Ministry Of Road Transport And Highways Tender

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. But excluding GST.

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Tack Coat on Granular surfaces treated with primer )

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Tack Coat on Bituminous surfaces )

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Road Work (For Junction Improvement)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. But excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Tack Coat on Granular surfaces treated with primer )

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete grade-II with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with plastic waste (LDPE,MDPE,PET or PUR)@ 8% by weight of bitumen and bituminous binder VG-40 @ 5.4 per cent (including percent of plastic waste) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.

Road Signage and Road Marking

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes Rtes are inclisive of all taxes ,royalty etc. all T&P Machine material and labour required for proper completion of work As per SOR SI.No- 19.01 (I)Edge Line(II)Zebra crossing at both sides of T-junction,Before / after Abadi portion ,School(II)Stop line With Zebra Crossing

Providing and laying of repeatitive bars of hot applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 15 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per MORTH specification.) Before / after Abadi portion(II)Before / after T-junctions(III)School

Retro-Reflectorised Traffic Signs Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro-reflectorised Sheetingfixed over 2mm thick aluminium sheeting vide Clouse 801.3 ,4mm /3mm thik aluminium Compousit Material Sheet depending on the size of the sign fixed the over back suport frame of min 25x25x3 mm thick angle mouted on a milde Steel circular pipe 65NB ,3.2mm thickness firmly fixed to the ground by means properly desinged foundation whith M25 grade cement concrete 45cmx45cmx60cm ,below ground level as per approved drowing the sign shall bi maintain 12 of IRC67 (Triangal 900mmx900mmx900) (I)Give Way (II) School Ahead (III) T-Intersectuon(IV)Left/Right Hand Turn (V)Pedestrain Crossing

Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro-reflectorised Sheetingfixed over 2mm thick aluminium sheeting vide Clouse 801.3 ,4mm /3mm thik aluminium Compousit Material Sheet depending on the size of the sign fixed the over back suport frame of min 25x25x3 mm thick angle mouted on a milde Steel circular pipe 65NB ,3.2mm thickness firmly fixed to the ground by means properly desinged foundation whith M25 grade cement concrete 45cmx45cmx60cm ,below ground level as per approved drowing the sign shall bi maintain 12 of IRC67 (60CM Circular) Minimum Speed Limit

Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro-reflectorised Sheetingfixed over 2mm thick aluminium sheeting vide Clouse 801.3 ,4mm /3mm thik aluminium Compousit Material Sheet depending on the size of the sign fixed the over back suport frame of min 25x25x3 mm thick angle mouted on a milde Steel circular pipe 65NB ,3.2mm thickness firmly fixed to the ground by means properly desinged foundation whith M25 grade cement concrete 45cmx45cmx60cm ,below ground level as per approved drowing the sign shall bi maintain 12 of IRC67 (80mmX60mm Rectangular ) (I) Aabadi name (II) Go Slow

Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro-reflectorised Sheetingfixed over 2mm thick aluminium sheeting vide Clouse 801.3 ,4mm /3mm thik aluminium Compousit Material Sheet depending on the size of the sign fixed the over back suport frame of min 25x25x3 mm thick angle mouted on a milde Steel circular pipe 65NB ,3.2mm thickness firmly fixed to the ground by means properly desinged foundation whith M25 grade cement concrete 45cmx45cmx60cm ,below ground level as per approved drowing the sign shall bi maintain 12 of IRC67 60cmX50cm Rectangular ( Chevron )

Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro-reflectorised Sheetingfixed over 2mm thick aluminium sheeting vide Clouse 801.3 ,4mm /3mm thik aluminium Compousit Material Sheet depending on the size of the sign fixed the over back suport frame of min 25x25x3 mm thick angle mouted on a milde Steel circular pipe 65NB ,3.2mm thickness firmly fixed to the ground by means properly desinged foundation whith M25 grade cement concrete 45cmx45cmx60cm ,below ground level as per approved drowing the sign shall bi maintain 12 of IRC67 90CM (High Octagon) Stop

Supply & fixing of Moulded shank Cats Eye (Raised Pavement Markers) made of polycarbonate molded body and reflected panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and conforming to ASTMD 4280 Type H and complying to specification of category 'A' of MORT&H circular No. RW/NH/33023/10-97-DO III dt.11.06.1997. The height, width and length shall not exceed 20mm, 130mm and 105mm & with minimum reflective area of 13sq.cm. and the both side slope to the base shall be 35+/-5 degree. Rates including cost of material, labour T&P etc. but excluding GST. (Chapter No.19 Ite No.: New Item 1)

Supply & fixing of delineators made up of 120cm. Long made of 16 gauge M.S. pipe of 75 O.D. dia M.S. pipe painted with black colour stove enameled paint and four Nos. each 75mm. width high intensity Prismatic (HIP) Grade strips bounded on it Retro-Reflective Strips Red/Yellow/White colour covered with welded mesh (Jali) complete including fixing in concrete 1:2:4 of 23cm x 23cm x 45 cm with all material labour, T & P etc. But excluding GST.

Tree Plate Supply & Fixing of Retro Refflective Tree Plate having size 15cm x15cm, consisting Type XI Retro Reflective Sheeting Fixed Over 1.5mm thick aluminium sheet including labour ,Material T&P etc. for proper comletion of the work .The rate shall include all materials, labour T&P, transportation ,installation and incidentals all complets as per direction of the Engineer-in Charge

Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro-reflectorised Sheetingfixed over 2mm thick aluminium sheeting vide Clouse 801.3 ,4mm /3mm thik aluminium Compousit Material Sheet depending on the size of the sign fixed the over back suport frame of min 25x25x3 mm thick angle mouted on a milde Steel circular pipe 65NB ,3.2mm thickness firmly fixed to the ground by means properly desinged foundation whith M25 grade cement concrete 45cmx45cmx60cm ,below ground level as per approved drowing the sign shall bi maintain 12 of IRC67 (450mmX900mm Rectangular ) (I) Two Way Hazard Signs

Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro-reflectorised Sheetingfixed over 2mm thick aluminium sheeting vide Clouse 801.3 ,4mm /3mm thik aluminium Compousit Material Sheet depending on the size of the sign fixed the over back suport frame of min 25x25x3 mm thick angle mouted on a milde Steel circular pipe 65NB ,3.2mm thickness firmly fixed to the ground by means properly desinged foundation whith M25 grade cement concrete 45cmx45cmx60cm ,below ground level as per approved drowing the sign shall bi maintain 12 of IRC67 (300mmX900mm Rectangular ) (I) Object Hazard Signs

Direction and place Identification signs with size more than 0.90 sqm size Board Providing and erecting direction and place identification retro- reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends , letters , numerals and borders etc should be as per MoRTH specification No-801.3.7 . Sheet fixed over aluminium sheeting ,2 mm thick with area exceeding 0.9 sqm.Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm.,below ground level as per approved drawing, complete.

Providing and erecting a "Thrie" metal beam crash barrier comprising of 3m thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5m spaced 2mcentre ot centre. 2mhgih with 1.15 mbelow ground level, al steel parts and fitments to be galvanised by hot dip process, al fitings ot conform ot IS: 1367 and IS: 1364, meatl beam rail ot be Rmt fixed on the vertical post with a space of channel section 150 x 57 x 5 m. 546 m long complete as per clause 810