Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provn And Installation Of Electric Panel And Allied Items Near 158/a Bldg Under Ge (u) Meerut Cantt. in Meerut, Uttar Pradesh, with an estimated contract value of Rs. 3,42,000. The bid opening date for this tender is 21-10-2026 and the last date for bid submission is 18-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - UP Tender

Opening Date21 Oct 2026
Closing Soon18 Nov 2026
Tender Amount₹ 3,42,000 
Notes
Download

Costs

Description

Provn And Installation Of Electric Panel And Allied Items Near 158/a Bldg Under Ge (u) Meerut Cantt.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
70 Sqmm 3.5 core

250

100

-

... More
25 Sqmm 4core

100

10

-

... More
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying cables / poles foundation / stay assembly and getting out in Soft soil complete all as specified and directed .

56.7

10

-

... More
Removing excavated material not exceding 50 m and deposting where directed at a level not exceding 1.5 m above the starting point.

28.3

10

-

... More
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed

28.4

10

-

... More
M & L for dry sand cushioning trenches for cable cushioning including watering all as specified on both top and bottom of cable including ramming complete all as specified and directed. Note : Punned thickness shall be considered for measurement purpose.

21.7

100

-

... More
M&L for burnt clay fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed.

1.68

10

-

... More
M&L for plate earthing for panel complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI Earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of LT equipments etc at the other, earth strip encased in and including 50mm bore GI grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer for test point and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate and RCC cover complete all specified and shown in electrical plate No 3 of SSR Pt-I. The scope of work also includes necessary excavation and earthwork, complete all as specified and directed.

2

10

-

... More
Supply and fixing GI pipe light grade mm dia for protection of LT cable under road or on wall, complete all as specified and directed.

-

-

-

... More
80 mm bore

12

10

-

... More
M&L for auguring of hole suitable for passing 80mm to 150mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not excd 30M in length complete all as specified and directed. Note: Pipe shall be measured and paid separately under appropriate items and any damage to existing cables of any type shall be made good by the Bidder without any extra cost to department.

6

10

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.