Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To Wpc Doors And Windows In Bldg No 1 2 3 And 4 At Ra Bazar (ss) Fafa Accn Under Ge (east) Lucknow in Lucknow, Uttar Pradesh, with an estimated contract value of Rs. 38,81,000. The bid opening date for this tender is 16-11-2026 and the last date for bid submission is 07-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - UP Tender
Opening Date16 Nov 2026
Closing Date7 Dec 2026
Tender Amount₹ 38,81,000
Costs
EMD
₹ 77,620Document Cost
₹ 500Tender Fee
Refer Documents
Description
Spl Repair To Wpc Doors And Windows In Bldg No 1 2 3 And 4 At Ra Bazar (ss) Fafa Accn Under Ge (east) Lucknow
Contact
Tender Id
2026_MES_798965_1Tender No
GE/E/LKO/T-112 OF 2026-27Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All as per item No 3 above but frame size 65X125 mm
201.6
-
-
... More
M & L for providing and fixing factory made single extruded WPC prelam (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with 2 mm thick edge moulding tape or 90 degree edge bend finish complete all as specified and directed. Notes:-
(a) Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- (format of MoU is enclosed with Appx A to NIT. (b) Irrespective of whatever specified elsewhere in tender documents, the work related WPC doors / windows shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU
312.48
-
-
... More
Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC PRELEM DOOR SHUTTER with lamination consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XPM aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws and 2 mm thick edge moulding tape or 90 degree edge bend finish etc. complete all as specified and directed. Notes:-
(a) Irrespective of whatever specified elsewhere in tender documents, the work related WPC doors / windows shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU
100.8
-
-
... More
M & L for providing & fixing factorty made windows pre-painted steel powder coated (hot galvabised treatment) (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, SS stay handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square steel guard bars with 6"(152.4mm) pitch, complete for finished item of work. The windows should include proper cutout for AC/coolers and design & drawaings as approved by Engineer in Charge complete all specified and directed.
Notes:-
(a) Irrespective of whatever specified elsewhere in tender documents, the work related to windows shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU
177.12
-
-
... More
S & F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all specified and directed.
336
-
-
... More
S & F Aluminium handles cast type anodised of 150mm complete all specified and directed.
336
-
-
... More
S & F 100mm size butt hinges, stainless steel, SS-304 garde and fixed complete all specified and directed.
504
-
-
... More
S & F 100mm Heavy Duty Stainless Steel SS-304 garde Self-Door closer Hinges , including Hardware Spring , Automatic self closing with positioning 90 Degress complete all specified and directed.
144
-
-
... More
S & F 100mm size Floor door stopper of aluminium alloy body and tongue, anodised, with rubber ends complete all specified and directed.
168
-
-
... More
S & F of 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all specified and directed.
168
-
-
... More
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.
500
-
-
... More
M&L for Self Curing Ready Mix Plaster of thickness 12 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.
300
-
-
... More
M&L for Self Curing Ready Mix Plaster of thickness 8 mm to 10 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, at any height with necessary scafolding surface finished even and smooth with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge
200
-
-
... More
M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling Complete all as specified and directed by Engr-in-Charge.
300
-
-
... More
M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all specified and directed.
450
-
-
... More
M&L for 1-1.5 mm thick wall care putty to receive smooth finishes complete all as specified and directed.
350
-
-
... More
M & L for applying Two coats of Plastic emulssion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described complete all as specified and directed. Note :- Plastic Emulsion Paint and primer of same manufacturer to be applied through mechanical means only.
450
-
-
... More
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means)
350
-
-
... More
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
10
-
-
... More
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all specified and directed.
10
-
-
... More
Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed.
23
-
-
... More
M & L for brick work with fly ash bricks, old size brick straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.
23
-
-

