Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/replacement Of Sanitary Fitting, Plumbing, Sunken, Flooring, Tilling, Water Proofing, Steelgate, Path, Wall Etc At Vrg Line, Me Line, Cod Estate, Supply Depot, Etc Under Age B/r-i Of Ge (i) Kanpur in Kanpur Nagar, Uttar Pradesh, with an estimated contract value of Rs. 48,00,000. The bid opening date for this tender is 02-06-2025 and the last date for bid submission is 23-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date2 Jun 2025
Closing Soon23 Jun 2025
Tender Amount₹ 48,00,000
Costs
EMD
₹ 96,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_711957_1Tender No
GE(I)/KAN/T-35 OF 2025-26Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply only liquid water proofing compound complete all as specified and directed.
144.74259999999998
4
-
... More
M&L water proofing treatment to roof slab with APP modified polymeric membrane thickness not less than 3 mm plain membrane (weight of membrane not less than 3.50 Kg + 5% per Sqm) and weight of centre core polyster mat shall be 160 gram + 15% per Sqm and lower side finished with 10 to 15 micron thermo fusible polyethylene complete all as specified and directed with following courses of descriptions:-
(a)The surface of roof, parapet and gutters and drains mouth etc over which waterproofing treatment is to be applied shall be thoroughly cleaned of all foreign matter, moss dust etc by wire-brushing and dusting. For cast iron/PVC drains outlets a grove shall be cut around to tuck in the treatment. Concrete angles-fillets provided at junctions between roofs and verticals faces of walls (parapet and other walls) around obstacles such as pipe, chimney stacks etc and other similar situation to ease up about corners.
(b) On the prepared surface one coat of Solvent based bituminous primer (Sika® WP shield Primer or other techno commercially Equivalent make of STP/IWL) shall be applied @ 0.35 to 0.50 Kg/sqm till the surface is properly impregnated. The time delay of laying of membrane after application of primer shall be as per manufacturer instructions.
(c) Laying of polymeric waterproofing membrane and bonded completely to the substrate & the overlaps are then sealed /fused by flame torch as per manufacturer instructions.
(d) The overlaps shall be of minimum 4 Inch (100 mm) side lap and 150mm at end ,sealed by the flame-torch.
1069
-
-
... More
M&L for preparation of new surfaces and applying two coats of aluminium paint over and including a coat of aluminium primer on membrane, over 10cm in width or girth complete all as specified and directed.
469
7
-
... More
M&L for cement concrete tiles 25cm x 25cm x 25mm thick, laid over and including 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of tiles complete all as specified and directed.
500
8
-
... More
M&L for brick tiles 40mm thick with min flexural strength 1.5 N/Sqmm set, joints grouted flush in CM 1:3 mixed with water proofing compound by weight of cement as per manufactur instruction over and including 15 mm thick screed bed in CM 1:4 , ponding test shall be done after laying of tiles complete all as specified and directed. (WPC shall be measured and paid separately)
100
-
-
... More
Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed.
26
2
-
... More
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.
22
3
-
... More
All as per item No. 10.00 above but except bricks complete all as specified and directed.
4
4
-
... More
Demolition of plain cement concrete / tiles in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed
19.75
5
-
... More
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
(Note : Debris obtained from dismantling will be dispossed off as directed)
214
7
-
... More
M&L 25mm thick PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in floor to receive tiles complete all as specified and directed.
340
8
-
... More
M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including15mm thick screed bed in CM 1:6 complete all as specified and directed.
90
-
-
... More
All as per Item No 15.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.
9
-
-
... More
M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
250
2
-
... More
All as per Item No 17.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.
25
3
-
... More
M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.
180
-
-
... More
Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar complete all as specified and directed.
(Note : Debris obtained from demolition will be dispossed off as directed)
10.8
2
-
... More
Material and labour for 16 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over and including 15mm thick screed bed in cement mortar (1:4) pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed.
20
3
-
... More
M&L 18-20mm thick machine cut kota stone(full size not less than single piece) slab in flooring, staircase steps, landing etc laid over and including 15 mm thick screed bed of cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing complete all as specified and directed.
80
4
-
... More
M&L 18-20mm thick machine cut kota stone (full size not less than single piece) slab in riser of steps,skirting ,dado and pillar laid over and including 10mm thick rendering of cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing complete all as specified and directed.
8
5
-
... More
M&L 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
150
7
-
... More
M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
150
8
-
... More
Taking down chowkats with shutter (without taking off shutter) from chowkats area n.exc 1.5 Sqm each complete all as specified and directed.
65
-
-
... More
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.
15
2
-
... More
Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each complete all as specified and directed.
4
3
-
... More
Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each and re-fixing in the same opening complete all as specified and directed.
2
4
-
... More
M&L 2nd class HW as in plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed.
0.6
4
-
... More
S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including providing stainless steel wire cloth, 4mm thick plain glass panes, necessary hold fast & MS grills for safety purpose be provided complete all as specified and directed.
Note: 1. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
2. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm plain sheet glass panes, necessary hold fast shall be deemed to be included in this item. 3. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items.
14.399999999999999
5
-
... More
M&L for factory made uPVC white colour ventilator. Horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with MS pipe stiffener (19x19x0.8mm thk) vertical frame member with help of required size CSK screw and adhesive. Total unit is fixed with help of bracket/fasteners including 4 mm thick frosted glass, MS grills and SS Jalli as per requirement.
1. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm frosted/pin headed sheet glass panes & necessary hold fast shall be deemed to be included in this item. 2. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items
6
7
-
... More
S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and directed.
Note : M&L for 4mm plain sheet glass panes shall be deemed to be included in this item.
21.599999999999998
8
-
... More
S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and directed.
Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item.
21.599999999999998
-
-
... More
S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specified and directed.
Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm & 4mm thick frosted/pin headed glass panes as per requiremet shall be deemed to be included in this item.
4.5
2
-
... More
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube incl suitable metal stifner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed.
95
3
-
... More
S&F factory made solid panel PVC moulded door shutter 28 to 30 mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face with particle board core complete all as specified and directed.
32
4
-
... More
S&F PVC but hinges 100mm size complete all as specified and directed.
60
5
-
... More
S&F PVC handle 150mm size complete all as specified and directed.
40
7
-
... More
S&F PVC tower bolt 150mm size complete all as specified and directed.
40
8
-
... More
M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.
40
-
-
... More
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
3.5
2
-
... More
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.
1000
3
-
... More
S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including, steel gates and similar work, cut size, holes punched; including round headed screws, and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded , including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
30
4
-
... More
S&F hold fast of flat iron 25 x 3 mm complete all as specified and directed.
10
5
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
0.4
7
-
... More
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
432
8
-
... More
S&F Joist, channel, angle, or tee sections fixed independentaly, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conf to Fe-410-w or E -250 quality A complete all as specified and directed.
100
9
-
... More
Demolition of reinforced (reinforcement cut as required to facilitate demolition cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed.
2.5
10
-
... More
M&L for reinforced cement concrete (1:1.5:3 ) type A1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
0.5
11
-
... More
M&L for RCC (1:1.5:3) type A1 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
2
12
-
... More
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.
15
13
-
... More
M&L for formwork to edges of concrete flats, roofs, floors etc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for fair finished surfaces complete all as specified and directed.
12
15
-
... More
S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified complete all as specified and directed.
225
16
-
... More
All as per item No. 54.00 above but 6 to 8mm dia in stirrups, spacers and binders complete all as specified and directed.
50
17
-
... More
Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
775
-
-
... More
M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.
75
2
-
... More
M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished fair and even (upto two storey of building) complete all as specified and directed.
Note:- Rate quoted by the contractor shall be deemed to including scaffolding upto H+2 height and safety measures.
200
3
-
... More
M&L for 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces of walls, finished fair and even (upto two storey of building) complete all as specified and directed.
Note:- Rate quoted by the contractor shall be deemed to including scaffolding upto H+2 height and safety measures.
250
4
-
... More
M&L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall finished fair and even complete all as specified and directed.
250
5
-
... More
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white washsurfaces complete all as specified and directed.
75
7
-
... More
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed
50
8
-
... More
M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over and including and including a coat of primer complete all as specified and directed.
200
-
-
... More
M&L for preparation of old plastered surfaces of wall and applying one coat of white wash including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified and directed.
200
2
-
... More
All as per Item No 64.00 above but as on ceiling complete all as specified and directed.
350
3
-
... More
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces using wall care putty where required for filling purpose of any depression /cavity etc and applying two coats of oil bound distemper of any colour over and including a coat of primer complete all as specified and directed.
1000
4
-
... More
M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint of approved shade complete all as specified and directed.
450
5
-
... More
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.
400
-
-
... More
M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed.
200
2
-
... More
M&L for preparation of old steel surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed.
150
3
-
... More
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide & over 10cm width or girth complete all as specified.
163.05
-
-
... More
M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed.
20
2
-
... More
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
51
2
-
... More
Fixing only of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.
11
15
-
... More
S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.
40
-
-
... More
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
81
2
-
... More
Fixing only of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.
5
2
-
... More
S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified and directed.
76
-
-
... More
S&F in repair vitreous china WHB white flate back size 550x400mm including angle iron brackets, and CP waste coupling 32mm dia complete all as specified and directed.
10
2
-
... More
S&F 450 mm x 600 mm bevelled edge mirror, mounted on 6 mm thick AC building board or commercial plywood including aluminium framing and fitted to wooden plugs with CP brass screws and cup screws including taking down old unserviceable mirror complete all as specified and directed.
10
3
-
... More
S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern and making connection with & including CI P/S Trap, etc complete all as specified and directed.
10
4
-
... More
S&F in repair of PVC low level flushing cistern white 10 Ltrs capacity with inlet 15mm bore ball valve, float and handle incl brackets 32mm bore PVC flush pipe of required length complete incl taking out of existing flushing cisterns complete all as specified and directed.
15
5
-
... More
S&F in repair 15mm bore CP fancy type long body bib tap with capstan head complete all as specified including flange complete all as specified and directed.
30
7
-
... More
S&F in repair 15mm bore CP fancy type short body bib tap with capstan head complete all as specified including flange complete all as specified and directed.
20
8
-
... More
S&F in repair stop valve concealed type 15mm bore of cast copper alloy,fancy type of CP with long shank and cup,high pressure screwed both ends for iron pipe or unions complete all as specified and directed.
10
-
-
... More
S&F in repair Angular stop cock 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.
40
2
-
... More
S&F in repairs pillar taps fancy type (ISI marked) cast copper alloy cp with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified and directed.
10
3
-
... More
S&F in repair chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and directed.
10
4
-
... More
S&F in repair chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as specified and directed.
10
5
-
... More
S&F in repair CP grating 100 mm dia round fixed with white cement complete all as specified and directed.
10
7
-
... More
S&F in repairs 32 mm dia PVC waste pipe for WHB & sink 80 cm long with union complete all as specified and directed.
11
8
-
... More
S&F in repairs PVC connection 15 mm dia 450mmm long with 2 Nos PVC check nuts with washer complete all as specified and directed.
40
-
-
... More
Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below :- (a) S&F drainage spout pipe GI 40 mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600 mm long). (b) M&L PCC 1:1.5:3 type B0 (using 12.5mm graded stone agg), 50 mm thick laid in slope towards drainage out spout pipe mixed with waterproofing chemical as per manufacturer instructions. Khurra 150mmx150mm (min) at appropriate location for free flow (of leaked water if any) towards drainage spouts shall be provided integrally while laying PCC.Fixing of spout shall be done with same PCC as in this item. (c) M&L18 mm thick cement platster in CM 1:3 on vertical faces mixed with water proofing chemical.
(d) Item No 93(c) shall be executed while concrete is green as per item No 93(b) above and proper curing and ponding test shall be done before laying drainage/water supply pipes upto the entire satisfaction of Engineer in charge. (e) Applying two coats of TOP seal 107 on vertical as well as horizontal surface. (f) Drainage and water supply pipe if required & test for leakage/sanitary pipes and shall be laid to slope and a clear gap underneath the pipes shall be made available by providing suitable cement concrete blocks.
10
2
-
... More
(g) M&L PCC1:5:10 type E-2 using 10-40mm down graded stone aggregate as reqd depth at site over and including 150mm thick 20mm single sized stone agg to provide a filter media. (h) M&L PCC 25 mm thick 1:2:4 type B-0 using 12.5 mm grade stone aggregate as level course. (j) M&L for 7 to 8 mm thick joint free non skid ceramic coloured printed tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed filled with epoxy chemical mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:6 ).
Note for item No 93:- Waterproofing Treatment shall be undertaken alongwith laying of drainage pipes/Sanitary pipes/ Drainage Spout etc (ii) The work shall be carried out as per the direction of Engineer in Charge. (iii) The sunken treatment work shall only be carried out after written approval of Engineer in charge for Leakage/seepage of water/sanitary pipes. (iv) Cost of drainage spout shall deemed to be included in the item however sanitary pipe, water pipe line if required shall be paid separately under respective item.
(v) Laying of Chemical required for varios applications shall be as per manufacturer instructions. (vi) Plan area shall only be measured and paid. (vii) The contractor shall give a guarantee of 10 years from the date of completion of work for sunken treatment. The amount Rs. 25.00 (Rupees Twenty five Only) per Sqm and min of Rs 2500/- for sunken treatment shall be withheld from contractor’s final bill till the expiry of guarantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE (I) Kanpur.
-
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
25
4
-
... More
M&L for 4mm thick plain sheet glass ordinary quality and fixed with oil putty in square n.exc 0.5 Sqm in each pane of steel windows complete all as specified and directed.
20
5
-
... More
All as per item No. 95.00 above but frosted glass / pin headed glass complete all as specified and directed.
5
7
-
... More
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and as directed.
100
8
-
... More
S&F in repairs fancy type stainless steel curtain rods of 25 mm dia for doors/ windows etc including SS brackets and SS funnels/dome complete all as specified and directed.
100
9
-
... More
S&F stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495mm x420mm, with bowl size 405mmx 355mm x 178mm with including waste coupling, waste pipe complete all as specified and directed.
5
10
-
... More
S&F in repair sinks with drainage board of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling complete all as specified and directed.
5
11
-
... More
Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.
25
12
-
... More
M&L 19mm thick coloured MDF board prelaminated both side as in kitchen cabinet including side lipping etc complete all as specified and directed.
20
13
-
... More
All as per item No 102.00 above but in shelf and partition etc complete all as specified and directed.
5
15
-
... More
M&L 100mm size stainless steel hinges auto close type complete all as specified and directed.
75
16
-
... More
M&L 125mm size stainless steel handles complete all as specified and directed.
35
17
-
... More
Dismantling PVC water tanks of capacity exc 250 ltr but n exc 500 ltr and removing to store complete all as specified and directed.
15
-
-
... More
Dismantling PVC water tanks of capacity exc 500 ltr but n exc 1000 ltr and removing to store complete all as specified and directed.
15
2
-
... More
S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.
15
3
-
... More
S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white color (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.
15
4
-
... More
Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height including fittings/grids etc complete all as specified and directed.
600
5
-
... More
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications complete all as specified and directed.
300
7
-
... More
S&F false ceiling. The grid shoud be of 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600mm module, cut cross tees longer than 600mm require independent support 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200mm cross tees. The 1200mm cross tees to have central "birdsmouth" notches to facilitate fitting of 600mm cross tees. Perimeter trim to be wall angles, secured to walls at 450mm maximum centres. Hangers made of galvanised steel of size 26x26x25x1.2mm with a galvanised thickness of 80 grm/Sqm. A pre straightened hanger wire of dia 2.68mm of 1.83m length , thickness of 80grm/Sqm and a tensile strength of 344 - 413 MPa, alongwith adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68mm with a minimum pull strength of 110 Kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner complete all as specified and directed.
300
8
-
... More
M&L for providing 8mm thick gypsum ceiling tiles of size 595 x 595 mm fixed or laid/ inserted to timber/GI/Aluminium frame work as in ceiling, with / without screws complete all as specified and directed.
300
-
-
... More
M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 1.5 N/Sqmm or as per manufacturer instruction as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet,complete as per manufacturer's instructions complete all as specified and directed.
275
2
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%