Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Building Construction
Eprocure
Opening Date30 Dec 2024
Closing Date3 Feb 2025
Tender Amount₹ 46,72,33,000
Costs
EMD
₹ 15,00,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_691024_1Tender No
958130/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part II.
1
81238
-
... More
SCHEDULE A PART III (INTERNAL ELECTRIFICATIONS)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part III.
1
1271065
-
... More
SCHEDULE A PART IV (EXTERNAL ELECTRIFICATIONS)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part IV .
1
5966414
-
... More
SCHEDULE A PART V (SEWAGE DISPOSAL)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part V
1
178147
-
... More
SCHEDULE A PART VI (AREA DRAINAGE)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part VI
1
8053502
-
... More
SCHEDULE A PART- VII (RAIN WATER HARVESTING)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part VII
1
632943
-
... More
SCHEDULE A PART- VIII (TAXI TRACK NON LOAD BEARING SURFACE)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part VIII
1
7568476
-
... More
SCHEDULE A PART- IX (TAXI TRACK LOAD BEARING SURFACE)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part IX
1
35967399
-
... More
SCHEDULE A PART- X (LIGHTENING PROTECTION)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part X
1
196904
-
... More
SCHEDULE A PART XI (EXTERNAL WATER SUPPLY)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part XI
1
177706
-
... More
SCHEDULE A PART- XII (ROAD/PATH AND CULVERT)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part XII
1
13915575
-
... More
SCHEDULE A PART- XIII (DEMOLITION AND DISMANTLING)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part XIII
1
106261
-
... More
SCHEDULE A PART- XIV (AIR CONDITIONING)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part XIV
1
1305993
-
... More
SCHEDULE A PART- XV (FOD TRAP)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part XV
1
1383934
-
... More
SCHEDULE A PART- XVI (EARTHWORK AND SITE CLEARANCE)
-
-
-
... More
Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part XVI
1
8466870
-
... More
Sch A Part XVII (Miscellaneous Items of B/R and E/M)
-
-
-
... More
M & L for Construction of Septic Tank for 25 users including necessary earth work in excavation in any type of soil , plain cement concrete 1:2:4 type B-2 ( using 40 mm graded crushed stone aggregate ) as in foundation , brick work in cement mortar 1:4 , ,reinforced cement concrete M-25 ( design mix) as in slab cover including pre-cast man hole cover slab having 8 mm dia TMT bar reinforcemement @ 75 mm c/c & 6 mm thick mild steel plate embedded all around of cover slab , 15 mm thick plaster in cement sand mortar in 1:4 on wall, vent shaft, sludge chamber , form work to sides and soffits, 150 mm dia SGSW pipe of type SP 1as per IS as inlet & out let pipes up to 3 m from outer face of wall, CI vent pipe, sludge chamber, RCC baffle wall, returning filling & removal etc, complete all as shown on drawings & as specified.
Note: Rate for Earthwotk, PCC, RCC, brickwork etc. all necessary work are deemed to be included in rates quoted
1
-
-
... More
M & L for Construction of Soakage well for 2.40 m dia( internal dia ) & 3.00 m (effective depth ) including necessary excavation in earth work in any type of soil , plain cement concrete 1:3:6 type C-2 ( using 40 mm graded crushed stone aggregate ) as in foundation , brick work in cement mortar 1:4 in walls & honey combed brick wall , reinforced cement concrete M-25 ( design mix) as in slab cover including pre-cast cover slab having 8 mm dia TMT bar reinforced , plain cement concrete band and dwarf wall, form work to sides and soffits of RCC slab & filling with brick bats loose filling complete complete all as specified and shown in drawings.
Note: Rate for Earthwotk, PCC, RCC, brickwork etc. all necessary work are deemed to be included in rates quoted
1
-
-
... More
S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 32 A, 250V, 4P+earth complete all as specified and directed.
4
-
-
... More
S&F Flame proof switch socket & plug combined 25A, 415V, 3P+earth complete all as specified and directed.
4
-
-
... More
S&F Heavy duty Turbo Force (Fully Metal construction) wall mount Air Circulator fan 450mm sweep, 1440 rpm, 4 speed control with regulator, single phase, 230 volts AC, 50 Hz consisting of powerful circulator motor with spiral guard design ensures high air thrust, high torque gear box with safety clutch, broad blade profile for low noise, resettable thermal overloaded protector, oscillating mechanism including making electric connection using three core flexible twisted copper conductor of size 23/0.0076 complete all as specified and directed.
6
-
-
... More
Supply and fix flush mounted factory made VTPN DBs, 415 volt IP - 43 protection IK-09 with metal double door with 200 Amp copper bus bar with 2 neutral bar, earth bar and cables management fully insulated bus bar with set of wire and door earthing with provision of space of 100 amps MCCB as incomer and SP/TP MCCBs as outgoing 4 way complete all as specified and as directed. Note: MCB and MCCB shall be measured and paid separately under respective schedule
5
-
-
... More
Supply & fix LED hanger flood light 150 watt IP-66 having pressure dia cast aluminum housing with heat resistant toughened glass, individual LED lenses, 4kV internal and 10kV external surge protection, min 120 lm/watt,colour Temperatur 6000 to 6500 K,PF0.95,CRI75,and THD10,230 volts AC 50Hz , internal wiring with bracket and suitable for mounted on floor complete all as specified and directed. Note: Provison shall be made for the Ceiling light fittings/Fixtures and accordingly hooks/hanging arrangement shall be provided at time of roof casting complete all as specified and directed
20
-
-
... More
Supply & fix LED hanger flood light 100 watt IP-66 having pressure dia cast aluminum housing with heat resistant toughened glass, individual LED lenses, 4kV internal and 10kV external surge protection, min 120 lm/watt, internal wiring with bracket and suitable for mounted on floor complete all as specified and directed.
32
-
-
... More
Supply & fix LED security light 100 watt IP - 65 having pressure dia cast aluminum housing with heat resistant toughened glass, individual LED lenses, 4kV internal and 10kV external surge protection, min 100 lm/watt,colour Temperatur 6000 to 6500 K,PF0.95,CRI75,and THD10,230 volts AC 50Hz internal wiring with bracket and suitable for mounted on floor complete all as specified and directed.
16
-
-
... More
S & F of 3P+N+Earth, 63 Amp capacity having five pin and earth plug with socket in sheet metal enclosure along with one No. TPN MCB of suitable rating complete all as specified and directed.
2
-
-
... More
S&F RJ 11 Tele Jack single with shutter 1 module complete with GI box and front cove complete all as specified and directed.
3
-
-
... More
S&F TV socket Jack single with shutter 1 module complete with GI box and front cove complete all as specified and directed.
2
-
-
... More
M&L for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50Mtrs below ground level) connected to GI wire 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm GI tubing medium grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, PCC chamber using PCC(1:3:6) type C-1 using 20mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally up to 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on Electrical plate No.3 of SSR Part-I (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results (in white) on a black painted M.S. Plate (size 300x300x3mm th) duly welded with angle iron of size 40X40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.
Note :- (i) GI wire and GI pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing. (ii) Excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) The rates quoted by the contractor are deemed to be included for MS sheet of size 300x300x3mm th, fixed with necessary nuts and bolts on angle iron of size 40X40x5mm, 60cm long and grouted with PCC block of size 200x200x250mm(PCC 1:3:6 using 20mm grade stone aggregate including necessary earth work for marking the result and purpose.
4
-
-
... More
M&L for Chemical Earthing by drilling a hole of 100 mm dia and 4 Mtr in depth in any kind of soil and providing a 3.0 mtr long pure copper strip of size 32mm x 6mm duly encapsuled in a medium grade Galvinized Steel pipe of size 88mm (OD) and filling the hole with advance non toxic earth enhancing backfill compound (qty not less than 30 Kgs) and water till complete soaking of Chemical- water mixture and providing a cylindrical type FRP earth pit chamber of size 254mm dia at top, 330mm dia at bottom and 260mm height and 7.50 Mtr long copper strip of size 32mm x 6mm as earth lead conductor duly protected with a 65mm bore medium grade GI pipe (from terminal point to earth test point) and duly connected with the terminal point through brazing and to connect with earth test point with brass bolts, nuts and washers of suitable size and fixed on the walls by mounting the strip on FRP / DMC Bridge insulators and providing a test point terminal block made of Gun Metal or Phosphorus Bronze of size 75mm x 75mm x 25mm, duly drilled and screwed and fixed on wall on insulators including 3 Nos 8mm dia 25mm long hex head brass screw complete with removing of excavated soil to a distance not exceeding 50 Mtr and at a height not exceeding 1.5 Mtr from the starting point and testing on completion all as specified and as directed.
Note : (i) The additional length of earth lead conductor beyond 7.5 Mtr (if required at site) shall be measured and paid separately under the respective item (ii) Earth resistance should be maximum 1 ohm. In case the same is not likely to be achieved. The contractor will go for additional depth & soil treatment so as to achieve maximum 3 ohm resistance. Without any extra cost
8
-
-
... More
M&L for Earth obtained from outside defence land exceeding 1.5Km but not exceeding 5.0Km including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling and finishing to required size, shape etc. complete all as specified and directed.
7227
-
-
... More
Supply & Fix voltage stablizer for automatic operation, single phase nautrally air cooled indoor type & designed for input variation between 170 V to 250 V with out put voltage stablizer at 230 V with accuracy of + 2.5% and of capacity 4 KVA complete all as specified and directed.
7
-
-
... More
M&L for earthing comprising of copper earth plate electrode 600 mm X 600 mm X 3.15 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to copper earth strip of size 20 X 3 mm by means of nut-bolts, check nuts and washers of copper all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust and common salt all around the earth plate in alternate layers minimum 150 mm (compacted thickness) in all directions with and including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover of size 450 mm X 450 mm in cement concrete 1:2:4, type B-1, duly reinforced with 8 mm dia mild steel TMT bars @ 100 mm both ways center to center with suitable lifting handle made of 10 mm dia mild steel round bar to lift the cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 40 mm bore including testing on completion of job complete all as specified and directed. Note:- Earthwork, PCC, RCC work, steel work, GI pipe etc. which are mentioned above are deemed to be included in rates.
16
-
-
... More
Supply and fix PCC block of size 300 mm x 300 mm fixing on floor/roof including necessary connection of strip on top surface complete all as specified and directed.
21
-
-
... More
M&L for horizontal boring below pavement/road, in soft/loose soil for crossing 50 to 25mm size CI/GI pipe line complete all as specified and directed.
10
-
-
... More
S&F mono block pump of capacity 1 HP/.75 KW single phase of 220 volt ISI marked complete all as specified and directed.
1
-
-
... More
S&F DOL starter including single phase preventer (3–10amp relay range) suitable for mono block pump of capacity upto 2 HP, 220 Volt, single phase with suitable size of copper lugs/ISI marked complete all as specified and directed.
1
-
-
... More
M&L for brick masonry valve pit of size 90cm x 90cm x 60cm (internal dimensions) depth of chamber to be reckoned from top of PCC in foundation to the top of MS cover as 60cm and including MS sheet cover fabricated from 3.15mm thick MS sheet and frame of angle iron 50mm x 50mm x 6mm with fixing arrangements, hinges and locking arrangement and painting two coat of synthetic enamel paint over a coat of red oxide primer on MS cover and frame, including necessary excavation and earthwork in any type of soil, returning filling in approved soil disposal of surplus soil to a distance not exec. 50m, 150mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, brick work in cement mortar (1:6) 15mm thick plastering in cement mortar (1:4) (both internally and externally) 100mm thick PCC(1:2:4) type B-1 using 20mm graded stone aggregates as in flooring complete all as specified and directed.
1
-
-
... More
M&L for brick masonry valve pit of size 1050 x 1050 x 1050mm (internal dimensions) depth of chamber to be reckoned from top of PCC in foundation to the top of MS cover as 60cm and including MS sheet cover fabricated from 3.15mm thick MS sheet and frame of angle iron 40mm x 40mm x 6mm with fixing arrangements, hinges and locking arrangement and painting two coat of synthetic enamel paint over a coat of red oxide primer on MS cover and frame, including necessary excavation and earthwork in any type of soil, returning filling in approved soil disposal of surplus soil to a distance not exec. 50m, 150mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, brick work in cement mortar (1:6) 15mm thick plastering in cement mortar (1:4) (both internally and externally) 100mm thick PCC(1:2:4) type B-1 using 20mm graded stone aggregates as in flooring complete all as specified and directed.
1
-
-
... More
M&L for Chemical Earthing with copper earth plate electrode 900 x 600 x 5 mm thick buried directly in ground, earth pit not less than 4.70 metres below normal ground level and complete size of pit shall be 1.60 m x 1.60 m x 5.10 metres, with top edge of the plate not less than 3.60 metres below normal ground level, earth plate surrounded from all sides by 20 cm thick salt and charcoal dust and Magnesium sulphate filling in alternate layers of 20 cm thick up to 1.8 metres height and including connected to copper strip 25 x 3 mm (up to 7.5 Metres) by means of brazing / coppers nut-bolts, earth strip protected with 65mm bore light grade GI pipe from electrode and up to the earth test point, 15 mm bore light grade GI watering pipe, GI funnel, wire mesh, earth plate surrounded from all sides by 20 cm thick salt, charcoal dust and Magnesium sulphate filling in each alternate layers up to 1.80 m height including excavation, removal surplus soil to a distance not exc. 50 m, PCC pit in PCC (1:3:6) type C-1, using 20 mm graded stone aggregate, RCC cover 40 mm thick in RCC (1:2:4) type B-1, using 20 mm graded stone aggregate reinforced with 8 mm dia mild steel deformed bars @ 75 mm centre to centre both ways complete all as specified and directed.
1
-
-
... More
Horizontal Boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes up to 100 mm bore and making good the disturbed surface complete all as specified and as directed.
Note: GI pipe will be measured and paid separately.
42
-
-
... More
Design, supply, erection, testing and commissioning of outdoor type LT Feeder Pillar box, overall size not less than 1800 mm wide X 1200 mm High (With Canopy and Base Channel) X 400 mm Deep, comprising mild steel channel Base Frame mounted (to be mounted on the 3 sides covered brick pedestal of height 450 mm above ground level), suitable for 3 phase, 4 wire, 415 volts AC supply, having 4 Nos. aluminium bus bars of rating 400 Ampere, provision of Spreader link to both incoming and outgoing side of MCCBs for termination of cables and 4 way ebonite cable connector (rating 32 Ampere) for termination of outgoing cables for MCBs.
1
-
-
... More
The Feeder Pillar shall be duly fabricated in a approved / certified factory / fabrication house who possesses type test certificate from CPRI for similar type of Feeder Pillar and having modern fabrication and testing facility which includes at least seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL-7032 (SIEMENS GRAY). The Feeder Pillar shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection shall not be less than IP-54 and general construction conforming to IS-13947. The feeder pillar shall be made out of 3.15 mm thick CRCA mild steel sheet and 3.15 mm thick gland plate and having compartmentalized construction for individual switchgears and Bus Bars and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolt. The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the following: -
-
-
-
... More
(A) PROVISION FOR CABLE ENTRY
The provision of cable entry / exit shall be provided from the bottom for both incoming and outgoing cables. (B) BUS BARS AND INTERNAL CONNECTIONS
The bus bars should be made of Aluminium, duly insulated with 1100 volts grade standard colour coded heat shrink type PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustible, track resistant, high strength FRP / SMC / DMC material. 4 Nos. Aluminium bus bars of rating 250 Ampere. All internal connections from main bus bars to switch gears shall be carried out with suitable size FRLS grade PVC insulated multi core flexible type copper wire as per the current carrying capacity of individual switch gears. Earthing bar shall be provided as per standard practice and shall be made of Galvanized Steel flats of size 25 mm X 6 mm.
(C) CONTROL WIRING
All control wiring shall have to be carried out with 1100 volts rated FRLS grade PVC insulated (Gray Colour) multi-flexible type copper wire of cross sectional area 1.50 Sq.mm and shall be properly bunched, tied and dressed, ferrule marked for proper identification and crimped with suitable size and type of tinned copper lugs and shall be wrapped with PVC spring type flexible pipes near the door hinges.
-
-
-
... More
(D) INCOMING 4 pole MCCB having breaking capacity of 25 KA, fixed magnetic and fixed thermal setting (100% - 80%) of rating 160 Ampere- 01 No.
(E) OUTGOING
(i) MCCB 63 Ampere, 16 KA, 4 Pole Adjustable thermal (100% - 80%) and fixed magnetic setting- 05
-
-
-
... More
(F) MISCELLANEOUS ITEMS
(i) Single pole, MCB 6 Ampere, 10 KA (For Control Wiring)- 01 No.
(G) INSTRUMENTATION SYSTEM
(i) LED Phase Indicating light, shrouded type, 22 mm with cluster LED- 01 set of 3 lamps (RYB)
(ii) Digital Volt Meter 0-500 Volts (96 mm X 96 mm), 4 1/2 digit, Accuracy Class 1%- 01 No
(iii) Digital Ammeter 0-500 Ampere (96 mm X 96 mm), 4 1/2 digit, Accuracy Class 1%- 01 No
(iv) CT having Ratio 300/5, tape wound, BPL, rated burden 5 VA- 03 Nos.
-
-
-
... More
Dismantaling, shifting, re - Installation of existing of Elevated HIRL / MIRL Runway / Taxiway / Turning pad fitting i/c installation of isolating transformer, crimping/jointing of plug & receptacles, laying of secondary leads, i/c supply of all materials complete all as specified and directed
12
-
-
... More
Removal of primary cables with HDPE conduit and GI wire from existing location and serviceable material handed to AF authority complete all as specified and directed.
1500
-
-
... More
M & L for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow with adequate Nos of coats complete all as specified and directed.
30
-
-
... More
Material,Laying and compacting 200 mm thick (Compacted thickness) in two layer 100 mm each wet mix macadam (WMM) grading as per Table 400-13 of Morth specification for road and bridge works,2013 in two layers of 100mm each, manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of atleast 98% of the maximum dry density. Consolidating to required gradient and camber Complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH 2013 complete all as specified and directed.
330.75
-
-
... More
S&F sink mixer complete all as specified and directed
2
-
-
... More
S&F CP Health faucet (ABS Body) stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
6
-
-
... More
Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilizer at 230 V with accuracy of ±2.5% and of capacity 4 KVA complete all as specified and directed
8
-
-
... More
M&L for plastic PVC fixed complete to wall ceilings or in floors etc size 25mm dia of pipe including chase cutting on walls and making a good as per existing as specified and directed
30
-
-
... More
Supply and fixing LED based flame proof light fixture 120W 230 V AC outdoor type new generation energy saving and environment friendly long life, pressure die-cast aluminium housing flood light with PC diffused lens enclosure over LED for glare free light with complete accessories all as specified and directed
20
-
-
... More
Supply and fixing LED based flame proof light fixture 100W 230 V AC outdoor type new generation energy saving and environment friendly long life, pressure die-cast aluminium housing flood light with PC diffused lens enclosure over LED for glare free light with complete accessories all as specified and directed
16
-
-
... More
M&L for Boring of holes under PTT/Runway, Road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe 100mm dia suitable for 0.4Mpa working pressure complete all as specified and directed
20
-
-
... More
M&L for Cutting of existing CI/DI/GI pipe 80 mm bore and inserting TEE 80x80x50 mm with all connected accessories complete all as specified and directed
1
-
-
... More
Design, supply, erection, testing and commissioning of outdoor type LT Feeder Pillar box, overall size not less than 1200 mm wide X 1000 mm High (With Canopy and Base Channel) X 450 mm Deep, comprising mild steel channel Base Frame mounted (to be mounted on the 3 sides covered brick pedestal of height 450mm above ground level), suitable for 3 phase, 4 wire, 415 volts AC supply, having 4 Nos. aluminium bus bars of rating 600 Ampere, provision of Spreader link to both incoming and outgoing side of MCCBs for termination of cables and 4 way ebonite cable connector (rating 32 Ampere) for termination of outgoing cables for MCBs.
1
-
-
... More
The Feeder Pillar shall be duly fabricated in a approved / certified factory / fabrication house who possesses type test certificate from CPRI for similar type of Feeder Pillar and having modern fabrication and testing facility which includes at least seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL-7032 (SIEMENS GRAY). The Feeder Pillar shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection shall not be less than IP-54 and general construction conforming to IS-13947. The feeder pillar shall be made out of 3.15 mm thick CRCA mild steel sheet and 3.15 mm thick gland plate and having compartmentalized construction for individual switchgears and Bus Bars and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolt. The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the following:
-
-
-
... More
(A) PROVISION FOR CABLE ENTRY
The provision of cable entry / exit shall be provided from the bottom for both incoming and outgoing cables. (B) BUS BARS AND INTERNAL CONNECTIONS
The bus bars should be made of Aluminium, duly insulated with 1100 volts grade standard colour coded heat shrink type PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustible, track resistant, high strength FRP / SMC / DMC material. 4 Nos. Aluminium bus bars of rating 1000 Ampere. All internal connections from main bus bars to switch gears shall be carried out with suitable size FRLS grade PVC insulated multi core flexible type copper wire as per the current carrying capacity of individual switch gears. Earthing bar shall be provided as per standard practice and shall be made of Galvanized Steel flats of size 25 mm X 6 mm. (C) CONTROL WIRING
All control wiring shall have to be carried out with 1100 volts rated FRLS grade PVC insulated (Gray Colour) multi-flexible type copper wire of cross sectional area 1.50 Sq.mm and shall be properly bunched, tied and dressed, ferrule marked for proper identification and crimped with suitable size and type of tinned copper lugs and shall be wrapped with PVC spring type flexible pipes near the door hinges.
-
-
-
... More
(D) INCOMING
4 pole MCCB having breaking capacity of 36 KA, fixed magnetic and fixed thermal setting (100% - 80%) of rating 250 Ampere- 01 No. (E) OUTGOING
(i) MCCB 125 Ampere, 25 KA, 4 Pole Adjustable thermal (100% - 80%) and fixed magnetic-03 Nos (ii) MCCB 40 Ampere, 16 KA, 4 Pole Adjustable thermal (100% - 80%) and fixed magnetic setting- 01 No.
(F) MISCELLANEOUS ITEMS
(i) Single pole, MCB 6 Ampere, 10 KA (For Control Wiring) - 01 No.
-
-
-
... More
(G) INSTRUMENTATION SYSTEM
(i) LED Phase Indicating light, shrouded type, 22 mm with cluster LED- 01 set of 3 lamps (RYB)
(ii) Digital Volt Meter 0-500 Volts (96 mm X 96 mm), 4 1/2 digit, Accuracy Class 1%- 01 No.
(iii) Digital Ammeter 0-500 Ampere (96 mm X 96 mm), 4 1/2 digit, Accuracy Class 1%- 01 No.
(iv) CT having Ratio 300/5, tape wound, BPL, rated burden 5 VA- 03 Nos.
(v) Voltmeter selector switch (6 Amp), 3 position with 'OFF'-01 No
(vi) Ammeter selector switch (6 Ampere), 3 position with 'OFF - 01 No.
(vii) Danger Notice Plate duly written in Signal Red colour on Aluminium plate in English and Hindi language and of size not less than 150 mm X 100 mm- 02 Nos
-
-
-
... More
NOTE: - All incoming and outgoing feeders to be marked with aluminium name plates duly riveted on the front inner door of the feeder pillar. All the cable entry / exit will be through bottom only, duly glanded with single compression type brass cable gland of suitable size. Cost of end termination of cable shall deemed to be included in the cost of feeder pillar. All the inner / outer doors should have locking facility through castle locks. Cost of all civil work for brick pedestal, duly plastered, shall deemed to be included in the unit rate quoted, no separate payment shall be allowed for this. The dimension of Panel Board as mentioned above is tentative. If it is required to be enhanced to accommodate the switchgears and maintaining the gaps as per lE Rules, it should be enhanced as per requirement without any extra cost to the department. The thickness of mild steel sheet for outer shell and canopy shall be of 3.15 mm and inner doors and partitions shall be of 2.00 mm. The Panel Board should be designed in such a way that adequate workable space is made available inside every compartments. The drawing of the Panel Board shall have to be got approved by Garrison Engineer before starting of fabrication process.
-
-
-
... More
Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI strips of size 32 x 6 mm as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire mesh. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion complete all as specified and directed.
Note: Rate for Earthwotk, PCC, GI pipe, CI cover etc. are deemed to be included in rates quoted
2
-
-
... More
M&L for horizontal boring under road/pavement hard standing complete by trenchless the technology using ultra sound technique and necessary machine including HDPE PN 10 Pipe of 150 mm dia suitable for 0.4 Mpa working pressure complete all as specified and directed
20
-
-
... More
Supply and fixing cable pointing kit for 1.1 KV grade for straight through joint complete with jointing material heat shrinkage type and accessories suitable of 3.5/4 core XLPE armoured aluminium conductor cable of size 240 sqmm cable complete all as specified and directed
1
-
-
... More
S&F three core PVC consulated flexible copper cord 1.5 square mm multi standard copper conductor flexible cable 1100 volts grade complete and making connection from pole box to flood light complete all as specified and directed
136.5
-
-
... More
Supply and fixing junction box made out of 3.15 and thick MS sheet powered coated with locking arrangement of size (30x15x8 cm) including 01 No 6 Amp SP MCB, 2 Nos bus bar of suitable size with suitable number of holes fixed on street light pole with table MS clamps complete all as specified and directed
13
-
-
... More
Supply and fixing street light fitting 40 W green line V2 green lines in an IP-66 Road lightning luminaire with high power LED and unique peanut lens toesure uniformly distribution higher spacing between pole and maintenance free system type complete all as specified and directed
13
-
-
... More
M&L for laying brick as in production cover over cables using well burnt sub class B old size bricks in trenches overs and questioning complete all as specified and directed
6.8
-
-
... More
M&L for LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 25 users With UPFLOW FILTER INLCUDING MEDIA complete all as specified and directed
1
-
-
... More
M&L for construction of Soakage well for 2.4 m Dia (internal) and 3.0 m effective depth including necessary excavation in type of soil plain cement concrete 1:3:6 type C2 (using 40m graded crushed stone aggregate) as in foundation brick work in CM 1:4 in walls and honeycombed brick wall reinforced cement concrete M-25 design mix as a slab cover including pre cast covers lab having 8mm TMT bar reinforced plan cement concrete band and dwarf wall, formwork to sides and soffits of RCC slab and filling with brick bats loose filling complete all is specified and shown in drawings
1
-
-
... More
S&F PVC (SWR) casing pipe 250 mm dia bore medium grade 6 Kg/Sqcm ISI marked plain with bail plug at the bottom of each bore complete all as specified and directed
64
-
-
... More
S&F PVC (SWR) slotted pipe 250 mm dia bore medium grade 6 Kg/Sqcm ISI marked plain with bail plug at the bottom of each bore complete all as specified and directed
154
-
-
... More
M&L for drilling 500-550 mm dia bore holes by DTH come rotary method at any depth as in any type of soil maximum up to 40 m depth from natural ground level and including removal of surplus soil to a distance not exceeding 50m complete all as specified and directed
64
-
-
... More
Deduct Schedule of Credit of Rs. 1,38,386.16 as brought out from Sr Page No. of tender
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%