Meerut Development Authority Tender

Supply and Fixing 3 Watt Ingrovnd Foucs Light/burial Uplighter. (Lustre, JAQUAR, VSTP OR Equivalent) As per Direction of E/I.

Supply and Fixing 10 Watt Under Water Foucs Light. (Lustre, VSTP JAQUAR OR Equivalent) As per Direction of E/I.

Supply and Fixing 15 Watt LED Floor Light. (Lustre, VSTP JAQUAR OR Equivalent) As per Direction of E/I.

Supply and Fixing 6 Watt well Mounted Steps/ Ramp Light. (Lustre, VSTP JAQUAR OR Equivalent) As per Direction of E/I.

Supply and Fixing 15 Watt Bollard Light. (Lustre, VSTP, JAQUAR OR Equivalent) As per Direction of E/I. (SOR/2018 SI No.-1442)

Supply and Fixing 100 Watt Signage Light. (Lustre, VSTP, JAQUAR OR Equivalent) As per Direction of E/I.

Supply and Fixing 6 Watt tree uplight. (Lustre, VSTP, JAQUAR OR Equivalent) As per Direction of E/I.

Supply and Fixing 6 Watt Shrub upligter. (Lustre, VSTP, JAQUAR OR Equivalent) As per Direction of E/I.

Supply and Fixing 50 Watt VE and Under Seat Light (Strip light) (Lustre, VSTP, JAQUAR OR Equivalent) As per Direction of E/I.

Supply and Fixing 150 Watt HT Seculpture Mashal Clump of 3 H Focus Uplighter High Illuminance. (Bajaj, Philips, Cropton, Lustre) As per Direction of E/I. (SOR/2018 SI No-1454 Cat-AA)

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 min/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and Conly. sI no- 801/2018

Incoming 100 Amp TPN-1 No

Outgoing 32 Amp. TPN- 3 Nos

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. S.I No.-501/2018 (If Cable are Laying in HDPE Pipe Rate will be Deduct 170 per mtr.

10 sqmm x 4 Core (H)

16 sqmm x 4 Core (I)

25 sqmm x 3.5 Core (J)

50 sqmm x 3.5 Core (L)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SI NO. 504/2018

10 sqmm (C)

16 sqmm (D)

25 sqmm (E)

50 sqmm (g)

S/F of 40A TPN, capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting Of time switch TSO 100 serics with contactor, HRC fuse, isolated switch metring instrument and instrument box with CTs etc. in case of TPN, complete in all respect. SI NO. 807 F (ii)/2018 As per Direction of E/I.

S/L of 63mm HDPE pipe for road crossing etc. (PSR) As per Direction of E/I.

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing SI No-701/2018

Supply and Fixing of End Cover for 400 Amp sandwich Al bus bar trunking complete in all respect. SI No-944/2018 As per Direction of E/I.

Supply and Fixing 25 mm PVC Pipe. (DSR 2022 145 - 18 % G.S.T. Rs 32.68 = 112.32 As per Direction of E/I.

Supply and Fixing 6 AMP to 32 AMP Sp MCB (10 KA) C Curve SI No-1002/2018 As per Direction of E/I.

Supply and laying 2.5 x 2 Core Copper Wire (PSR) As per Direction of E/I.

Making Maunal Trench less/ Road Cutting (PSR) As per Direction of E/I.