Meerut Development Authority Tender

Supply of Solar A10 Single piece High pressure Die cast (LM6 Alloy) Aluminum housing appearance of Solar AID shall be traditional Street Light, IP65 & IKO8, OD shall be flexible for post mounting as well as Street mounting, having Min 4500 lumens in 26W. Suitable for 24hrs (2 Nights) Autonomy and its backup calculation sheet shall be approved by Engineer-In-Charge. Ferro phosphate Battery capacity min 30Ah@12.8V or 384Wh & shall be of fresh manufactured battery (Not re-used cells) Battery Temp range -20-+60°C and panel capacity min 35Wp, CRI =70, Efficacy Min 175Im/W is MUST, system wattage should not be more than 26W ± 5%. Life class of LED System 50000hrs@L70, LED Make - CREE/NICHIA/LUMILEDS/OSRAM. CE Certified, charger efficiency 90%and standards IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384 The PV module should be made up of crystalline silicon solar cells "Mono-Crystalline" and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp 0 Degree C to 50 Degree C, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory, Warrantee shall be 5 years. Model No- Philips Sunstay or Equivalent in Crompton /Wipro.

Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.Make- Philips, Crompton Bajaj.

1.The above rates are excluding G.S.T 2.G.S.T will be paid extra as applicable