complete in all respects conforming to respective IRC Specifications as per S.O.R.,CH. No. 15, New Item No 13.46.1 Km Stone

Painting letters upto 15 cm, size complete including supply of all materials labour and T&P etc. required for proper complition of work. S.I No. 819 As per S.O.R CH.No. 21 Sl No. 819

White wash/cement paint/snowcem in two or more coats to give an even shade and smooth surface for protection of exposed concrete/masonary portion of Bridges/CD works, kerb and wheel guard including scrapping of damage paint from old surface and repairing of the existing surface wherever necessary complete as directed by the Engineer-in-Charge. a) White washing two coats on existing surface as per S.O.R CH.No.16 Sl No. 672

Replacement of stolen/missing retro-reflectorised traffic sign boards by providing and fixing new retroreflectorised cautionary, mandatory and informatory sign as per ASTM D 4956-04 made of High intensity grade Microprismatic sheeting Type-IV, fixed over aluminium sheeting 2.0 mm thick supported on a MS Angle Iron Frame comprising of 40 mm X 40 mm X 4 mm. This frame is further welded to MS Angle 75 mm X 75 mm X 6 mm size, 3.5 meter high vertical post complete as per drawing. This vertical post shall be embeded in M-15 grade cement concrete in a pit of size 450 mm X 450 mm X 600 mm, 600 mm below ground level complete in all respects as per direction of the Engineer.

a) Informatory Sign i) Advance Direction, Destination, Reassurance and place identification sign (size 2100 mm X 1700 mm) as per drawing with two vertical posts embeded in M-15 cement concrete details as per description given above and as per drawing.

b) Cautionary/Warning sign i) Triangular 900 mm side

c) Mandatory/Regulatory sign i) Octagon “STOP” sign

c) Mandatory/Regulatory sign ii) 600 mm dia Circular sign

c) Mandatory/Regulatory sign iii) Hazard Marker Sign( (30cm x 90 cm)

c) Mandatory/Regulatory sign iv) 60 cm x 50 cm rectangular Single Chevron

Providing and marking of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms/sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes complete in all respects. The job includes marking of centre line, shoulder line, edge line, zebra crossing marking, arrows and dashes marking at the junctions as per Technical Specifications Clause 803.4 complete in all resp Edge line / Centre Line (LS)

Providing and laying of hot applied thermoplastic compound 5.00 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. as per S.O.R. (Lucknow) ,Ch.No. 26 Sl.No. 3 For Repeated Bars

Cats Eye/Pavement Marker (NMC nail Less):- Made out of Acrylic-strene-Acrylonitril or Hi-Impect polysterene fitted with Moulded of Methacrylate (NMC) reflector cube corner reflector design; Filled with tightly adhering potting compound as per ASTM D788 size 11.5 cm X 7cm X 1.6 cm or 10 cm X 10 cm X 1.75 cm provided with bituminous adhesive in sufficient quantity with each unit for fixing. No nail should be allowed for fixing.

Supplying and installation of delineators (Roadway indicators) 95 cm high above ground level of total length 135 cm painted black and white in 15 cm wide strips fitted with 3 nos. rectangular microprismatic reflective sheeting fixed on 2 mm thick aluminum sheet of size 80 mm X 100 mm one in each black strip duly riveted in the rectangular tubular section facing direction of traffic. Rectangular Tubular section of size 100 mm X 50 mm X 3 mm (thickness). The Tubular section of the delineator is encased all around with steel welded wire mesh of thickness 2.5 mm, in size 120 mm X 70 mm X 760 mm as shown in the drawing. The welded wire mesh is painted with two coats synthetic enamel white paint after applying two coat red oxide primer. The delineator is embedded in M-15 cement concrete in pit size 300 mm X 300 mm X 450 mm. The rate quoted is for the complete job as per Drawing and direction of Engineer.

Bill No. 3 : Pavement Repairs

Providing treatment and repair to pot holes/ruts of any depth/patch repair of all types of bitumen pavement complete as per Technical Specification Clause 3004.2, and as per direction of Engineer by using paving grade bitumen/emulsion/cold ready mix material. The job includes removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause no. 503, back filling the patch with bituminous material as per Clause no. 509. Compacting trimming and finishing the surface to form a smooth continuous surface all as per Clause no. 3004.2 of Technical Specifications.